1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Connectors banna gold 5,5 mm (M/F)
1 x XH female balance (3S) connector (2 pcs)
2 x Optotronix Aurora Plug
2 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Connectors DEANS 4 pins (1 pair)
2 x Banna gold connector 2,5 mm (M/F)
1 x Connector CAN 15
2 x Conector BEC female (10 pcs)
1 x XH male balance (2S) connector (2 pcs)
1 x Connectors DEANS (T)
1 x Gold antispark 4 mm plug
1 x Connectors banna oro 8,0 mm (M/F)
1 x XH female balance (4S) connector (2 pcs)
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
2 x Connectors banna oro 6,0 mm (M/F)
2 x MPX Sub-D Adaptor
1 x Ventus 1:4 set of instruments
1 x Conector BEC male (10 pcs)
2 x Conector AS150 7mm antichispazo (Set: 2 pares)
2 x XH female balance (2S) connector (2 pcs)
1 x Connectors banna oro 0,8 mm (M/F)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x XH male balance (4S) connector (2 pcs)
1 x XH male balance (3S) connector (2 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Quicklock washer 4 mm (10 pcs)
1 x L-Connector 4.0 mm x 1000 mm
2 x Ball link Aluminio M3 (2 pcs)
1 x Oils Pumps Empty (1 liter)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Baseplate servo
1 x Hot Glue Stick BLACK
1 x 
1 x 40 mm air cylinder
1 x Mini neumatic retract 4 mm landing gear (Het-rc)
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Manometer 4 mm
1 x Mini neumatic retract landing gear
1 x Angled clevis with threaded rod M3
1 x Cable coupler M3 (10 uds)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x VIPER SL NAVY PNP 2270 mm
1 x VIPER SL Thunderbird PNP 2270 mm
1 x BD-5J ARF+
1 x Soldering PCBs 8pin, 5 pieces
1 x Connectors MPX male
1 x Bag connector 2 mm
1 x FOD Screen K45/60/70/85
1 x Pendulun "Special" to tank 60g
1 x Fod Guard 94x34 mm
2 x 40 mm servo arm with bearing (2 pcs)
1 x PBS TJ 40-G2 Turbine
1 x Jet Pipe 40N-80N (200 mm)
1 x ABS 500 x 400 x 0,5 mm (white)
2 x Bluetooth Adapter JET CENTRAL
1 x FOD Screen K140G/K180G/K210G
1 x Fod Guard 73x32 mm
1 x ABS 500 x 400 x 1,5 mm (white)
1 x JETCAT ADITIVO ANTIESTATIC 120ml
1 x Telemetry SPEKTRUM
1 x Fod Guard 67x32 mm
1 x Fod Guard 83x32 mm
2 x Jet Pipe 160N-250N (120/130 mm)
1 x Smokelance
2 x Jet Pipe for A-10 Skymaster (set 2 pcs)
1 x Tailormade cone A-10 Skymaster
1 x LASER 260 60" V2 ARF Red (SkyWing)
1 x SLICK 360-A 104" (2640 mm)
1 x EDGE 540-A 74" (1880 mm)
1 x EDGE 540-A 105" (2660 mm)
1 x BALSA trip 5.0x5.0x1000 mm
1 x Horn 13,5x16 mm (2 pcs)
1 x Extension 7.5 cm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x 3D Spinner for DLE 30
1 x Spinner 115 mm GFK
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Tip wing protector 28x10x12 (2 pcs)
1 x 51 mm aluminium spinner.
1 x Spinner 140 mm GFK
1 x Motor holder AXI
1 x VIPER SL YELLOW PNP 2270 mm
1 x 89 mm double servo arm with bearing (2 pcs)
1 x FELIX SportJet Blue 2200 mm
1 x Aramid 50 daN 50 m
1 x Ballast 700gr OPALE
1 x XICOY X45 rail
1 x Glider STROLCH
1 x X-RAY Micro QR (Tail Tube)
1 x UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x XT-30 connector (pair)
1 x Cooler motor type 280
1 x Receiver bed (Blue)
1 x Indoor motor holder
1 x Motor Mount for Multiplex FunJet
1 x Motor mount M
1 x Metalic motor holder for class 550-600
1 x 
1 x Trailing leg 131 mm
1 x Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x 50 mm servo arm with bearing (2 pcs)
1 x Paramotor Trike XL
1 x Wing OXY 5,0 m2
1 x LUCAS pilot ARTF
1 x Paramotor BackPack XXS (without accessories)
1 x Paramotor Kit Camo H1.5/ Ben Red
1 x Paramotor BackPack XXS 2
1 x X-RAY Micro QR (Rudder)
1 x Jeemo Dolly
1 x E-FUN BUG (ROI-Import)
1 x JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x X-RAY Micro QR (Fuselage with canopy)
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x BABY glider (Aero-naut)
1 x Wings Bags JEEMO
1 x X-RAY Micro QR
1 x Glider IKARUS
1 x Conector male bateria 1s Kavan/Walkera 10cm cable
1 x Conector MR-60 (pareja)
1 x Carbon plate 350x150x3.0 mm
1 x Conector JR Servo female (10 pcs)
1 x CARBON CUB 15cc ARF 2280 mm
1 x Jet Pipe for ULTIMATUM 2m
47,677.50EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies