430.00EUR 375.00EUR

MZ-18, 9 Channel HoTT
[GRAS1005]


Description:
Graupner/SJ mz-18 HoTT 2.4GHz 9 Channel transmitteris designed with Graupner/SJ's unique telemetry technology that support Bi-directional data transmission gives user the real-time information. The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference. mz-18 has 30 model memories and it is suitable for any aircraft, Aditionally, with up to 9 available channels, built-in telemetry with data logging capabilities and 3.5" large TFT LCD with specialized touch pannel, mz-18 is the obvious choice for anyone who needs a high quality 9 channel radio.

Features:
- HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4 GHz technology
- The use of up to 75 frequency hopping channels ensures extreme operating reliability and immunity to external interference.
- 3.5" clolor TFT LCD with specialized touch pannel and user friendly interface
- Smart voice announcement system (Speaker and Earphone) for warnings and alarms at real time
- Real-time data analysis with optional sensor (GPS, Fuel status, Temperature, Voltage, Current) and sensor board (General air module, General engine module)
- Real-time telemetry analysis for Brushless Control Telemetry ESC such as RPM, consumption current, voltage, ESC temperature, Warning'
- Advanced HoTT wired/wireless trainer system
- Multi binding receiver system that 2 receivers can be connected in paralleled to use additional servos
- High-precision quad ball bearing gimbals (total 8ea) lead the smooth and comfortable stick feeling
- Standard micro SD Memory cards to sharemodel setup, expand model memeory
- 30 model memories
- Model copy function for model memories
- Staying up to date with the latest Graupner/SJ Firmware

- Programming options:
- 30 model memories(Available to expand model memory, using SD card)
- 6 Q.link functions
- 3 Model types(Helicopter, Airplane, Glider)
- Helicopter Function
- Q.link function x 6
- 6 swash plate types (1 Servo, 2 Servo 180, 3 Servo 120, 3 Servo 140, 3 Servo(Elevator), 4 Servo 90)
- Pitch Curves (7-point)
- Throttle Curves (7-point)
- Pitch, Throttle Trim function x 6
- Swash Limit function
- Swash Limit mix function
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Throttle mixing function (AILE>>THRO, ELEV>>THRO, RUDD>>THRO)
- Airplane Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Snap roll function
- Aileron Diff function
- Flap sett function
- Airbrake function
- Idle Low function
- Glider Function
- Q.link function x 6
- 8 wing type (Delta wing included)
- 3 tail type
- Wing mixing (RUDD>>AILE, AILE>>RUDD, RUDD>>ELEV)
- Program mixing x 8 (Liner Program mixing x 5, Curve mixing x 3)
- Aileron Diff function
- Flap MIX function (FLAP, AILE>>FLAP, ELEV>>FLAP, FLAP>>ELEV)
- Flap sett function
- Butterfly function

Specification:
- Control function: 9
- Temperature range: -10...+55 °C
- Aerial length: 120 mm
- All-up weight, approx.: 840 g
- Frequency: 2400...2483,5 MHz
- Range approx.: 4000 m
- Dimensions (LxWxH): 194x287x112 mm
- Modulation: FHSS
- Charging rate: 510 mA
- Operating voltage: 3,4...6,0 V
- Warnhinweis: Warnhinweis_14+_EN




temporarily out of stock
temporarily out of stock

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
      Futaba
      Graupner
      Jeti
      Jeti Accesories
      Multiplex
      Multiplex Accesorios
      PowerBox CORE
      RCM Pelikan
      Secraft
      Spektrum
      FrySky
    Receivers->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Nylon hinge 20x20x0,3 (10 pcs)
2 x Gates hinge 30x16 mm (2 pcs)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Miniature brass strap hinge, 1 m
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Small pinned hinge (12 uds)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Extension MPX-MPX 20 cm
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Gates hinge
1 x Crimping tool
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Starter EM Gear Power 80
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Large flex hinge (12 uds)
1 x Pin type hinge Al 6x98 mm (2 pcs)
2 x Gates hinge aluminium (1 pcs)
1 x Micro flex hinge (12 uds)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x 15 mm reinforced hinge
1 x 25 mm reinforced hinge
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Long pinned hinge (12 uds)
1 x Long pinned hinge (6 uds)
2 x Nylon hinge for flaps 33x9 (2 pcs)
1 x 30 cm DEANS female connector
1 x Connectors banna oro 8,0 mm (M/F)
1 x XH female balance (5S) connector (2 pcs)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x Connector CAN 15
1 x Connectors banna gold 5,5 mm (M/F)
1 x Gold antispark 5,5 mm plug
1 x Connectors banna oro 6,0 mm (M/F)
1 x XH female balance (4S) connector (2 pcs)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Conector Servo female 4 pines
1 x XH male balance (5S) connector (2 pcs)
1 x Connectors DEANS (T)
1 x Connectors DEANS 4 pins (1 pair)
1 x Big-Malibu XL Roof box with surfboard rack GREY
1 x Strip ABS 2.0x10.0x1000 mm
2 x ABS Strip 1.5x2.0x1000 mm
1 x Round Rod 1,25x1000 mm
1 x Round Rod 3,0x1000 mm
1 x Round Rod 4,0x1000 mm
2 x ABS Strip 1.5x8.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Round Rod 5,0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
2 x Strip ABS 2.0x5.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Strip 3,5x1,75x330 mm
2 x ABS Strip 1.5x3.0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x Strip 2,5x1,25x330 mm
1 x Strip ABS 2.0x3.0x1000 mm
2 x Strip 1,5x1,5x330 mm
2 x Round Rod 6,0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Profile ABS Square 2 x 1000 mm
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x SE Ring 200 mm (2 pcs)
1 x 1000 ml sealer (DOPE)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x BALSA trip 3.0x3.0x1000 mm
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Beech dowels 3.0 x 1000 mm
1 x Cable Cargador FUTABA
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x SERVO HOLDER
1 x GameCommander USB Universal
1 x USB Adaptor OPTronics
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Pin hinge 26x11 mm (10 uds)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Connectors banna oro 2 mm (M/F)
1 x Protector Connector Dean-T (1 pair)
1 x Flap hinge (6 pcs)
1 x XH female balance (2S) connector (2 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x Conector MR-60 (pareja)
1 x T-Hose connector 2-2-2 mm
1 x Y-Hose connector 2-2-2 mm
1 x XICOY X45 rail
1 x Y-Hose connector 4-4-4mm
1 x Festo Adaptor Tygon Large/4mm
1 x Legs + electric brakes for Viper Jet 90
1 x SU 29S 140 carbon landing gear
1 x Ferrita con funda
1 x IMPULSE 2 F3F
1 x Aero-Master Wings (Aero-naut)
1 x DUPLEX 2.4EX Central Box 220
1 x DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x RF9 Flight Simulator with Spektrum Controller
1 x DELPHIN Race 3.6m c64
1 x T-Hose connector 4-4-4mm
1 x Fascination 3600 mm, Spare Wings (Top Model)
1 x FOX 3000 mm ARF (FMS)
1 x JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x Fail Safe air retract
1 x Y-Hose connector 6-6-6 mm
1 x 160 mm carbon undercarriage (2pcs)
1 x Legs + electric brakes for Viper Jet 1700 mm
1 x 40 mm air cylinder
1 x Avia spare blue cockpit (Top Model)
1 x Set stickers JEEMO "Andy"
1 x T-Hose connector 3-3-3 mm
1 x FOX ARF 2000 mm Red (Hacker Model)
1 x Propeller POWER-PROP 7x7
1 x Surprise XII Horizontal Estabilizer (Freudenthaler)
1 x VIPER 1.7 Electric break wheels + structure
1 x Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x VIPER JET G2 Esq. 5 Green/White/Blue
1 x Bungee HLG Premium
1 x Recessed MPX connector support (6 pcs)
1 x Support ECU Xicoy X-45
1 x Vasa model Catapult
1 x PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x BULLIT Wing 840 mm
1 x Crystal Universal RX 35.130 Ch 73
1 x VIPER JET G2 Esq. 2 White/Red
1 x Indoor Brushed motor kit
1 x Crystal Universal RX 35.120 Ch 72
1 x Crystal Universal RX 35.020 Ch 62
1 x PPS-4D Propeller
1 x VIPER JET G2 Esq. 3 Orange/Black
1 x VIPER 1.7 Tailpipe + Fuel Tank 1500ml
1 x Interface Jack Adapter IKARUS
1 x Crystal Universal RX 35.140 Ch 74
18,278.93EUR
Manufacturers
Manufacturer Info
Graupner
Graupner Homepage
Other products
Languages
Español English
Currencies