Top » Catalog » Hardware » Transmitters/Receivers » Receivers » Hacker » HK22985482

17.45EUR

JETImodel Addcap 820
[HK22985482]

Description:
AddCAP 820 is an add-on capacitor unit designed to enhance battery power supply for drive systems using low-impedence electric motors (1-2 turns). It should also be used when the wires from your battery to your ESC need to be lengthened more than 20cm (8 inches).

In case the wires are longer, use one AddCAP 820 for each 20cm (8 inch) section. Another advantage of adding an additional capacitor is to reduce possible interference which may be caused by current moving through your power wires. Recommended for use with 2.5-6 mm2 (14AWG – 10AWG) wires.

Specificationes:
- Weight: 13 g
- Dimensions: 60x19x18 mm
- Input voltage max. 59 V
- Capacity: 820 mF

few units

Reviews

Customers who bought this product also purchased

TopFuel LiPo 20C-ECO-X 5000mAh 5S MTAG

few units

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
    Receivers->
      Acc/ Telemetria Jeti
      Compatible
      FUTABA
      Graupner
      Hacker
      Hitec
      Jeti
      Mikado
      Multiplex
      PowerBox CORE
      RadioLink
      RCM Pelikan
      Schulze->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

P-47 Thunderbird Deco 02
3,990.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	DUPLEX 2,4GHz MRPM EX
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	DUPLEX 2.4EX MT 125 temperature sensor
1 x	Switch Cap M (black)
1 x	DUPLEX 2,4GHz MRPM-AC EX
1 x	100m servo "Premium" wire (white/red/blue)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	MULTIPLEX ALUMINUM CASE "M-LINK"
1 x	25 mm reinforced hinge
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	DUPLEX 2.4EX RC Switch
1 x	Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x	PVC 0,14 qmm servo wire Futaba (5 m)
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	DUPLEX TGs 2,4 GHz (transmitter module)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Tray for FUTABA 14SG/16SZ
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Red smoke canister 100 g
1 x	Initior Receiver FRX2 Wireless
1 x	Copier 2x20 cm pcs
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Horn 6/20 with M3 Bearing
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x
1 x	Brass control horn M2 large for wire (2pcs)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Contest-S-Pult-Carbon mc-20/mc-24
1 x	Spray adhesive AEROFIX 2
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Charger FUTABA SQN30W12P-08 220v
1 x	DUPLEX 2.4EX MULi 6s M
1 x	WingFix ULTRA Black Edition
1 x	Propeller balancer
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Silicone 0,35 qmm servos cable Futaba (5 m)
1 x	Silicone 0,35 qmm servos wire Graupner(100 m)
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	White silicone 0,25 qmm wire (150 m)
1 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Universal Colour Paste deep black 50 g
1 x	Yellow smoke canister 65 g
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Smoke set "Glider"
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	3,0x60 mm allen screwdriver
1 x	5 mm M2 variable horn
1 x
1 x	Receiver FUTABA R7014SB FASST Test
1 x	Horn 6/27 with M3 Bearing
1 x	1/12 Pilot "Cougar"
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Ball Link Plier
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Adjustable brass horn threaded M3
1 x	1/4 Pilot "Mike"
1 x	5 mm M2 variable inclined horn
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Receiver R6008HV-A comatible FUTABA
1 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	"S" set for boats
1 x	Spray Graphit 33
1 x	DUPLEX 2.4EX MAlti (Rev.2)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Field folding model stand
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Parachute expulsion foam
1 x	Smoke set "M"
1 x	DUPLEX MUI 50 Sensor
1 x	Battery FUTABA 18MZ
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Switch Cap L (Blue)
1 x	Switch Cap M (silver)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Universal Colour Paste deep black 250 g
1 x	Silicone 0,25 qmm servos wire Graupner (100 m)
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	18 mm reinforced hinge
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Smoke set "S"
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	20 g tin paste
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Silicone red 0,25 mm² wire (25 m)
1 x	BALSA triangular 15x15x1000 mm
1 x	Tray for FUTABA 18 SZ
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	DUPLEX MRMP Hall EX
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Partall paste 650 g
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	DUPLEX USB Adapter
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
1 x	Transmitter Balancer Futaba V
1 x	Receiver bed (Blue)
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	DUPLEX 2.4EX Expander E2
1 x	PVC 0,25 qmm servos wire Graupner (5 m)
1 x	Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x	Electric rocket starters (6 pcs)
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
1 x	DUPLEX 2.4EX MUI 150 Sensor
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Angle measurer
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Switch Cap L (black)
1 x	DUPLEX 2.4EX MT 300 EX
1 x	White smoke canister 140 g
1 x	Angle of incidence meter
1 x	Blue smoke canister 100 g
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Futaba Radio Case
1 x	Micro flex hinge (12 uds)
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Horn mando long (2 pcs)
1 x	6 mm M3 variable horn
1 x	6 mm M3 variable inclined horn
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Receptor CORE PBR-26XS 26ch
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Receiver FUTABA R6004 FF FAST
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Horn mando small (2 pcs)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	6 mm aluminium horn with patella
1 x	EC-Cutter
1 x	1/10 Pilot "Jack"
1 x	100g Flux Paste for Silver Solder
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Receptor FUTABA R7208SB FASSTest SBus2
1 x	Piloto JET 1:3,5
1 x	Receiver RSF08SB comatible FUTABA

9,507.28EUR