Top » Catalog » Motors & Turbines » Turbines » kerosene » Jet Central Turbines » JCMAMMOTH25

4,200.00EUR

Turbine MAMMOTH 25.4 Kg
[JCMAMMOTH25]

Description:
The JET CENTRAL TURBINE ENGINES are in its own right a single stage centrifugal flow gas turbine engine, configured to operate as a TURBOJET ENGINE for use mainly, but not exclusively, in remotely piloted fixed wing aircraft. Such aircraft and their control systems must be appropriately designed and constructed to be compatible with the performance of the TURBOJET ENGINE.

Specifications:
- Thrust: 25,49 Kg (56 Lbs.) @ 108,000 RPM
- Idle Thrust: 0.82 Kg (1.8 Lbs) @ 28,000 RPM
- RPM Range: 28,000-108,000 RPM
- Weight: 2.28 Kg (4.9 Lbs) with starter
- Diameter: 124.1 mm (4.881 inches)
- Length: 325.4 mm (13.74 inches), with starter
- Exhaust Temperature: 500°C-750°C (932°F - 1292°F)
- Fuel: Jet A1, 1 -K Kerosene, Diesel
- Fuel Consumption: 0.8 Lt/min (28.5 oz/min) @104,000 RPM; 0.5 Lt/min (17 oz/min) Average
- Lubrication: 2.5% Turbine Oil mixed In the fuel
- Maintenance Interval: 25 hours

temporarily out of stock

Reviews

Customers who bought this product also purchased

XT-60 connector (female) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock	Propeller MENZ-S 20x10 temporarily out of stock
Connectors banna oro 2 mm (M/F) temporarily out of stock	Propeller MENZ-S 22x8 temporarily out of stock	MPS Gas-Cap-Powerswitch temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
  Turbines->
    kerosene->
      Accesories
      Jet Central Turbines
      KingTech Turbine
      Oil
      PBS Turbines
      Smoke
      Spare parts JETCENTRAL
      Turbinas Jetsmunt
      XICOY Turbine
    Electric->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo KST BLS905X HV V2.0 8Kg 20mm
93.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Hardener Aero EPH 161 (500 g)
1 x	resin-hardener package L-385 with hardener H-385 (875 g)
1 x	White gelcoat 1 Kg
3 x	Hardener Aero EPH 161 (250 g)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	resin-hardener L-385 H-385 (1250 g)
1 x	resin-hardener L-385 H-385 (625 g)
2 x	resin-hardener package L-385 with hardener H-385
1 x	Hardener P-25, canister 2.5Kg
1 x	Epoxy Resin L (2.5 Kg)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	Epoxy Resin L + Hardener CL (60 min) kit/ 930 g
2 x	MEKP Harderner 100 g
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x	Allen wheel collar M4x6
2 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
2 x	28x5 mm wires output (2 pcs)
2 x	38x4,5 mm wires output (2 pcs)
1 x	100 mm rods + T patellas set for direction control
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Clip mini fixing for wing (2 pcs)
2 x	41x5,5 mm wires output (2 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	11 mm Rubber pads (14 pcs)
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	45 mm rods + T patellas set for direction control
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	250 mm / 16 mm Airbrakes
2 x	140 mm rods set for direction control
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	100 mm rods set for direction control
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Xplorer3 anemometro
2 x	Xplorer4 anemometro
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Profile ABS half cane 3x1000 mm
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Strip 3,5x1,75x330 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
2 x	Allen wheel collar M3x3
1 x	SE Ring 480 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
2 x	Lead with adhesive (2 pcs)
1 x	Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs)
1 x	Cable grommet 9.5 mm (4 uds)
1 x	Split pin 1x8 mm (10 uds)
2 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Clip fixing for wing (2 pcs)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Window mounting channel 5m
1 x	Steering arm 16 mm Ø 3 mm
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Foil for sticking flaps and ailerons
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	20x200 mm battery rings
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Steering arm 16 mm Ø 4 mm
2 x	Allen wheel collar M3x5
1 x	Landing gear frontal support 25x32x16
1 x	Allen wheel collar M4x4
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Pushrod octagone 4/3
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Propeller Pleg CAM Carbon 11x6
1 x	Propeller Pleg CAM Carbon 14x6
1 x	Propeller Pleg CAM Carbon 10x8

3,485.61EUR