Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Servo HITEC D89 MW
62.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

3 x	Sukhoi 29S 2,2 m V2 AMARILLO/NEGRO (SebART)
3 x	EDGE 540-A 91" (2310 mm)
2 x	Sukhoi 29S 2,6 m Amarillo/Negro (SebART)
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	EXTRA NG 85" 2159mm Yellow/Blue
2 x	EXTRA 330SC-E 95" Orange/Blue/White
3 x	BOOMERANG II 40/46 ARF 1.55mm
2 x	PARAGON Trainer 46-55 1580 mm
2 x	TRAINER RC Pilot V2 90" w/r ARF
2 x	BULLIT 60 Ala 1095 mm
2 x	SkyMaxx 1.550 mm (kit)
1 x	PC-6 Pilatus Porter Big "Tiger" (PICHLER)
1 x	Paracaidas BACKUP X100
1 x	EXTRA 330L 35% pack hardware (Precision Aerobatics)
1 x	Tubo carton cohete 50mm x 48mm x 250mm
1 x	DOMINO 46-55 Trainer 1583 mm
2 x	EXTRA NG 85" 2159mm rojo/blanco
1 x	PC-6 Pilatus Porter Big "Fredi" (PICHLER)
1 x	Salida para cables 28x5 mm (2 pcs)
1 x	Piloto JAN 1/4 Veleros
1 x	Liston ABS 1,0x2,0x1000 mm
1 x	Soporte ventral para AX-18/AX-60
1 x	Liston ABS I 2,5x1,25x330 mm
1 x	Anemometro Xplorer2
1 x	TWIST planeador gomas
2 x	Piloto 1/12 "Tom"
1 x	Piloto civil "Joe" tamaño 9cm (Slimline)
1 x	Varilla acero Ø 7,0 mm x 1000 mm
2 x	Listón triangular de BALSA 6x6x1000 mm
1 x	Varilla ABS 4,0x1000 mm
1 x	Conjunto bieleta 90 mm y rótulas T. para dirección
1 x	Film perforado 100 cm / 20 m
1 x	Conjunto bieleta 45 mm y rótulas T. para dirección
1 x	Listón triangular de BALSA 8x8x1000 mm
1 x	Pasacable de goma Ø 3.2 mm (4 uds)
1 x	Prisionero aluminio 5 mm Ø (4 uds)
1 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Cargas cohete B4-0 (6 pcs)
2 x	Piloto 1/12 "Langley"
2 x	Piloto 1/12 "Cougar"
1 x	Varilla acero Ø 5,5 mm x 1000 mm
1 x	Set de Humo "S"
1 x	Cartucho de humo Azul 140 g
1 x	Manta bolsa de vacio 300 gr/m2 Bobina 1m
1 x	Cartuchos de humo AX-3 blanco (10 pcs)
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Liston ABS 2.0x8.0x1000 mm
1 x	Actuador lineal HLS12-100210-7.4v
2 x	Conector universal carga chispometro
1 x	Soporte tubo Ø 6mm (10 pcs)
1 x	Fibra carbono tela No-cruzada ST 100g/m2 50 cm x 10 m
1 x	Varilla acero Ø 0,5 mm x 1000 mm
1 x	Plancha carbono 350x150x1.0 mm
1 x	Liston ABS 1,5x4,0x1000 mm
1 x	Portaequipajes BIG-MALIBU XL 285x90x44 cm Gris
1 x	Prisionero allen M3x5
2 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Soporte para aviones
1 x	Sensor RPM Optico para Dinamometro
1 x	Piloto civil "G-Man" tamaño 9cm (Slimline)
1 x	Cierre cabina V1 M3 Rojo (2 pcs)
1 x	Conjunto bieleta 100 mm y rótulas T. para dirección
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Taco goma 11 mm (14 pcs)
1 x	Biberon 500 ccm Glow
2 x	Cierre cabina V1 M3 Azul (2 pcs)
1 x	Prisionero allen M3x3
1 x	Fibra carbono tela 245g/m2 127 cm x 10m
1 x	Varilla ABS 6,0x1000 mm
1 x	Cartucho de humo Blanco 65 g
1 x	Bayoneta aluminio/strongal D12 mm/0,5 m
1 x	Soporte filtro FESTO (4 pcs)
1 x	Plancha aluminio 500x250x0.5 mm
2 x	Piloto jet 130 mm
1 x	Cartucho de humo Rojo 100 g
2 x	Chispometro glow 1.3 Ah
2 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
1 x	Piloto militar "Kamikaze" tamaño 9cm (Slimline)
2 x	Film perforado 145 cm / 50 m
1 x	Varilla ABS 1,25x1000 mm
1 x	Piloto civil "Pamela" tamaño 9cm (Slimline)
1 x	Set de Humo "Planeador"
1 x	Piloto 1/12 "Fighter"
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 100 m
1 x	Soporte Angular conector XT-60 (2 pcs)
2 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Bird (Aero-naut)
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Liston ABS 1,0x5,0x1000 mm
1 x	PCARD sistema wireless
1 x	ARAMID panel nido de abeja 1300x2600x2 mm
1 x	Liston ABS 1,5x8,0x1000 mm
1 x	Listón de BALSA 5,0x5,0x1000 mm
1 x	Paracaidista
1 x	Piloto 1/10 "Jack"
1 x	Soporte bomba/flitro Xicoy X45
1 x	Soporte bomba Xicoy X45
1 x	Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x	Mini Clips para fijar Ala (2 pcs)
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 5 m
1 x	AIREX® M060 lámina (amarilla) 1200x550x4,0 mm (5 pcs)
1 x	Acumulador polvo para limpieza moldes
1 x	Tornillo M3x0,5x20 mm Cabeza Plana alum. anodizado azul (4 pcs)
1 x	Bateria LRP 2200-7.2v 6 cell NiMH
1 x	Varilla carbono 16 mm x 1000 mm
1 x	Varilla carbono plana 3.0 x 1.0 x 1000 mm
1 x	Acoplador "Z" Ø 2 (2 uds)
1 x	Arandela conica alumino M3 negro (8 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Botón alum. anodizado azul oscuro(4
1 x	Perfil de ABS cuadrado 4 x 1000 mm
1 x	Acople ALU M2,5 Ø 6 (2 uds)
1 x	Perfil de ABS "T" 2.0x2.0x1000 mm
1 x	Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x	Cinta autoadhesiva 13 mm x 16.80m; Diente 0.5 mm
1 x	Perfil de ABS triangular 4.0x1000 mm 90º
1 x	Perfil de ABS de media caña 8,0x1000 mm
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	Varilla carbono 2.5 mmx1000 mm
1 x	Hélice POWER-PROP 7x7
1 x	SHOCK CUB 102" 2.600 mm 38-50cc YELLOW (Seagull Models)
1 x	ULTRA STICK 10 cc ARF
1 x	CARBON CUB 15cc ARF 2280 mm
1 x	Bayoneta: Fibra de vidrio/Carbono (13.7/12.5) x 1000 mm
1 x	Cable pull pull SUS 3m + cierres
1 x	Brazo direccional 16 mm Ø 3 mm ( 2 uds)
1 x	Sukhoi 29S 2,2 m V2 CLASSIC BLUE (SebART)
1 x	Gorra Jeti Negra
1 x	Piloto 1/4 "Mike"
1 x	Plancha carbono 550x350x1.5 mm ECOTECH
1 x	Plancha contrachapado "Economy" 600x300x6,0 mm
1 x	Cinta Roving carbono 20m
1 x	Film perforado 100 cm / 50 m
1 x	Plancha contrachapado Abedul 600x300x2,0 mm
1 x	Varilla acero Ø 3,0 mm x 1000 mm
1 x	Plancha contrachapado Abedul 600x300x3,0 mm
1 x	Tornillo allen M3x30 (10 pcs)
1 x	Tornillo allen M2x3 mm (4 pcs)
1 x	Tornillo M2x8 PH
1 x	Tornillo M2x6 (10 pcs)
1 x	Motor Brushless QUANTUM II 55
1 x	Eje para motores AXI 2808/xx
1 x	Motor A50-16 S V4
1 x	Motor A20-20 L EVO
1 x	Motor A60-5XS V4 28-pole kv420
1 x	Eje para motores AXI 5330/xx
1 x	Bayoneta: Fibra de vidrio/Carbono (26.5/25 x 25/23) x 1000 mm
1 x	Aero frenos eléctricos para veleros 250 mm (2 pcs)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	Anclaje varilla mando Ø 1.5 mm prisionero/arandela (2 uds)
1 x	Cable acero trenzado Ø 1,3 mm (10 m)
1 x	EXTRA 300 78" V3 Yellow/Red/Blue
1 x	Eje ruedas Ø 8 mm (2 uds)
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Piloto 1/6 "Cindy"
1 x	Plancha contrachapado HAYA 600 x 300 x 2,0 mm
1 x	Fibra vidrio trenzada "manga" 45 mm x 10m
1 x	Plancha carbono 500x400x2.0 mm ISOTECH
1 x	Plancha de balsa 4,0x100x1000 mm
1 x	Malla PVC cuadrada 290x185x0,32 mm
1 x	Fibra de vidrio 163 g/m² 1 m x 10 m (Aero, finish FK 144, plain)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Soporte conector MPX (6 pcs)
1 x	Manta bolsa de vacio 150 gr/m2 Bobina 20m
1 x	Soporte conector XT-60 (2 pcs)
1 x	Plancha de balsa 1,0x100x1000 mm
1 x	Fibra vidrio 160 g/m2 "twill weave" (50 m x 1 m)
1 x	Borde Salida BALSA 35x8x1000 mm
1 x	Plancha contrachapado Abedul 600x300x2,0 mm
1 x	Masilla fina fina blanca, 1 kg Colormatic 2K
1 x	Tornillo Servos M2x9/16 (4 pcs)
1 x	Tornillo allen M2x12
1 x	Tornillo M2.2x13 (10 pcs) Especial cabinas, tapas servos
1 x	Piloto 1/6 "Garry"
1 x	Tornillos 2,2 x 6,5 mm (20 pcs)
1 x	Pasador Ø 1 x 6 mm (10 pcs)
1 x	Piloto 1/4 "Heidi"
1 x	Piloto 1/7 "Japonés"
1 x	Tornillo M3x0,5x8 mm Cabeza Plana Titanio (4 pcs)
1 x	Tornillo allen M3x5 (10 pcs)
1 x	Depósito de gasolina de 280 cc completo
1 x	Prolongador servo 20 cm HITEC/JR
1 x	Tuerca para insertar hexagonal M4 Br (4 pcs)
1 x	Tuerca hexagonal M2.5 (10 pcs)
1 x	Arandela 2.7 mm (20 pcs)
1 x	Tuerca hexagonal M4 (10 pcs)
1 x	Filtro aire MOKI
1 x	Motor MOKI 160 BVT boxer 4-stroke
1 x	Bateria LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	Bateria LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	DUPLEX 2.4EX RC Switch
1 x	A60-6XS V4 28-Pole
2 x	Conector banana oro 8,0 mm 5 pcs (hembra)
1 x	Motor Saito FG-36, 36 cc
1 x	Cilindro DLE 20-RA
1 x	Motor DA 70 Boxer
1 x	Juntas DLE-30
1 x	Tubo teflon Dia. 16x35 mm para escape
1 x	Cilindro DA-85/170 (1 pcs)
1 x	Canister combo DLE 120cc
1 x	Piñon motor autostarter 35cc
1 x	Soporte trasero 35 mm para motor gasolina
1 x	Soporte aluminio ZG23SL/H/M, ZG26SC/SCM, ZG231SLH
1 x	Tornillo largo M5 ZG45/62/74/80
1 x	Autoarranque DLE55, EME55/60, DLA56, SE 55
1 x	Capuchón BOSCH para bujía ZG 26SC/SCM, 231SLH, G230RC
1 x	Soporte escape ø 55 mm
1 x	Separador carburador ZG38/S/SC
1 x	Encendido CDI EME 55/60 cc
1 x	Junta cilindro para ZG-20
1 x	Codo escape ZG20/ZG22/ZG23/ZG26
1 x	Junta escape DA-50R/100/200
1 x	Rodamiento medio DA-120
1 x	Juego juntas carburador ZG74/80B, DA85/100/100L/120/200, VM170/2
1 x	Membrana carburador para motor ZG 20/22/23/26/31
1 x	Soporte trasero 30 mm para motor gasolina
1 x	Soporte trasero 20 mm para motor gasolina
1 x	Tornillo M2.5x10 (10 pcs)
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Tuerca hexagonal M2 (10 pcs)
1 x	Varilla empujador MOKI S250 (1 pcs)
1 x	Motor Moki 100 BVT
1 x	Cable adapter iCharger
1 x	Destornillador Torx® TX6
1 x	Destornillador Allen 1.5 mm
1 x	Bancada Aluminio set radial motor A60-V2
1 x	Disipador para motor Hacker B 20 (o motores hasta Ø20 mm)
1 x	Bancada motor HACKER A60 aluminio
1 x	Motor DA 120
1 x	Motor OS 40-FG 4T
1 x	Carburador DLE 170
1 x	Motor DA 150
1 x	Junta culata MVVS 30 cc (3 pcs)
1 x	Junta cilindro / aislante para ZG 38 / S / SC
1 x	Corona autoarranque EME
1 x	Tubo teflon Dia. 25x5 mm para escape
1 x	Canister combo DLE 120cc
1 x	Codo carburador aluminio ZG 45 SL
1 x	Carburador ZG45SL Y ZG62/S/SL
1 x	Codo carburador plano ZG-62
1 x	Encendido para ZG 20/26
1 x	Cilindro para DA-60 y DA-120
1 x	Motor EME 70 cc con autoarranque
1 x	Junta cárter para DA-60 / DA-120
1 x	Admision roja DA-150L/170
1 x	Tubo escape flexible acero inox. Dia.16 mm x 30 cm
1 x	Codo escape angulo 90º - Ø 25 mm
1 x	Perforador helice MOKI S150/S180/S215/S250
1 x	Deflector madera MOKI S250/330 mm

44,053.45EUR