Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

3 x	Chaqueta Hispano Aviación
1 x	Aero frenos eléctricos para veleros 440 mm (2 pcs)
3 x	Cabina Sweet / Siesta
1 x	DINO Glider ARC
3 x	Gracia Maxi ARF, alas (Top Model)
1 x	Eje barco de 261 mm M4/M4 6.0x4.0 mm
1 x	Hélice RABOESCH M4 30 mm (3 Palas) (Hélice izquierda)
1 x	Eje barco 290 mm M5
1 x	Cardan nylon negro (sin piñones)
1 x	Eje barco de 290x4 mm M4
1 x	Canal de ABS de 3,0x6,0x1000 mm
1 x	Hélice RABOESCH M4 45 mm (3 Palas pr) (Hélice derecha)
1 x	Canal de ABS de 8,0x4,0x1000 mm
1 x	Eje barco de 290 mm M4/M4 6.0x4.0 mm
1 x	Acoplador laton Ø 4.0 / 3.2 mm L: 25 mm
1 x	Hélice RABOESCH M4 40 mm (3 Palas) (Hélice derecha)
1 x	Hélice RABOESCH M3 50 mm (3 Palas pr) (Hélice derecha)
2 x	Piñón eje 5 mm
1 x	Bujía NGK CM6
1 x	Astra (Top Model)
1 x	Bayoneta aluminio ø35×1.5 mm x 1m
1 x	Bidule 111 3000 mm
1 x	Cable servo PVC 0,14 mm2 Hitec/Mpx (5 m)
1 x	Albatros, cabina (Top Model)
1 x	Bayoneta aluminio ø35×1.5 mm x 500mm
1 x	Cable "Y" equilibrador 6S, 2x JST-XH / 1x JST-EH
1 x	CC 03
1 x	BEC Mini JETI
1 x	Cable USB para programación HLS
1 x	CC 01
1 x	Circlick seguridad
1 x	Adaptador TP/TopFuel - XH 2/3S
1 x	Adaptador 3 LiPos XH>EH
1 x	Cable carga emisora GRAUPNER
1 x	CC 05
2 x	Varilla acero Ø 8,0 mm x 1000 mm
1 x	Varilla latón hexagonal Ø 5 mm x 1000 mm
1 x	Alambre de cobre esmaltado en rojo Ø0,2 mm (5 m)
1 x	Planeador KNIRPS
1 x	Fox MDM-1 ARF 3.5m Orange
1 x	Varilla carbono plana 1000 x 5.0 x 1.0 mm
1 x	Varilla carbono plana 1000x6.0x0.8 mm
1 x	Interruptor canal todo/nada 3 posiciones Largo FX
1 x	Receptor FUTABA R617 FS 2,4 GHz
1 x	Varilla carbono 7.0 mmx1000 mm
1 x	Cable silicona 0,25 mm² negro (25 m)
1 x	Cable PVC 2 x 0.25 mm2 (5 m) rojo-negro
1 x	Varilla acero Ø 0,8 mm x 1000 mm
1 x	Varilla acero roscada M2 - 1m
1 x	Cable "Y" equilibrador 7S, 2x JST-XH / 1x JST-EH
1 x	Varilla latón hexagonal Ø 4 mm x 1000 mm
1 x	APM2,6 Power module con BEC 5,3 V DC
2 x	Varilla Aluminio Ø 4,0 mm x 3000 mm
1 x	Varilla acero roscada M3 -1m
1 x	Varilla acero Ø 14,0 mm x 1000 mm
1 x	Alambre cobre esmaltado 3 hilos trenzados rojo/negro/cobre Ø0,2
2 x	Varilla acero Ø 5,0 mm x 1000 mm
1 x	Varilla latón Ø 0,5 mm x 1000 mm
1 x	Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x	Cable BEC 30 cm (hembra)
2 x	Cable carga XT90
1 x	Bujía Saito 400
1 x	BEC 3A FOXY
1 x	Cable carga bateria transmisor Graupner 2x0,5 qmm (50 cm)
1 x	Alambre de cobre esmaltado Ø0,2 mm (5 m)
1 x	Adaptador TP/TopFuel - JST-EH 4/5S
1 x	Adaptador USB para elementos Jeti DUPLEX
1 x	Adaptador Dean "T" - Futaba
1 x	Adaptador JST-XH
1 x	Adaptador 5 LiPos XH>EH
1 x	Varilla acero Ø 3,0 mm x 1000 mm
2 x	Adaptador MPX-Dean "T"
2 x	Varilla latón Ø 1,0 mm x 1000 mm
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Varilla latón Ø 0,8 mm x 1000 mm
1 x	Cable Futaba voltaje externo para telemetria
2 x	Alambre de cobre esmaltado en negro Ø0,2 mm (5 m)
1 x	Cable BEC 30 cm (macho)
1 x	Varilla acero Ø 6,0 mm x 1000 mm
2 x	Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x	Varilla acero Ø 1,5 mm x 1000 mm
2 x	Adaptador 2 LiPos XH>EH
1 x	Cable de entrenamiento para GWS T4A II (maestro-alumno)
1 x	Varilla acero Ø 5,5 mm x 1000 mm
1 x	Adaptador (GP/KO hasta 4S) para CellPRO 4S
1 x	CC 02
1 x	Varilla acero Ø 2,5 mm x 1000 mm
1 x	Varilla acero Ø 1,5 mm x 1500 mm
1 x	Adaptador 4 LiPos XH>EH
2 x	Varilla latón hexagonal Ø 3 mm x 1000 mm
2 x	Varilla acero Ø 0,5 mm x 1000 mm
2 x	Varilla acero Ø 7,0 mm x 1000 mm
1 x	Varilla acero Ø 1,2 mm x 1500 mm
1 x	Receptor Futaba R2008SB de 8-canales 2,4 GHz FHSS
1 x	Cable profesor-alumno T12FG/FX-30
1 x	Varilla carbono 12 mm x 1000 mm
1 x	Gracia (Top Model)
1 x	CYCLONE XT 6.2m ARF
1 x	Grafas ARF 3.0 m (Top Model)
1 x	Velero Mü13e (Bergfalke)
1 x	Gracia Maxi ARF, fundas (Top Model)
1 x	Interruptor canal todo-nada 3 posiciones
1 x	BABY planeador, planos (Aero-naut)
1 x	Varilla carbono 1.5 mm x 1000 mm
2 x	Varilla carbono 2.0 mmx1000 mm
1 x	Varilla carbono 0.8 mmx1000 mm
1 x	Bayoneta de carbono cuadrada 5x5x220 mm
1 x	BABY planeador (Aero-naut)
1 x	Rueda ligera 45x18,5x2 mm (2 uds)
1 x	Varilla carbono 1.5 mm x 2000 mm
1 x	Servo Robbe FS 525 BB MG HV
1 x	Cable servos silicona 0,14 mm2 Graupner (100 m)
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Ferrita 14x8x5.5 mm
1 x	Cable servo PREMIUM 200m (blanco/rojo/azul)
1 x	Cable silicona 0,25 mm2 blanco (100 m)
1 x	Cable servos PVC 0,08 mm2 Futaba (5 m)
1 x	Cable servos silicona 0,35 mm2 Futaba (5 m)
1 x	Cable servos silicona 0,50 mm2 Graupner (5 m)
1 x	Cable servos silicona 0,14 mm2 Graupner (5 m)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	VAGABOND 1500 mm ARF V2 (Azul)
1 x	Rodamiento eje bronce Ø 5 x Ø 8 x 8 mm
1 x	Varilla ABS 1,5x1000 mm
1 x	Controladora de motor individual SyRen 50A 6V-30V
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Mini VISION "spread tow" CFK
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	Sukhoi 29S 2,6 m Blanco/Azul (SebART)
1 x	Swift ARF 2000 mm Rojo (Hacker Model)
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	Motor XPower XC 5030/14 LS
1 x	TAKEO 3.6m electric
1 x	ANGEL 48" pp orange/black/white
1 x	AXI 2826/8 V2
1 x	AXI 2820/10 V2
1 x	AXI 2826/6 V2 Eje largo
1 x	AXI 2820/12 V2 Eje largo
1 x	AXI 2814/12 V2 Eje largo
1 x	LASER 260 60" V2 ARF Rojo (SkyWing)
1 x	AXI 2820/10 V2 Eje largo
1 x	EXTRA NG 85" 2159mm Yellow/Blue
1 x	Tubo ABS 6,0x5,0x1000 mm
1 x	Tubo ABS 7,0x5,0x1000 mm
1 x	Tubo ABS 3,0x2,0x1000 mm
1 x	Tubo ABS 6,0x4,0x1000 mm
1 x	Tubo ABS 9,0x7,0x1000 mm
1 x	Timón 36x60 mm
1 x	Timón 30x49 mm
1 x	Varilla ABS 6,0x1000 mm
1 x	Colador protector turbina 67 x 32 mm
1 x	Polo Hispano Aviación
1 x	Turbina KingTech K30G Restart
1 x	Bancada trasera motor gasolina 38 mm
1 x	Núcleo del rotor
1 x	Elevador Cierva C30
1 x	Aditivo antiestatico JETCAT 120 ml
1 x	Bomba Humo Variable
1 x	Pipa Jet ULTIMATUM 2m
1 x	Turbina KINGTECH K320 G5
1 x	Colador protector turbina 83 x 32 mm
1 x	Tubo humo turbina acero
1 x	Aceite turbina KINGTECH 1L
1 x	Aceite turbina KINGTECH 5L
1 x	Varilla latón Ø 1,5 mm x 1000 mm
1 x	Bateria LiFe 3000 mAh 3s 25C
1 x	Head spacer
1 x	Parte inferior del rotor Nueva
1 x	Housing-lower del cíclico LA500
1 x	Bahía de la batería
1 x	Parte inferior del rotor
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Motor brushless 1806 - 2300 Kv Cuadricóptero
1 x	Hub corona pre-rotación LA500
1 x	Palas LA500
1 x	Carena delantera LA500
1 x	Varilla carbono 1.5 mm x 1000 mm
1 x	Conector doble con soporte JR con prolongación 200 mm
1 x	Conector AWG Macho 6 pines
1 x	UBEC 6A KAVAN
1 x	Adaptador MPX-EC3 10cm
1 x	Conector alas EWC3 40 cm
1 x	Conector CAN 15
1 x	FOX MDM-1 3.500 mm ARF White
1 x	DPSI Ampere battery backer
1 x	Varilla acero Ø 4,0 mm x 1000 mm
1 x	Varilla acero Ø 2,0 mm x 1000 mm
1 x	Varilla carbono 2.5 mmx1000 mm

26,828.64EUR