1 x | CC 05 |
1 x | CC 02 |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Connector Sub-D 2+5 Female |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Connector Sub-D 2+5 Male |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | CC 03 |
1 x | Cabel charger transmitter GRAUPNER |
2 x | Double conector with JR adapter and 200 mm extension |
1 x | DPS Switch JR/JR |
2 x | CM-3 |
1 x | Dean "T" - Futaba Adapter |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | 30 cm BEC cable (female) |
1 x | 30 cm BEC cable (male) |
1 x | 2 LiPo XH>EH adapter |
1 x | UBEC 6A KAVAN |
2 x | Connector CAN 15 |
1 x | Cabling for Fox MDM1 wings |
1 x | APM2.6 Power module with 5.3V DC BEC |
2 x | Aluminium wide washer M3 gold (4 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
2 x | M3 black washers (4 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
2 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
2 x | Flat washer 3.2 mm (20 pcs) |
2 x | Lock washer 4.3 mm (20 pcs) |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Quicklock washer 3 mm (10 pcs) |
2 x | Lock washer 2.2 mm (20 pcs) |
2 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
3 x | Lock washer 2.7 mm (20 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | White smoke canister 100 g |
1 x | Red smoke bombs AX-60 (5 pcs) |
3 x | Blue smoke canister 100 g |
2 x | White smoke bombs AX-60 (5 pcs) |
1 x | Remote electric ignition system |
1 x | Smoke set "S" |
3 x | AX-60 starters (5 pcs) |
2 x | Parachute expulsion foam |
2 x | Smoke set "M" |
3 x | Black smoke bombs AX-60 (5 pcs) |
3 x | Green smoke canister 100 g |
1 x | Ventral support for AX-18/AX-60 |
2 x | "S" set for boats |
1 x | Yellow smoke canister 65 g |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | PWC4 wing/fuselage connector for 4 servos |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
2 x | Straightened rod Ø 1.5 mm x 1500 mm |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Male connector for 6 pines AWG |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
3 x | Liston HAYA 3 x 10 x 1000 mm |
2 x | Pine wood slat 3.0x10.0x1000 mm |
2 x | BALSA triangular 6x6x1000 mm |
2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | EWC6 40 cm wing connector |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
2 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | DPSI Ampere battery backer |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Covered closure or fairings |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Electric spoiler 250 mm (2 pcs) |
3 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Motor DLE 200cc Premium Muffler |
2 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Big Crow DLE-170M |
1 x | Motor DLE 170 M- Paramotors |
1 x | Small Crow DLE-170M |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | BEC 3A FOXY |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | 15 mm reinforced hinge |
1 x | 4 LiPo XH>EH adapter |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
2 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | Threaded insert M4 (4 pcs) |
1 x | Nut for mounting M5 (4 pcs) |
2 x | Blind nut M5 (4 pcs) |
1 x | Screw M3x5 (10 pcs) |
1 x | Screw M2.5x20 (10 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Tapping Screw M2.2x13 (10 pcs) |
2 x | Hexagonal Nut M2.5 (10 pcs) |
2 x | AX-60 starters (5 pcs) |
2 x | Initior Receiver FRX2 Wireless |
2 x | Red smoke canister 140 g |
1 x | White smoke canister 65 g |
2 x | B4-0 rocket charges (6 pcs) |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
2 x | "M" set |
1 x | "S" set for planes |
2 x | Smoke set "Glider" |
2 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | White smoke canister 140 g |
2 x | Plastic caps for AIR BURTS (30 pcs) |
2 x | Red smoke canister 65 g |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | EWC3 40 cm wing connector |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
3 x | Straightened rod Ø 7.0 mm x 1000 mm |
2 x | Linden wood slat 2.0x2.0x1000 mm |
2 x | Beech dowels 4.0 x 1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | Crystal TX 35.150 Ch 75 |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Blue smoke canister 140 g |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
2 x | M3-M4 rubber washer (8 pcs) |
1 x | Straightened threaded rod M3 - 1m |
2 x | Balsa panel 6.0x100x1000 mm |
2 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | BALSA triangular 10x10x1000 mm |
2 x | Balsa panel 1.0x100x1000 mm |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Tailwheel for 40/90 size |
1 x | 28 mm tailwheel unit |
1 x | Tip wing protector 30x10 (2 pcs) |
2 x | Screw-lock connector M2 (2 uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
1 x | One touch canopy lock |
2 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Metal ring front FEMA |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | MAX BEC |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Snap long M2 (10 uds) |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Green smoke canister 65 g |
2 x | Servo M2x7/16 screw (4 pcs) |
3 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Lock nut M5 (10 pcs) |
1 x | Lock nut M5 (20 pcs) |
1 x | Lock nut M6 (10 pcs) |
1 x | Lock nut aluminium M2.5 (4 pcs) |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | Lock nut M3 (10 pcs) |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | Lock nut M4 (10 pcs) |
1 x | Blind nut M8 (10 pcs) |
1 x | Lock nut M2 (10 pcs) |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | PCARD Wireless System |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Long Switch On/Off micro |
1 x | Spinner 42 mm EXTRA 330SC |
1 x | Red smoke canister 100 g |
1 x | White smoke bombs AX-3 (10 pcs) |
2 x | Birch plywood plate 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
2 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | FALCON 24X9 CARBON PROPELLER (GAS) |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Silent-blocks DLE 170M |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | Motor A10-7 L 4,4:1 |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | Motor A20-20 L EVO |
2 x | Birch plywood plate 600x300x3.0 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Micro Switch button |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Shaft for A60-L V4 |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | FALCON 33X11W CARBON PROPELLER (GAS) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Canopy Latch |
1 x | Set montaje amortiguador para modelos 8-16 Kg |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Nylon Screw M4x20 |
1 x | JP Hobby ER-120 Tricycle Full Set with Brakes (JSM Xcalibur Ripm |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Aluminum Fold Prop Spinner 50 mm / 6mm |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Motor A20-22 L EVO |
1 x | Motor A60-7XS V4 28-pole kv330 |
2 x | Micro Crystal RX 35.140 Ch 74 |
2 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | 12 mm floating pad (49 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Motor B20-10 L + 4:1 gearbox |
1 x | Crystal RX 35.050 Ch 65 |
1 x | Micro Crystal RX 35.890 Ch 189 |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
1 x | Katana 30, Decal set (Sebart) |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Crystal RX 35.250 Ch 285 |
1 x | Micro Crystal RX 35.090 Ch 69 |
1 x | Micro Crystal RX 35.170 Ch 77 |
1 x | Crystal RX 35.010 Ch 61 |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Crystal RX 35.030 Ch 63 |
1 x | 15 mm floating pad (30 pcs) |
1 x | Blind nut M2 (10 pcs) |
1 x | 10 mm floating pad (72 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | 3l Smoke oil |
1 x | Blind nut M3 (4 pcs) |
1 x | Blind nut M6 (4 pcs) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
1 x | Conector MR-60 (pareja) |
|
18,365.59EUR |