Top » Catalog » Hardware » Servos » Hitec » ROIHSB9380

152.90EUR

Servo HITEC HSB-9380TH
[ROIHSB9380]

Product Description
With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for helicopter pilots.

Features
Programmable 12 Bit Digital Circuit Using the DPC-10 PC interface (PN 44426) and downloadable software, users can program a variety of features in the HSB-9XXX Series including: Fail Safe On/Off and Position, direction, EPA, Speed (Slower), dead Band, and Soft Start.

Power Efficient Brushless Motor Controller
Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.

Custom NewMotor
Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.

Constant Torque Output:
Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.

Hybrid MPD 1st Gear: Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.

Industry-Leading Titanium Gear Train Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.

25-Tooth Standard Spline
Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.

Specifications:
- Motor Type: 3 Pole Ferrite
- Bearing Type: Triple Ball Bearing Support
- Speed (6.0 V/7.4 V): 0.18/0.14 second
- Torque oz/in (6.0V/7.4V): 472 oz-in
- Torque kg/cm (6.0V/7.4V): 34 kg-cm
- Size in Inches: 1.57x0.79x1.50 in
- Size in Millimeters: 40x20x38 mm
- Weight oz: 2.4 oz
- Weight g: 68 g

temporarily out of stock

Reviews

Customers who bought this product also purchased

XT-60 connector (male) temporarily out of stock	Silicon black 2,5 qmm cable ( 25 m) temporarily out of stock	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) temporarily out of stock
Silicone red 2,5 qmm wire ( 25 m) temporarily out of stock	XT-60 connector (female) temporarily out of stock	Silicone black 6,0 qmm wire (25 m) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Turbina XICOY X240 compact
3,385.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	CC 05
1 x	CC 02
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Connector Sub-D 2+5 Female
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Connector Sub-D 2+5 Male
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	CC 03
1 x	Cabel charger transmitter GRAUPNER
2 x	Double conector with JR adapter and 200 mm extension
1 x	DPS Switch JR/JR
2 x	CM-3
1 x	Dean "T" - Futaba Adapter
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	30 cm BEC cable (female)
1 x	30 cm BEC cable (male)
1 x	2 LiPo XH>EH adapter
1 x	UBEC 6A KAVAN
2 x	Connector CAN 15
1 x	Cabling for Fox MDM1 wings
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
2 x	M3 black washers (4 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
2 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
2 x	Flat washer 3.2 mm (20 pcs)
2 x	Lock washer 4.3 mm (20 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
2 x	Lock washer 2.2 mm (20 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
3 x	Lock washer 2.7 mm (20 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	White smoke bombs AX-18 (5 pcs)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	White smoke canister 100 g
1 x	Red smoke bombs AX-60 (5 pcs)
3 x	Blue smoke canister 100 g
2 x	White smoke bombs AX-60 (5 pcs)
1 x	Remote electric ignition system
1 x	Smoke set "S"
3 x	AX-60 starters (5 pcs)
2 x	Parachute expulsion foam
2 x	Smoke set "M"
2 x	Black smoke bombs AX-60 (5 pcs)
3 x	Green smoke canister 100 g
1 x	Ventral support for AX-18/AX-60
2 x	"S" set for boats
1 x	Yellow smoke canister 65 g
1 x	Brass rod Ø 1.0 mm x 1000 mm
2 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
2 x	Straightened rod Ø 1.5 mm x 1500 mm
2 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Male connector for 6 pines AWG
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
2 x	Liston HAYA 3 x 10 x 1000 mm
2 x	Pine wood slat 3.0x10.0x1000 mm
2 x	BALSA triangular 6x6x1000 mm
2 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	EWC6 40 cm wing connector
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
2 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	DPSI Ampere battery backer
1 x	Straightened rod Ø 1.2 mm x 1500 mm
2 x	Screw-lock connector Ø 2 mm (2 uds)
2 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Covered closure or fairings
2 x	Stainless steel cable Ø 0.62 mm (10 m)
2 x	Locking cable tie 3.2x142 (uds)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Electric spoiler 250 mm (2 pcs)
3 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Cierre cabina aluminio Ø4, I=10 mm
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm
2 x	Motor DLE 200cc Premium Muffler
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Big Crow DLE-170M
1 x	Motor DLE 170 M- Paramotors
1 x	Small Crow DLE-170M
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	BEC 3A FOXY
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	15 mm reinforced hinge
1 x	4 LiPo XH>EH adapter
1 x	Pan Head Screw M1,6x6 (10 pcs)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x	Hexagonal Nut M1,6 (10 pcs)
1 x	Nut for mounting M2,5 (4 pcs)
1 x	Threaded insert M4 (4 pcs)
1 x	Blind nut M4 (10 pcs)
1 x	Nut for mounting M5 (4 pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Screw M3x5 (10 pcs)
1 x	Screw M2.5x20 (10 pcs)
1 x	Screw M2.5x5 (10 pcs)
1 x	Tapping Screw M2.2x13 (10 pcs)
2 x	Hexagonal Nut M2.5 (10 pcs)
2 x	AX-60 starters (5 pcs)
2 x	Initior Receiver FRX2 Wireless
2 x	Red smoke canister 140 g
1 x	White smoke canister 65 g
2 x	B4-0 rocket charges (6 pcs)
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
2 x	"M" set
1 x	"S" set for planes
2 x	Smoke set "Glider"
2 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	White smoke canister 140 g
2 x	Plastic caps for AIR BURTS (30 pcs)
2 x	Red smoke canister 65 g
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	EWC3 40 cm wing connector
1 x	Beech dowels 10 mm x 1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
3 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Circlik for shaft 1.2 mm (10 pcs)
1 x	Crystal TX 35.150 Ch 75
1 x	Beech dowels 3.0 x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Blue smoke canister 140 g
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
2 x	M3-M4 rubber washer (8 pcs)
1 x	Straightened threaded rod M3 - 1m
2 x	Balsa panel 6.0x100x1000 mm
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	BALSA triangular 10x10x1000 mm
2 x	Balsa panel 1.0x100x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Tailwheel for 40/90 size
1 x	28 mm tailwheel unit
1 x	Tip wing protector 30x10 (2 pcs)
2 x	Screw-lock connector M2 (2 uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Fully Threaded Steel Rod M3
1 x	One touch canopy lock
2 x	Wing bolts M3 Steel screw blue (2 pcs)
1 x	Window mounting channel Type H 2.5x0.5 (2 m)
1 x	140 mm rods + T patellas set for direction control
1 x	Wheel collar 3.5 mm Ø (4 uds)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Split M1,2x10 (10 pcs)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Metal ring front FEMA
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	MAX BEC
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 6.0x4.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Triple rod con. 3mm Pushrod (2 pcs)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Fully Threaded Steel Rod M2,0 (2 uds) 250mm
1 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Snap long M2 (10 uds)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Crystal Universal RX 35.040 Ch 64
1 x	Crystal Universal RX 35.030 Ch 63
1 x	Crystal Universal RX 35.170 Ch 77
1 x	IPACS Aerofly Professional Expansion Pack Vol. 1 PC-DVD
1 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	Green smoke canister 65 g
1 x	Servo M2x7/16 screw (4 pcs)
2 x	Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Lock nut M5 (10 pcs)
1 x	Lock nut M5 (20 pcs)
1 x	Lock nut M6 (10 pcs)
1 x	Lock nut aluminium M2.5 (4 pcs)
1 x	Blue Aluminium lock nut M2 (4 pcs)
1 x	Lock nut M3 (10 pcs)
1 x	Hexagonal Nut M1 (10 pcs)
1 x	Lock nut M4 (10 pcs)
1 x	Blind nut M8 (10 pcs)
1 x	Lock nut M2 (10 pcs)
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	PCARD Wireless System
1 x	Balsa panel 4.0x100x1000 mm
1 x	Long Switch On/Off micro
1 x	Spinner 42 mm EXTRA 330SC
1 x	Red smoke canister 100 g
1 x	White smoke bombs AX-3 (10 pcs)
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
2 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	FEMA DEFLECTOR LEVER FOR WHEEL BRAKE,
1 x	FALCON 24X9 CARBON PROPELLER (GAS)
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
1 x	FALCON 28X10 CARBON PROPELLER (GAS)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	Silent-blocks DLE 170M
1 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x	White Fold Prop Spinner 38 mm / 5 mm shaft / 8 mm propellers
1 x	Motor A50-10L Turnado V3 Glider
1 x	Shaft for A60-XS-V2 (112,5mm)
1 x	Motor A10-7 L 4,4:1
1 x	Motor A40-10 L V2 14-Pole Glider
1 x	Motor A20-20 L EVO
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
1 x	Micro Switch button
1 x	Liston HAYA 8 x 8 x 1000 mm

15,325.91EUR