60.00EUR

Servo GO-12S70MG 20.5kg.cm 0.06s/60º
[KAV2012S70MG]


High torque/extra high speed programmable digital standard servo 69g with a coreless motor, hardened steel gears and wide input voltage range 4.8-8.4V, 2xBB; ideal for 1:8/1:10 on-road RC cars, etc. Torque 12.0kg.cm, speed 0.100s/60° at 4.8V, torque 15.0kg.cm, speed 0.082s/60° at 6.0V, torque 18.0kg.cm, speed 0.070s/60° at 7.4V, torque 20.5kg.cm, speed 0.060s/60° at 8.4V. An aluminium middle case heatsink for perfect cooling under high load. Dimensions 40x20x37.2mm, weight 69g.
High torque/extra high speed standard digital servo with a coreless motor and double BB-ed output shaft for general use in all kind of RC models - great for 1:10 on-road RC cars etc. A plastic case with middle aluminium heatsink for perfect cooling under high load.
GO-12S70MG is programmable using the KAVAN GO servo USB programmer/interface and PC software.
Programmable Functions
Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
Servo Neutral: Servo neutral (centre) position setting.
Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on. Reverse: Reverses the servo movement direction.
Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:
(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.
Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
Default: Restores the factory default setting of the connected servo.
Wide input voltage range 4.8-7.4 V (nominal).
25T/5.92 mm output shaft.
Servo dimensions Standard
Servo type Digital
Programmable Yes
Thrust at 4.8V [kg∙cm] 12
Thrust at 6.0V [kg∙cm] 15
Thrust at 7.4V [kg∙cm] 18
Thrust at 8.4V [kg∙cm] 20.5
Speed at 4.8V [s/60st.] 0.1
Speed at 6.0V [s/60st.] 0.082
Speed at 7.4V [s/60st.] 0.07
Speed at 8.4V [s/60st.] 0.06
Servo gears Metal
Ball bearings 2×
High-voltage Yes
Power supply [V] 4.8 - 8.4
Length [mm] 40
Width [mm] 20
Height [mm] 37.2
Weight [g] 69
Intended for Aeroplanes,Helicopters,On-road cars
Water resistance No


temporalmente fuera de stock
temporalmente fuera de stock

Comentarios
Categorías
* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
  3D IMPRESION
  Actuadores
  Adaptadores->
  Altimetros->
  Amperímetros
  Anemómetros
  Auto-Pilot
  Banco pruebas
  Baterías->
  Bayonetas
  BEC/Cables/Conector/
Interrup

  Bisagras
  Cables
  Cajas de vuelo
  Camaras->
  Cargadores->
  Catalogos
  Catapultas/Bungees
  Centralitas/Registro de Datos->
  Cintas/Cierres/Bridas
  Combustible->
  Conectores
  Conos/Muletas->
  Emisoras/ Radios/Receptores->
  Extintores
  Extractores piñones
  Ferritas
  Fibra/Carbono/Planchas/Malla/ABS
  Fundas
  Gafas
  Hardware
  Helices->
  Herramientas
  Horns mando
  Humo/Cohetería/Pirotecnia
  Instrumentos/ Paneles
  Linkages/Clevis
  Luces/Iluminacion->
  Maderas/ Listones
  Merchandising
  Pegamentos/Resinas/Epoxy->
  Pegatinas
  Perfiles
  Pilotos
  Prolongadores
  Recubrimientos/Termorretráctil
  Reguladores / Variadores->
  Remolque
  Rótulas
  Ruedas/Ejes->
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    Mikado
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronicos
  Simuladores
  Soportes/CG/Incidenc.
  Sprays/Pinturas/Barnices/Pastas
  Tornilleria
  Trenes de aterrizaje->
  Tubo Carbono/Latón/Acero/Alu
  Varilla Acero/Latón/Alum
  Varilla carbono
  Varillas-Listones ABS
Coches / Trucks->
Motores y Turbinas->
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
2 x Chaqueta Hispano Aviación
2 x Chaleco Hispano Aviación
1 x BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x Fox 4000 mm (Airwold)
1 x Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x Fox MDM 1 4000 mm DeLuxe,Panel instrumentos Fox MDM 4m
1 x ASW 15 5000 mm (Airwold)
1 x Fox MDM 1 4000 mm DeLuxe,bayoneta
1 x BLANIK 50 V2 Silver/Orange (SebArt)
1 x Planeador LS-8 GFK 6m
1 x Funda Alas JEEMO
1 x Oracover Blanco 10 m
1 x Cartucho de humo Blanco 100 g
1 x Extension silicona 30 cm macho (Graupner)
1 x SIMtransmitter 6 Modo 2
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Prolongador JR/Graupner hembra 40 cm de silicona
1 x Ojos de buey 10 mm (10 pcs)
1 x Soporte mástil 12 mm
2 x Dogdrive props 12 mm
1 x Helice Race 40 mm 1/4"(hélice derecha)
1 x Eje barco 290 mm M5
2 x Hélice 2 palas 31mm (hélice derecha)
2 x Soporte mastil 10 mm
1 x Hélice 2 palas 42mm (hélice derecha)
1 x Iniciador FRX2 Wireless Receptor
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Rótula M3
1 x Cable simulador USB multiplayer
1 x Acoplador M2 (10 uds)
1 x Círculo autoadhesivo 12 mm (49 pcs)
1 x Conector JR Servo hembra (10 pcs)
1 x Prolongador silicona 10 cm (Futaba)
1 x Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x Perfil Acero Inox. 10.5x5.7x1000 mm
1 x Instrumentos individuales 1/4 Planeador
1 x Prolongador 7.5 cm
1 x Perfil de ABS "T" 8.0x8.0x1000 mm
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Extension silicona 30 cm macho (Futaba)
1 x Perfil de ABS "T" 2.0x2.0x1000 mm
1 x Listón de HAYA redondo 4,0 x 1000 mm
1 x Varilla carbono plana 10.0 x 1.0 x 1000 mm
1 x Kwik link AL M3 con Clip (2 pcs)
2 x Rótula MAXI sin bola M3 (2 uds)
1 x Oracover Naranja 2 m
1 x Tuerca autoempotrable M5 (4 pcs)
1 x Gafas Innovation Plus
1 x Cartuchos de humo AX-60 amarillo (5 pcs)
1 x Ply-Span 450x600/13g Azul
1 x Prolongador silicona 10 cm (Graupner)
1 x Conector JR Servo macho (50 pcs)
1 x Conector JR/Uni Servo hembra BLUE silicon (10 pcs)
1 x Círculo autoadhesivo 15 mm (30 pcs)
1 x Varilla carbono 2.0 mmx1000 mm
1 x Cable carga bateria transmisor Multiplex 2x0,5 qmm (50 cm)
1 x Soporte ventral para AX-18/AX-60
1 x Ply-Span 450x600/13g Blanco
1 x Acoplador M2,5 Ø 2 mm (10 pcs)
1 x Cable BEC 30 cm (hembra)
1 x Arandela conica ancha alumino M4 Oro (4 pcs)
1 x Perfil de ABS cuadrado 1 x 1000 mm
1 x Listón triangular de BALSA 6x6x1000 mm
1 x Ball link latón BS M3 V1 (10 pcs)
1 x Prolongador silicona 35 cm (Futaba)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Acople ALU M3 Ø 6 (2 uds)
1 x Acoplador M2,5 Ø 3 mm (10 pcs)
1 x Ball link ALU M2,5/2 con rodamiento (1 pcs)
1 x Cartuchos de humo AX-18 blanco (5 pcs)
2 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Liston ABS 1,5x3,0x1000 mm
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Lima fina PERMAGRIT para Dremel
1 x Tornillo M3x0,5x20 mm Sokect Head aluminio anodizado lila (4 pcs
1 x Liston ABS 1,5x6,0x1000 mm
1 x Conector ABS "T" 4.0 mm x 1000 mm
1 x Conector XT-150 6mm (Set: 5 pares)
1 x Monokote AZUL metalizado (1.8x0.65m)
1 x Kit de montaje "S" para barco
1 x Copiador 2 unidades de 20 cm
1 x Rótula V3 aluminio M2,5 / 5 Diam con base corta (2 pcs)
1 x Cartucho de humo Verde 100 g
1 x Acople ALU M2 Ø 4 (2 uds)
1 x Hélice 2 palas 29mm (hélice izquierda)
1 x Medidor digital de peso, equilibrio y angulos BASIC
1 x Tren retractil MINI neumático 3 mm tripata (Het-rc)
1 x Hélice 2 palas 36mm (hélice derecha)
1 x Tapon 22 mm con espiga (Electron)
1 x Cono Aluminio hélice fija 30 mm diámetro / eje 3,2 mm
1 x Programador RS-200
1 x Rueda 130 mm con electrofreno + E-Brake(2 uds)
1 x Dogdrive props 10 mm
1 x Conector banana oro 2 mm
1 x Tren delantero 155 mm con rueda 70 mm
1 x Tren carbono de 160 mm (2pcs)
1 x Tren delantero 131 mm con amortiguación
1 x Actuador electrico 25 mm
1 x Cono NUT M10x1
1 x PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x Rueda 75 mm con electrofreno (2 uds)
1 x Cono Aluminio hélice fija 30 mm diámetro / eje 2,3 mm
1 x ULTIMATUM 2.0 PRO "Full Carbon Red"
1 x BULL MØ1 2.600mm BLUE
1 x ULTIMATUM 2.0 m red/black
1 x BULL MØ1 2.600mm "ALPINE"
1 x Rueda 115 mm con electrofreno (2 uds)
1 x VIPER JET G2 Esq. 3 Naranja/Negro
1 x Extension 50cm Dispaly Royal/Champion SRS
1 x Plancha de limoncillo 600x300x2.0 mm
1 x Pull-Pull set completo acero inox. 3 m (max 20 kg)
1 x Porta Kwik link M3 3 mm (2 pcs)
1 x Plancha de balsa 8,0x100x1000 mm
1 x BULL MØ1 2.600mm "RED BULL"
1 x BULL MØ1 2.600mm GREEN
1 x RANGER Jet Red/Yellow 1.854 mm combo
1 x Boomerang SPRINT V2 Red/Yellow
1 x VIPER JET G2 Esq. 2 Blanco/Rojo
1 x Hélice plegable CAM-Carbon 11x8
1 x Hélice plegable CAM-Carbon 15x8
1 x Hélice plegable CAM-Carbon 13x6.5
1 x Hélice plegable CAM-Carbon 12.5x9
1 x ARS 300 91" ARF 2311mm ORANGE
1 x EXTRA 330L 35% pack hardware (Precision Aerobatics)
2 x Motor KAVAN PRO 2225-1600
1 x Mástil bandera 45 mm
1 x Hélice RABOESCH M5 100 mm (4 Palas) (Hélice izquierda)
1 x Hélice 2 palas 42mm (hélice izquierda)
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x Hélice RABOESCH M5 130 mm (4 Palas) (Hélice izquierda)
1 x Hélice RABOESCH M4 50 mm (3 Palas pr) (Hélice izquierda)
1 x Hélice AERO-NAUT M4 50 mm (3 Palas pr) (Hélice izquierda)
1 x Hélice RABOESCH M4 60 mm (5 Palas) (Hélice derecha)
1 x Banda lijado g. 120 para BSL 220/E (5 pcs)
1 x PVC termo-retráctil batería 58 mm transparente (1 m)
1 x Varilla ABS 1,5x1000 mm
1 x Banda lijado g. 80 para BSL 220/E (5 pcs)
1 x Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x Termo-retráctil negro tubo de 4,8x1000 mm 2:1
1 x UHU Por 50ml/40g
1 x Banda lijado g. 180 para BSL 220/E (5 pcs)
1 x Oracover Rojo Ferrari (2 m)
1 x PVC termo-retráctil batería 165 mm transparente (1 m)
1 x Oracover Negro 10 m
1 x Varilla ABS 5,0x1000 mm
1 x Cable servo PREMIUM 50m (blanco/rojo/azul)
1 x Plancha contrachapado Abedul 600x300x3,0 mm
1 x Plancha contrachapado ABEDUL 600x300x1,0 mm
1 x Plancha de balsa 4,0x100x1000 mm
1 x Bomba de humo JETs PowerBox 2 salidas
1 x Polea de bronce 14/2 (2 pcs)
1 x Plancha de balsa 2,0x100x1000 mm
1 x Plancha de balsa 5,0x100x1000 mm
1 x Terminales riostras M3 (10 uds)
1 x Varilla mando roscada M2,5 (2 uds)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x Eje para motores AXI 2814/xx
1 x Prop Saver para AXI 22xx/xx
1 x Helice GM 20x13 Carbon
1 x Eje para motores AXI 4130 V2
1 x Eje para motores AXI 5325/xx
1 x Adaptador PH6 para eje de 6mm M10 para AXI41xx
1 x Hélice plegable CAM-Carbon 12x10
1 x Hélice plegable CAM-Carbon 14x6
1 x Hélice plegable CAM-Carbon 13x10
1 x Motor 1804 2400KV Qav 250 mini
1 x Hélice plegable CAM-Carbon 10x7 Reverse Rotation
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x ULTRA STICK 30 cc ARF
1 x Tren aterrizaje Electrico ASPIRE (Electron Retracs)
1 x Cinta adhesiva impermeable, ancho 19 mm, largo 25 m
1 x Tubo carbono 3K-PW (Ø25 mm, Ø21 mm L:1000 mm)
1 x Hélice RABOESCH M4 45 mm (3 Palas pr) (Hélice derecha)
1 x Ventanilla de 14 mm para tornillos (10 pcs)
1 x Eje barco de 261 mm M4/M4 6.0x4.0 mm
1 x Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x Hélice RABOESCH M4 45 mm (3 Palas pr) (Hélice izquierda)
1 x Hélice AERO-NAUT M4 45 mm (4 Palas) (Hélice izquierda)
1 x Hélice 44,0 mm (hélice izquierda)
1 x Eje barco de 290 mm M4/M4 6.0x4.0 mm
1 x Hélice de 25,0 mm 3-BL M4 (hélice izquierda)
1 x Hélice RABOESCH M4 70 mm (5 Palas) (Hélice derecha)
1 x Hélice RABOESCH M4 60 mm (4 Palas) (Hélice derecha)
1 x Hélice AERO-NAUT M5 70 mm (4 Palas) (Hélice izquierda)
1 x Eje barco de 290 mm 8/4 M4
1 x Defensas de 38 mm (10 pcs)
1 x Ojos de buey 12 mm (10 pcs)
1 x Eje barco 290 mm 4/4 mm
1 x Hélice AERO-NAUT M4 70 mm (6 Palas pr) (Hélice derecha)
1 x Hélice RABOESCH M4 55 mm (5 Palas) (Hélice Derecha)
1 x Hélice 2 palas 39 mm (hélice izquierda)
1 x Hélice RABOESCH M4 55 mm (5 Palas) (Hélice izda)
1 x Hélice RABOESCH M4 55 mm (5 Palas) (Hélice derecha)
1 x Terminales riostras M2 (10 uds)
1 x Plancha contrachapado Abedul 1520x750x3,0 mm
1 x Eje para motores AXI 2217/xx
1 x Eje para motores AXI 2208/xx
1 x Servo ROBBE FS-31 Pico Servo
1 x Servo Robbe FS 128 BB MG HV Digital
1 x Cono tripala hélice plegable 36 mm diámetro / eje 4,0 mm
1 x Cono plástico blanco hélice plegable 50 mm diámetro
1 x Muleta 38 mm 0º
1 x Cono plástico negro hélice fija 40 mm diámetro
1 x PVC termo-retráctil batería 165 mm transparente (10 m)
1 x Liston ABS 2.0x5.0x1000 mm
1 x Soporte lija 25 mm
1 x Barra pegamento caliente Verde
1 x Adhesivo Leds 2x2 ml
1 x Termo-retráctil rojo tubo de 1,6x1000 mm 2:1
1 x Led Flash (verde - 2 pcs)
1 x Liston ABS 1,0x5,0x1000 mm
2 x Liston ABS I 3,5x1,75x330 mm
1 x Termo-retráctil negro tubo de 19 mm 2:1
1 x Liston ABS 1,5x2,0x1000 mm
1 x Rótula V3 aluminio M3/5 Diam (2 pcs)
1 x Adaptador 2 LiPos XH>EH
1 x Varilla ABS 2,0x1000 mm
1 x PowerBox DigiSwitch V2 JR/JR
1 x PowerBox Amplificador Servos
50,309.45EUR
Fabricantes
Información del Fabricante
Kavan
Otros productos
Idiomas
Español English
Monedas