Top » Catalog » Hardware » Transmitters/Receivers » Receivers » Acc/ Telemetria Jeti » JEXMF2G800

199.90EUR

DUPLEX 2.4EX MFlow2 Gas 800
[JEXMF2G800]

MFlow2-G800 for models with gasoline motors

The MFlow2 Gas 800 is a telemetry sensor that measures the flow of the pumped fuel and calculates its amount in the tank. The MFlow2-Gasoline is a variant for the models powered by glow or gasoline motors. Main features The sensor is compatible with Duplex EX system. EX telemetry values: actual flow and the amount of the fuel in the tank. User adjustable parameters, such as tank capacity, depleted fuel alarm, etc. Firmware updates. MFlow2 consists of the flow sensor and the base. The sensor is connected to the base via a cable with a lock connector. The other cable labeled as „Ext“ is used for the DUPLEX system or the JETIBOX. The flow sensor is fitted with these endings according to the type: MFlow2 G: 2x barbed fittings for tubes with the internal diameter of 2 mm a 2x barbed fittings for tubes with the internal diameter of 3 mm Technical data Technical data MFlow2-Gasoline Measurement range 20-800 ml/min Measurement accuracy ±2% Tubing connection 2x barbed fittings O2 a O3

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
    Receivers->
      Acc/ Telemetria Jeti
      Compatible
      FUTABA
      Graupner
      Hacker
      Hitec
      Jeti
      Mikado
      Multiplex
      PowerBox CORE
      RadioLink
      RCM Pelikan
      Schulze->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAITO FG-120 TSS Boxer 4T
1,800.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Transmitter GRAUPNER MZ-24 Pro
1 x	Propeller POWER-PROP 7x7
1 x	BALSA trip 4.0x4.0x1000 mm
2 x	25 mm reinforced hinge
1 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Horn 6/27 with M3 Bearing
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	CM-3
1 x	MPX-Dean "T" Adapter
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	Civilian pilot "Curt" size 9cm (Slimline)
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	20x200 mm battery rings
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Quicklock washer 3.5 mm (10 pcs)
2 x	Soporte filtro FESTO (4 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Quicklock washer 2 mm (10 pcs)
1 x	BALSA trip 10x10x1000 mm
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	30 cm BEC cable (male)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Horn 5/20 with M2 Bearing
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Quicklock washer 4 mm (10 pcs)
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Brass control horn M4 short for wire (4 pcs)
2 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Adapter lead MPX/XT60
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	1/6 Pilot "Garry"
1 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x	Cabel charger transmitter GRAUPNER
1 x	Glases Innovation Plus
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	4 LiPo XH>EH adapter
2 x	1/12 Pilot "Fighter"
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Horn 6/20 with M3 Bearing
2 x	Beech dowels 2.0 x 1000 mm
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	3 LiPo XH>EH adapter
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Angle support XT60 conector
1 x	Glases Nimbus
1 x	Glases Flitemaster
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
2 x	Pilot JAN 1/4 Saiplanes
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	SE Ring 360 mm (2 pcs)
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	6 mm aluminium horn with patella
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Horn with ball 40x30
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	Piloto Jet "Red" 1/6 Scale
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Small pinned hinge (12 uds)
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	1/10 Pilot "Jack"
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	6 mm blue aluminium threaded horn with patella
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Oracover Azul 2 m
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Spray EC Red 400ml
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Extension silicon 35 cm male (Futaba)
1 x	ABS angle 6,0x6,0x1000 mm
1 x	USB Mini Camera endoscope
1 x	Cable Cargador FUTABA
1 x	Spray adhesive AEROFIX 2
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Oratex Yellow Cub 10 m
1 x	Shaft sleeve LAMA
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Blades 330mm
1 x	PT 22x10 EL Propeller
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Beech dowels 4.0 x 1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Small pinned hinge (6 uds)
1 x	120 mm leg for retract undercarriage with rotation sistem (1 pcs
1 x	Fibra vidrio 25g 110 cm/ 3m (Interglass 02034, finish FE800 pl
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	DUPLEX R7 REX receiver 2,4GHz
1 x	15 mm floating pad (30 pcs)
1 x	2 piece mounting frame
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Conector JR Servo male (50 pcs)
1 x	Interruptor RX/Batterie
1 x	12 mm floating pad (49 pcs)
1 x	Screw M2.5x10 (10 pcs)
1 x	Screw M2x6 (10 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Support ECU Xicoy X-45
1 x	Solarfilm Lite blue transp. 5m
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	SU 29S 140 carbon landing gear
1 x	Legs + electric brakes for Viper Jet 1700 mm
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Fiberglass plate 350x150x1.0 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Foam plastic plates (310x210x3 mm)
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Fiberglass plate 350x150x0.5 mm
1 x	Fiberglass plate 1200x1000x0,2 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	DUPLEX R6G indoor receiver 2,4GHz
1 x	DUPLEX R7 receiver REX Assist
1 x	DUPLEX R18 EX 2,4GHz + Rsat2

6,179.75EUR