Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Brazo servo MKS Doble Metal L:2.5/3 inc
26.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Connectors DEANS (T) micro
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors DEANS (T)
1 x	Bag connector 2 mm
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x	Conector JR Servo male (10 pcs)
1 x	Conector BEC male (10 pcs)
1 x	Conector BEC female (10 pcs)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Conector FUTABA Servo male (10 pcs)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Conector JR Servo female (10 pcs)
1 x	Connectors banna oro 0,8 mm (M/F)
2 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Conector JR Servo female (10 pcs)
1 x	Conector JR/Uni Servo male BLUE silicon (10 pcs)
3 x	Banna gold connector 2,5 mm (M/F)
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	Connector CAN 15
2 x	30 cm DEANS female connector
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
2 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
2 x	Cockpit plastic closing
2 x	Steering arm 12 mm Ø 4 mm
2 x	Cabin latch Fox MDM1 4m (pair)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
2 x	Stainless steel cable Ø 0.5 mm (10 m)
2 x	Covered closure or fairings
2 x	Crimping sleeves for cable 0.85 mm (10 pcs)
2 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
2 x	Straightened rod Ø 7.0 mm x 1000 mm
2 x	Straightened threaded rod M2-1m
1 x	Straightened rod Ø 1.5 mm x 1000 mm
2 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	SlowFlyer control horn (3 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
2 x	2 mm male connector (2 pcs) with safety connector
1 x	BALSA triangular 15x15x1000 mm
1 x	30 cm MULTIPLEX female connector
1 x	2 mm female connector (2 pcs) with safety connector
2 x	Soporte filtro FESTO (4 pcs)
2 x	VPP system propeller for AXI VPP motors (spare)
1 x	Extension 30 cm (Futaba)
1 x	One touch canopy lock
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x	Canopy Lock V1 M3 Blue (2 pcs)
2 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
2 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
2 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	Snap pin for micro clevis (10 uds)
2 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
2 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	80 mm rods set for direction control
2 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Pushrod octagone 4/3 with coupler M3
1 x	Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
2 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Snap long M2 (10 uds)
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Canopy Latch
1 x	Control for forward wheel (MINI)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	45 mm rods + T patellas set for direction control
1 x	Snap for floding prop for 2 mm axi
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Allen wheel collar M3x3
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Landing gear frontal support 25x32x16
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	Pushrod octagone 3/2
1 x	Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Allen wheel collar M3x5
2 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Straightened rod Ø 8.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Support Pitot JETI
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Support Filtro FESTO
1 x	Support FUEL DOT V3
1 x	Recessed MPX connector support (6 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
2 x	Support conector MPX (6 pcs)
2 x	Support Flush MPX Conector (6 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Support ECU Xicoy X-45
2 x	Angle support XT60 conector
1 x	Ring support P-20 OPUS V-Jet 60mm
1 x	50N turbine start protection tube
1 x	ER-40eVo Set A [2x ER40 + RB-45]
1 x	Nose leg 155 mm with wheels 70 mm
1 x	JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x	Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x	Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt
1 x	ER-50eVo Set A [2x ER50 + RB-45]
1 x	Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts)
1 x	ULTIMATUM 2.0 m green/black
1 x	Spinner Alumin. fixed propeller 30 mm / 2,3 mm
2 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Adaptador equilibrador HITEC (XH)
1 x	Cockpit metalic closing
1 x	250 mm / 16 mm Airbrakes
1 x	Jet Afterburner Simulator NF-Jet2
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Brass wire 0.5 mm (25 m)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Press fitting for 0,5 diam. steel cable (10 pcs)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Propeller APC 10x5 Electric
1 x	Jet Pipe 40N-80N (200 mm)
1 x	Fod Guard 94x34 mm
1 x	Bluetooth Adapter JET CENTRAL
1 x	Aceite turbina JetsMunt 1 litro
1 x	Aceite SHELL 560 Turbina 0.9Kg
1 x	Tailormade cone A-10 Skymaster
1 x	Spinner Alumin. fixed propeller 30 mm / 3,2 mm
1 x	CHALLENGER Indoor
1 x	Cable tie mounts 4.3 (4 uds)
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	HITEC Power Supply 30A. Max. 540w
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Cockpit aluminium closing
1 x	PROFI TX fastening rings
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Pushrod octagone 4/3
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Split M1,2x10 (10 pcs)
1 x	Spinner NUT M4
1 x	Propeller POWER-PROP 14x9
1 x	Propeller APC 11x4.7 SF Pusher
1 x	Propeller APC 10x7 Glow/Gas
1 x	Propeller APC 10x4.7
1 x	Propeller APC 11x5.5 Electric
1 x	Propeller APC 11x5 Glow/Gas
1 x	Propeller APC 11x8 Electric
1 x	Propeller APC 11x3.8 SF
1 x	Propeller APC 12x6 Electric
1 x	Propeller APC 10x4.7 SF Pusher

12,614.03EUR