1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Vasa model Catapult
4 x Shirt Hispano Aviación
2 x Vest clothes Hispano Aviación
1 x Screwdriver for Hexagon 1,5mm
1 x Vacuum pump 12 CFM
2 x Copier 2x20 cm pcs
1 x 2,5x60 mm allen screwdriver
1 x Starter EM Gear Power 250
2 x Vacuum Connection VA 1 (for hose Ø 6 mm)
2 x Screwdriver for Torx® TX8
2 x Digital scale up to 40 kg
4 x Cut tube
2 x Copier 5x20 cm pcs
2 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x 
1 x Starter 12v (Max 180 and 30ccm)
2 x Starter Sullivan-STAR 601
1 x Z Bender - S Type Tool
1 x Crimping tool
1 x Ball Link Plier
1 x Hovercraft sailcloth
3 x Hexagonal ball head 2.0 x 50 mm
1 x Extinguisher CO2 - 2 Kg
1 x Round Rod 1,5x1000 mm
1 x Round Rod 1,25x1000 mm
1 x Glases Flitemaster
1 x PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Softshell Hispano Aviación
1 x 3,0x60 mm allen screwdriver
2 x Starter Sullivan-STAR 603 DINATRON
2 x 25 mm Sandpaper file
2 x Fresa corte diamante Ø 2.35mm (flame)
1 x Digital precision scale up to 2000 g
1 x Tachometer HANGAR 9 digital
2 x Steel brush wheel with 2.35mm
2 x Welder 100W/200V
2 x Handle for PERMAGRIT lime
1 x Universal Filter
1 x Tube bender
2 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x 
1 x EC-Cutter
2 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Ball Link Plier
2 x 1,5x50 mm allen screwdriver
1 x Dremel PERMAGRIT 18 mm round lime
1 x Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x Fabric scissors curved (offset handles), 16 cm / 6" length
2 x ABS Strip 1.5x3.0x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
2 x Round Rod 2,0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x 1/6 Pilot "Buddy"
1 x 1/6 Pilot "Cindy"
1 x 1/12 Pilot "Langley"
1 x 1/10 Pilot "Jack"
1 x Control for forward wheel (MINI)
1 x Landing gear frontal support 29x26x13,5
1 x 28x5 mm wires output (2 pcs)
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
2 x Cap Hispano Aviación
1 x Sub-D Plug Mold
1 x Starter EM Gear Power 80
1 x Sealing Iron Sleeve PROF
1 x Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x Tool for entel
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Hose clips 6 mm
1 x Receiver replacement antenna, approx. 85
1 x Canopy Latch
1 x PT 16x10 E Propeller
1 x PropCover 16-20" (2 pcs)
1 x PT 20x13 EL Propeller
1 x Vacuum pump P1-N
1 x Precision wrench L100 mm
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Tool for entel
1 x Dust collector for mould cleaning
1 x Interface Jack Adapter IKARUS
1 x Hot Glue Stick GREEN
1 x Mini-handed clamp
1 x Hot Glue Stick BLACK
1 x Manometer 4 mm
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x Quick hose connector 6-4 mm
1 x Foam plastic plates (310x210x2 mm)
1 x Soporte filtro FESTO (4 pcs)
1 x Support Pitot JETI
1 x Decorative caps, multicoloured
1 x Support Flush MPX Conector (6 pcs)
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x Charger LiPo Charger4
1 x Spikes Band (5 m)
1 x Transmitter Crystal 35 Mc/s Ch 77
1 x Propeller POWER-PROP 7x7
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Blades 330mm
1 x Cierva C30 spanish decoration Stickers
1 x LA500 housing-upper cyclic
1 x Pin hinge 34x16 mm (10 uds)
1 x Ciano KAVAN Thick 20g
1 x BETA 1400 RTF Red
1 x 1 m servo "Premium" wire (white/red/blue)
1 x Adapter lead MPX/EC3
1 x SkyMaxx 1.550 mm (kit)
1 x Cessna SKYLANE T182 1.75m - Seagull Model
1 x SCANNER 46-55 Sport Scale 1:7 ARF
1 x Y Cable
1 x Hot Glue Stick RED
1 x Angle support XT60 conector
2 x Crimping tool
1 x Propeller MEJZLIK 21x10 Electric light (36 g)
1 x Propeller MEJZLIK 22x10 Electric light (36 g)
1 x PT 21x13 EL Propeller
1 x Propeller MEJZLIK 20x13 Electric light (41 g)
1 x Propeller MEJZLIK 20x10 Electric light (36 g)
1 x Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x VPP system propeller for AXI VPP motors (spare)
1 x 42 mm white plastic spinner for fixed propeller
1 x 50 mm black plastic spinner for fixed propeller
1 x Spinner plastic black fixed propeller 30 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x Head core bushing
1 x Head lower part New
1 x Cierva C30 Elevator
1 x Nut M2
1 x Steering lever
1 x LA500 cyclic central part
1 x Motor rotor LA-500
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x Charger SKY RC e680
1 x Combo KAVAN C3536-1250 + KAVANA R50SB +
1 x Electric Fuel Pump 12v
1 x Pin hinge 26x11 mm (10 uds)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x 200m servo "Premium" wire (white/red/blue)
1 x 10m servo "Premium" wire (white/red/blue)
1 x 100m servo "Premium" wire (white/red/blue)
1 x Adapter lead MPX/XT60
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x BlueCom™ Adapter (iOS)
1 x 5 line servos wire black (1 m)
1 x Smoke Oil Blue 5 l
1 x Charging Extension 50cm for 2 Battery
1 x OLED-Display for PowerBox Mercury SRS
1 x 50m servo "Premium" wire (white/red/blue)
1 x Conector JR Servo female (10 pcs)
1 x Extension for SensorSwitch 30cm
1 x Kavan Car 25% nitro 1l
1 x Round Rod 4,0x1000 mm
1 x Screw M3x16
1 x BULLIT Wing 840 mm
1 x Motor MVVS 5.6/690 GLIDER
1 x 10 mm aluminium spinner (Kavan)
1 x Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x Tachometer Hyperion Multi-pala
8,315.50EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies