Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

VSpeak ECU converter KingTech
79.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Device Terminal
1 x	Paramotor Trike XL
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Paramotor BackPack XXS (without accessories)
1 x	Para-RC "RC-Evo-Cross" Rescue
2 x	Telemetry interface ALTIS to Futaba
1 x	Wing OXY 5,0 m2
1 x	Parachute BACKUP X100
1 x	LUCAS pilot ARTF
2 x	Altimeter Altis NAO
1 x	Para-RC Trike "RC-Bullix"
2 x	Telemetry interface ALTIS 12 cm
1 x	Altimeter Altis V4
1 x	GPS Altis
3 x	Wing OXY 0,5 pulgadas2
1 x	Para-RC Mix
1 x	Windsock Ozone L -1200 mm
1 x	Trike XL motor set (motor+esc+prop)
2 x	Ballast 700gr OPALE
1 x	Rescue 1,8m2 / BackPack
1 x	Paramotor BackPack XXS 2
2 x	Telemetry interface ALTIS 20 cm
1 x	Round Rod 2,5x1000 mm
2 x	Strip 3,5x1,75x330 mm
1 x	ABS I Strip 10x5x1000 mm
2 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
1 x	Round Rod 1,5x1000 mm
2 x	ABS Strip 1.5x3.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
2 x	ABS Strip 1.5x2.0x1000 mm
2 x	ABS I Strip 20x10x1000 mm
1 x	Round Rod 1,0x1000 mm
2 x	Round Rod 3,0x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
2 x	Carbon fiber rod 14 mmx1000 mm
3 x	Keypad ALTIS V4
2 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x	Carbon fiber rod 10 mm x 1000 mm
2 x	Carbon fiber rod 1.0 mm x 1000 mm
4 x	Carbon fiber rod 6.0 mmx1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
4 x	Carbon fiber rod 16 mm x 1000 mm
2 x	Carbon fiber rod 2.0 mmx1000 mm
2 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	PIX Hawk with accesories
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
2 x	Quicklock washer 2.5 mm (10 pcs)
4 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
2 x	M3 black washers (4 pcs)
2 x	Quicklock washer 1 mm (10 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
3 x	Flat washer 2.2 mm (20 pcs)
2 x	Aluminium cap bolt washer M4 red (8 pcs)
2 x	Spring lock washer 2.6 mm (20 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Circlik for shaft 1.5 mm (10 pcs)
2 x	Quicklock washer 2 mm (10 pcs)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Vest clothes Hispano Aviación
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Buy Perforated film 100 cm / 50 m
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Aramid 50 daN 50 m
1 x	ABS Strip 1.5x6.0x1000 mm
2 x	Round Rod 6,0x1000 mm
1 x	eFuel 30A Power Supply
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Round Rod 4,0x1000 mm
2 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
2 x	Set freno para ruedas Dia. 127 mm
3 x	Piñon motor rotor LA-500
1 x	LA500 pre-rotation gear hub
1 x	Resistor 3W 5% 2R2
2 x	LA500 tail empennage
1 x	Windsock Ozone L - 700 mm
1 x	Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel)
2 x	Motor rotor LA-500
2 x	4Wx2 Power Navigation Light, 13mm, T-Fuse White
1 x	LED lighting system High Power
1 x	LED wire (rojo - 2pcs)
1 x	LED blink wire flashing (red - 2pcs)
3 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel)
1 x	Opale Rucksack
2 x	NF-2 RC set
1 x	Carbon fiber rod 8.0 mmx1000 mm
3 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	NF-3X-80 liner Kit
2 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Propeller balancer
2 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Cap closure 33/23.5mm (2 uds)
2 x	Allen wheel collar M3x5
2 x	250 mm / 16 mm Airbrakes
1 x	Carbon fiber rod 0.5 mmx1000 mm
2 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
2 x	Carbon fiber rod 20 mmx1000 mm
1 x	Jet Afterburner Simulator NF-Jet1RY Set
1 x	Tube Pitot to PIXHAWK
1 x	Jet Afterburner Simulator NF-Jet2YY Set
1 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Blades 330mm
1 x	Threaded insert M6 (10 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Socket Head Screw M2x8
2 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
2 x	Lock washer 3.2 mm (20 pcs)
1 x	T-Motor U7-V2.0 Kv420
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	SKY RC T400Q Charger 4x100w
1 x	SKY RC Temperature Sensor
2 x	Charger SKY RC D200 neo
1 x	Motor OS 3820-1200 electric
1 x	2.3 mm Adapter for 30 mm spinners
1 x	LA500 nose
1 x	Blade holder center
1 x	LA500 front gear holder
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	Propeller POWER-PROP 10x7
1 x	LA500 housing-upper cyclic
1 x	11 mm Rubber pads (14 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Allen wheel collar M3x3
1 x	Steering arm 16 mm Ø 4 mm
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	28x5 mm wires output (2 pcs)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Snap pin for micro clevis (10 uds)
1 x	Tip wing protector 30x10 (2 pcs)
2 x	38x4,5 mm wires output (2 pcs)
1 x	45 mm rods + T patellas set for direction control
1 x	Threaded insert M3 (4 pcs)
1 x	Nut for mounting M3 (10 pcs)
1 x	Retract undercarriage
1 x	8Wx2 Navigation & Strobe, 11mm Red/White
1 x	14 mm Portholes for screws (10 pcs)
2 x	8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x	3,2 mm Prop Adapter M6
1 x	29,0 mm propeller (left propeller)
1 x	LA500 pilot-seat set
2 x	Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel)
1 x	LED blink wire flashing (orange - 2pcs)
1 x	3x8W Triple-Spotlight, 12mm, T-Fuse White
1 x	LA500 freewheel bearing
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	LED wire (orange - 2pcs)
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	Connectors MPX male
1 x	Propeller POWER-PROP 14x10
1 x	LED wire (green - 2pcs)
1 x	Propeller POWER-PROP 14x12
2 x	LA500 ciclic lever
1 x	Propeller electric carbon 10.5x6
1 x	LA500 rotor head shaft
1 x	Cable video GoPro and 5V cable
1 x	TX 250 mW especial GOPRO
1 x	Micro Tarjeta SD Rapid Rush 16 GB
1 x	Conector JR Servo male (50 pcs)
1 x	Cable video GoPro
1 x	3.2 mm Prop Adapter M6
1 x	Canopy Latch
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Snap long M2 (10 uds)
1 x	Cockpit plastic closing
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Split M1,2x10 (10 pcs)
1 x	Tip wing protector 28x10x12 (2 pcs)
1 x	Snap for floding prop for 2 mm axi
1 x	Snap short M2 (10 uds)
1 x	Landing gear frontal support 29x26x13,5
1 x	Steering arm 16 mm Ø 3 mm
1 x	Split pin 1x8 mm (10 uds)
1 x	41x5,5 mm wires output (2 pcs)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Cable grommet Ø 5 mm (4 uds)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	LA500 rotor head core
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	Threaded insert M4 (4 pcs)
1 x	Nut for mounting M5 (4 pcs)
1 x	Lock nut M4 (10 pcs)
1 x	Blind nut M4 (4 pcs)
2 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Nut for mounting M2 (4 pcs)
2 x	Screw M2x6 (10 pcs)
2 x	Hexagonal Nut M4 (10 pcs)
1 x	Blind nut M5 (4 pcs)
2 x	Charger ISDT 608AC 200W
1 x	Servo HITEC HS-311
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Servo case HS-225MG/225BB/5245MG
1 x	Servo HITEC D625 MW
1 x	Pan Head Screw M2x6 PH
1 x	Socket Screw M3x9 mm
1 x	Tapping Screw M2.2x9.5 (10 pcs)
1 x	Screw M2.5x10 (10 pcs)
1 x	Servo HITEC D131 MW nano
1 x	HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x	Combo RAY C3542-1000 + ESC 60A
1 x	Hexagonal Nut M2 (10 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Pan Head Screw M2x8 PH countersunk head
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Hexagonal Nut M4 (20 pcs)
1 x	Pan Head Screw M2x8 PH
1 x	Pan head screw M2x16 PH
1 x	Tapping Screw M2.2x65 (10 pcs)
1 x	Lead with adhesive (2 pcs)

11,203.19EUR