1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
2 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
2 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
2 x Carbon fiber rod 0.5 mmx1000 mm
1 x Squared carbon wing joinner 5x5x220 mm
2 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
2 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
2 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
2 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Straightened threaded rod M3 - 1m
2 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
2 x Straightened rod Ø 4.5 mm x 1000 mm
2 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
2 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Connectors DEANS (T)
1 x Strip 1,5x1,5x330 mm
1 x ABS Strip 1.5x4.0x1000 mm
2 x ABS I Strip 20x10x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x Para-RC Mix
1 x Wing OXY 5,0 m2
1 x Rescue 1,8m2 / BackPack
1 x Trike XL motor set (motor+esc+prop)
2 x ABS Strip 1.0x2.0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x Round Rod 3,0x1000 mm
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Round Rod 4,0x1000 mm
1 x Round Rod 2,0x1000 mm
1 x Round Rod 1,25x1000 mm
1 x Strip 2,5x1,25x330 mm
1 x Parachute P4
1 x Ballast 700gr OPALE
2 x Windsock Ozone L - 700 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x Paramotor BackPack XXS (without accessories)
1 x Strip 2,0x2,0x330 mm
1 x Wing OXY 0,5 pulgadas2
1 x Tape GFK 38 mm
1 x SE Ring 330 mm (4 pcs)
1 x SE Ring 360 mm (2 pcs)
2 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 20x200 mm battery rings
1 x Marker ties (20 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Tape GFK 50 mm
1 x Nylon hinge 15x0,3 (10 pcs)
1 x 2 mm male connector (2 pcs) with safety connector
1 x White silicone 0,25 qmm wire (100 m)
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Piloto JET 1:3,5
1 x Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Support pump Xicoy X45
1 x Support pumb/filter Xicoy X45
2 x Stickers-digit for marking
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x Opale Rucksack
1 x Universal Charging Lead - 500mm - 4mm to Glow Plug Igniter
1 x Windsock Ozone L -1200 mm
1 x Round Rod 1,0x1000 mm
1 x Glow Plug Clip 1.3 Ah
1 x Kontronik ProgUnit
1 x ProgBOX MASTER Hacker
2 x DYMOND VTX UBS Programming adapter
1 x Jeti Advance Plus Program Card
1 x XH female balance (6S) connector (2 pcs)
1 x XH male balance (6S) connector (2 pcs)
1 x XH female balance (7S) connector (2 pcs)
1 x XH male balance (7S) connector (2 pcs)
1 x XT-90 connector (pair)
1 x XH male balance (8S) connector (2 pcs)
2 x Interface Realflight Simulator
1 x XT-60 connector (male)
1 x Logo 400 SE VBar
1 x ABS Strip 1.5x8.0x1000 mm
1 x Para-RC Trike "RC-Bullix"
1 x Aramid 50 daN 50 m
1 x SE Ring HACKER 300 mm (2 pcs)
2 x 
1 x Turbina JetsMunt VT98 NG
1 x Turbina X45 H "Light Version"
1 x Bomba KP500V Kingtech
1 x KingTech Turbineoil 1L
1 x Battery LiFe -2100/25C-3S 9.9V
1 x Scale exhaust K100TP
1 x Burner Plug K30/ K45
1 x Filter KingTech
1 x Turbina KINGTECH K320 G5
1 x Battery LiFe -3000/25C-3S 9.9V
1 x Kontronik connector (10 connectors, 5 pairs)
1 x Wing conexion 2 servos JR/Graupner 50 cm
1 x SIMtransmitter 6 Mode 2
2 x Slave-cable USB Easy Sim
1 x 21x12D BIELA propeller (3-blades)
1 x 23x10 BIELA propeller (4-blades) Scale
1 x Propeller MENZ-S 16x6 3-Blades
1 x Kit wheel loader 966G II without electrics, without hydrauli
1 x Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs
1 x Parachute BACKUP X100
1 x MPX screwable clips (4 pcs)
1 x Soldering PCBs 8pin, 5 pieces
1 x Servo Connector Brackets (10 pcs)
1 x XT60 Connector with Holder Male 2pcs
1 x MPX PCB "4 Pins", 5 pieces
1 x Bag connector 2 mm
1 x Contacto macho pin conector (10 pcs)
1 x MPX housing with flange (4 pcs)
1 x PIN Connector female (100 pcs)
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x RF9 Flight Simulator with Spektrum Controller
1 x Propeller MENZ-S 17x8
1 x 24x8 BIELA propeller
1 x JetiBOX
1 x Propeller MENZ-S 19x8 3-Blades
1 x 18x10 BIELA propeller SCALE (3-blades)
1 x Propeller MENZ-S 16x12
1 x Propeller MENZ-S 20x6
1 x PROFI Box JETI
1 x 22x10 BIELA propeller
1 x Propeller MENZ-S 15x12
1 x Propeller MENZ-S 19x12
1 x Propeller 8x4 Electric
1 x 22x8 BIELA propeller
1 x Propeller 9x4,7 SlowFlyer
1 x Propeller 3x2
1 x 24x10 4Bl Scale
1 x Propeller MENZ-S 18x8 3-Blades
1 x Propeller RABOESCH M4 70 mm (5 Blades) (Left)
1 x XT-30 connector (pair)
1 x Plastic fan 17x48 mm (2 pcs)
18,517.94EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies