Top » Catalog » Hardware » Lights/Ilumination » Emcotec » EMCOPTO7006

45.00EUR

Combo lighting module with covering drop shape
[EMCOPTO7006]

Combo lighting module with covering drop shape
Completly readymade position light/anti collision light (ACL) in combi housing with an aerodynamic drop shaped scale covering. Suitable for flashing (ACL) and for permanent operation (position light).
PLUG & SHINE! connections
For installing the position light/ACL no soldering is necessary.
The position light/ACL is fully wired with approx. 6cm (2.36in) connection cable and two-pole socket. It can be plugged to the enclosed lighting voltage regulator then it can be connected to a light control unit (e. g. Optotronix Aurora LCU EVO2, item no. OPT2000) with the optional available lighting patch cable (item no. OPT4740).
With the optional available lighting distribution board (item no. OPT7020) up to three positionlights/ACLs or e. g. landing lights can be operated on one lighting channel.
Connection and wiring hints
All PLUG & SHINE! lighting modules can be plugged to the MPX connector with pin strip, plug & socket (item no. A85400) or the Wing connector 8pin with pin strip, plug & socket (item no. A85405). See also tab Accessories etc.
Delivery contents
Position light/ACL combi with covering drop shape (color according to variant selection)
Lighting voltage regulator for 1S LiPo/LiIon battery
Shrinking hose for cable fixing
Important hints
Position lights/ACLs must not be operated longer than 15 minutes in permanent operation. The LED are going to be very hot!
The position light/ACL can only be operated with a 1S LiPo/LiIon battery. CAUTION
LED is very bright, don't look into the cone of light from closer distance. This could cause damage of the retina.

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
    Emcotec
    JET CENTRAL
    Multiplex
    Night Fly
    OptoTronix
    Pichler
    PowerBox
    UNILIGHT
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
2 x	20x200 mm battery rings
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x	Tape GFK 38 mm
1 x	Tape GFK 25 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 350 mm (2 pcs)
2 x	Marker ties (20 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 200 mm (2 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	20x1000 mm Ring Strap Back To Back
2 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Tape GFK 50 mm
1 x	SE Ring 360 mm (2 pcs)
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
2 x	Profile ABS half cane 2.5x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
2 x	Pilot "Anthony" (Slimline)
2 x	L-Connector 4.0 mm x 1000 mm
1 x	Piloto Jet "Red" 1/6 Scale
2 x	1/12 Pilot "Tom"
1 x	1/6 Pilot "Cindy"
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x	1/6 Pilot "Garry"
1 x	ABS angle 2,0x2,0x1000 mm
1 x	1/4 Pilot "Heidi"
2 x	Profile ABS Square 4 x 1000 mm
1 x	Pilot "Adolf" Legends Series (Slimline)
3 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	Pilot "Duke" Legends Series (Slimline)
2 x	ABS angle 3,0x3,0x1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Profile ABS Square 2 x 1000 mm
1 x	Pilot "Goose" (Slimline)
1 x	Militarian pilot "Fly Boy" size 9cm (Slimline)
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	1/7 Pilot "Japanese"
1 x	1/12 Pilot "Langley"
2 x	1/12 Pilot "Cougar"
4 x	Civilian pilot "G-Man" size 9cm (Slimline)
3 x	Extinguisher CO2 - 2 Kg
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Straightened rod Ø 1.2 mm x 1500 mm
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Smoke set "S"
1 x	2,0x50 mm allen screwdriver
1 x	Support conector MPX (6 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x
2 x	DPSI V-Match
2 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
3 x	ABS angle 1.5x1.5x1000 mm
1 x	Rubber profile 6-2 mm 2M
1 x	Rubber profile 10-2 mm 2M
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Profile ABS half cane 4x1000 mm
2 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	1/10 Pilot "Jack"
2 x	1/6 Pilot "John"
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	Piloto JET 1:3,5
2 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Set montaje amortiguador para modelos 8-16 Kg
1 x	Tren de cola carbono 50-70cc
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x	Tailwheel for 1-3 kg models
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	Tail wheel for 8-12 kg models
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	VAGABOND 1500 mm ARF V2 (Blue)
1 x	XT-90 connector (pair)
1 x	MPX Support (2 pcs)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Soldering PCBs 8pin, 5 pieces
1 x	MPX PCB "4 Pins", 5 pieces
1 x	Soporte carbono MR30 (2 pcs)
1 x	VAGABOND 1500 mm ARF V2 (Red)
1 x	Swift ARF 2000 mm Red (Hacker Model)
1 x	Combo lighting module with covering drop shape
2 x	DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
1 x	EWC3 40 cm wing connector
1 x	T-Motor MN705-S Kv125 (pack 2 uds)
1 x	BALSA triangular 15x15x1000 mm
1 x	DPSI OCP Overload protection
1 x	14 mm Portholes for screws (10 pcs)
1 x	3,2 mm Prop Adapter M6
1 x	3.17 mm Prop Adapter CN-Spinner
1 x	GPS, Vario and altitude Sensor SBS-01G
1 x	25 mm fenders (10 pcs)
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Switch magnet for gas cap and magnet switch actuators
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	Optotronix X-Carrier
1 x	DPSI Micro MPS
1 x	Emcotec SPS Magnetic Switch Actuator
1 x	DPSI LR-S (with push buttons)
1 x	DPSI RV Mini 5 (2008)
1 x	Servo-V-Limiter 5.2V
1 x	DPSI Ampere & Voltage bundle
1 x	DPSI Micro - RCS
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	OPTOTRONIX Aurora LCU
1 x	DPSI Micro - RCS RV
1 x	DPS Switch JR/JR
1 x	DPSI RV Mini 6 Magic
2 x	DPSI magnetic switch actuator (PCB)
1 x	DUPLEX 2.4EX Central Box 220
1 x	GPS Logger Dymond
1 x	290 mm M4/4 mm Prop shaft
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	16x10 tree blades propeller Master Airscrew
1 x	12 mm mast holder
1 x	3 mm Prop Adapter M6
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	12 mm portholes (10 pcs)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	3 mm Leader (L 100 mm)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	2,3 mm Prop Adapter M6
1 x	15x7 tree blades propeller
1 x	12x8 tree blades propeller
1 x	10x7 tree blades propeller
1 x	290 mm 8x4 M4 shaft ship
1 x	Propeller MEJZLIK 9,5x3 SF Carbon Indoor
1 x	Propeller MEJZLIK 22x10 Electric light (36 g)
1 x	PropCover 16-20" (2 pcs)
1 x	GPS Expander Module
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Profile ABS half cane 2.0x1000 mm
1 x	POWERBOX Magic Jeti Switch Royal SRS, Champion SRS
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Fueling valve "Air"
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Servo Connector Brackets (10 pcs)
1 x	XT-30 connector (pair)
1 x	XH female balance (6S) connector (2 pcs)
1 x	XH female balance (2S) connector (2 pcs)
1 x	XH female balance (8S) connector (2 pcs)
1 x	XH male balance (3S) connector (2 pcs)
1 x	Ferrita 14x8x5.5 mm

7,525.48EUR