1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x SIMtransmitter 6 Mode 2
1 x Crimping tool
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Conector MR-60 (pareja)
1 x Starter EM Gear Power 80
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x Adaptadores carga 6s JST-XH
1 x ABS tube 7.0x6.0x1000 mm
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
2 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 5.0x3.0x1000 mm
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 8.0x6.0x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
1 x ABS tube 7.0x5.0x1000 mm
2 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x ABS tube 5.0x4.0x1000 mm
2 x ABS tube 6.0x4.0x1000 mm
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x 6 mm aluminium horn with patella
1 x Horn 6/27 with M3 Bearing
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Horn 6/35 with M3 Bearing
1 x Brass control horn M3 short for wire (2 pcs)
1 x Horn 5/10 with M2 Bearing
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Horn for flap control (1 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Strip 2,0x2,0x330 mm
1 x Field folding model stand
1 x Prop Holder AXI 41xx V2
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x HOPPER tank Digitech 250 ml (Festo nipples 6 mm)
1 x Wing Joiner ULTIMATUM 2.0 m
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
2 x Racor 2/3 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Micro control horn (2 pcs)
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
2 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x 6 mm M3 variable inclined horn
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x Medium extra-strong control horn with bearing 2,8x24
1 x Long adjustable control horn 3x34
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x Long horn 50x26
1 x 6 mm M3 variable horn
1 x 5 mm M2 variable inclined horn
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Soporte carbono MR30 (2 pcs)
1 x XT-30 connector (pair)
1 x XH male balance (4S) connector (2 pcs)
1 x XT-60 connector (female)
1 x XH female balance (8S) connector (2 pcs)
1 x XH female balance (6S) connector (2 pcs)
1 x XH male balance (2S) connector (2 pcs)
1 x XH male balance (3S) connector (2 pcs)
1 x XT60 Connector with Holder Male 2pcs
1 x XH male balance (8S) connector (2 pcs)
1 x XH female balance (3S) connector (2 pcs)
1 x Soldering PCBs 8pin, 5 pieces
1 x Xplorer4 anemometro
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x 120x60 mm SLH KOVO wheel
1 x Turbina X132 H "Compact Version"
1 x Turbina JetsMunt VT98 NG
1 x 3,9 mm ZG20-ZG38 servo arm
1 x CC 05
1 x PSC 6
1 x Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Aro pasacable Ø20 mm (4 pcs)
1 x Ball Link Plier
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Actuador lineal HLS12-100210-7.4v
1 x PSC 5
1 x Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green
1 x Jet Afterburner Simulator NF-Jet1RY Set
1 x 2,3 mm Prop Adapter M6
1 x Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x 5 mm Prop Adapter M6
1 x 4 mm Prop Adapter M8
1 x Prop Shaft Adapter 4 mm/M8 "long" 35 mm
1 x Prop Shaft Adapter 5 mm/M8 "long"
1 x 5 mm Prop Adapter CN-Spinner
1 x HBC 10035-3 32-Bit
1 x 3.2 mm Prop Adapter M6
1 x 5 mm Prop Adapter M8
1 x GPS Sensor + Logger OPTronics
1 x Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x GameCommander USB Universal
1 x 2.3 mm Adapter for 30 mm spinners
1 x 3.2 mm Prop Adapter M8
1 x A/C quality beech plywood 600x300x0.8 mm
1 x 3,2 mm Prop Adapter M8
1 x 3 mm Prop Adapter M6
1 x 6 mm Prop Adapter M8
1 x 6 mm Prop Adapter M8
1 x 10 mm Prop Adapter M12
1 x 2,3 mm Prop Adapter M6
1 x USB Adaptor OPTronics
1 x SINGLE FUELING VALVE GASOLINE MK2 SMALL
1 x OS 40-FG 4T Motor
1 x Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x 5 mm Prop Adapter M8
1 x 3 mm Prop Adapter M6
1 x Motor SAITO FG-61 TS
1 x Prop Shaft Adapter 5 mm "long"
1 x 4 mm Prop Adapter M8
1 x 4 mm Prop Adapter CN-Spinner
1 x 3,2 mm Prop Adapter M6
12,437.48EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies