1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x SyRen 50A 6V-30V Regenerative Motor Driver
3 x SyRen 10A 6V-24V Regenerative Motor Driver
1 x Servo NARO Max Std
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x 
1 x Hovercraft sailcloth
1 x Turbina KINGTECH K320 G5
1 x Starter EM Gear Power 80
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Extension MPX-MPX 20 cm
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x ESC Actro-Marine 30A
1 x SCHARNHORST Battleship 1:200
1 x 42,0 mm propeller (rigth propeller)
2 x Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x 38 mm fenders (10 pcs)
1 x 25 mm fenders (10 pcs)
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
2 x Refueling Cap V3 Black
1 x Gasket electric Fuel Pump
1 x Electric Fuel Pump 12v
1 x Receptor CORE PBR-26XS 26ch
1 x ABS 500 x 400 x 1 mm (white)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Compact on-board starting system (9525)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x XPower XC5030/14 LS
1 x A50 Backmountset complete V3/V4
1 x Motor A50-14L Turnado V3 Glider
1 x Motor A30-12 XL Glider
1 x Motor A40-10 L V2 14-Pole Glider
1 x SERVO DES 707 BB MG, Pignons
1 x SERVO DES 588 BB MG
1 x SERVO DES 806 Pignons
1 x SERVO DES 568 MG
1 x Motor A50-16 S V4
1 x A40-10S V2 8-Pole + 6,7:1 PG
1 x Motor A60-7XS V4 28-pole kv330
1 x Axle for motor A20-S (3 uds)
1 x Motor A30-10 XL V4
1 x Motor A40-10S V4 14-Pole
1 x Motor A20-22 L EVO
1 x Motor A50-10L Turnado V3 Glider
1 x A50 Backmountset complete
1 x Motor A20-20 L EVO
1 x SCHARNHORST accessories
1 x Motor A20-6 XL 10-Pole EVO + 4,4:1
1 x Motor A200-8
1 x Servo HBS 690BB HV Digital
1 x Cannon 12.7 cm (2 pcs)
1 x Boat with oars 110 mm
1 x Bisagra de remo metal 28 mm de largo (2 pcs)
1 x Capstan of plastic 88x30x36 mm
1 x Housing Ø 11 mm (20 pcs)
1 x Klumpblock (Plastik), Höhe 5 mm, 1 Rille, 20 Stück
1 x MG cannon 1.8 cm (5 pcs)
1 x Servo FUTABA BLS 276SV
1 x Boat 43 mm (5 pcs)
1 x Cancamo con aro 16/6.5 mm (10 pcs)
1 x Futaba BLS152 - Upper Case
1 x Bocina 30 mm (1 pcs)
1 x Bocina Ms 18 mm (3 pcs)
1 x Klumpblock (Plastik), Höhe 4 mm, 2 Rille, 20 Stück
1 x Klumpblock (Plastik), Höhe 6 mm, 2 Rille, 20 Stück
1 x Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x Klumpblock (Plastik), Höhe 6 mm, 1 Rille, 20 Stück
1 x Kardan Black (without pinions)
1 x Futaba S9650/9670SV - Upper Case
1 x Pump 12 V
1 x Housing Ø 15 mm (20 pcs)
1 x HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
1 x Servo HITEC HS-5585MH
1 x Servo HITEC HS-5245 MG Digi
1 x Servo HITEC HS-45 HB, servo box
1 x 65 mm mini servo cover
1 x Servo HITEC D950 TW
1 x Servo HS-5565MH High Voltage
1 x Servo HITEC D645 MW
1 x 90x60 mm standart servo cover
1 x Servo HITEC D941 TW
1 x Rigid coupling brass Ø 3 mm L: 20 mm
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Ancla Admiralsanker 60 mm (2pcs)
1 x Ancla 35 x 22 mm (2 pcs)
1 x Railing L250 mm (10 pcs)
1 x Ancla 40 x 24 mm (2 pcs)
1 x Rigid coupling brass Ø 4.0 / 2.3 mm L: 20 mm
1 x Rigid coupling brass Ø 5.0 / 4.0 mm L: 25 mm
1 x Spinner Alumin. fixed propeller 45 mm / 5,0 mm
1 x Spinner 82mm Black ventilado
1 x F3A carbon 82 mm spinner for 12 mm axis
1 x FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent)
1 x FESTO connector M7 barb fitting 4mm
1 x Xoar Electric Beechwood Prop 16x7
1 x Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x Cono NUT 5/16"x 24 -M4
1 x F3A carbon 95 mm spinner
1 x 51 mm INO spinner (carbon imitation)
1 x FESTO connector M7 barb fitting XL Tygon
2 x Recess mount-rem. glow plug set
1 x Ignition bed V2 Red color
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
13,281.79EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies