Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	XT-60 connector (female) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Servo JETI DSHV 3D13T (13 Kg)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
2 x	ABS Strip 1.5x8.0x1000 mm
2 x	Round Rod 2,5x1000 mm
1 x	Strip 2,0x2,0x330 mm
2 x	ABS I Strip 20x10x1000 mm
2 x	Round Rod 5,0x1000 mm
2 x	ABS Strip 1.0x3.0x1000 mm
1 x	Strip ABS 2.0x3.0x1000 mm
2 x	Strip 2,5x1,25x330 mm
2 x	Round Rod 4,0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Round Rod 3,0x1000 mm
2 x	ABS Strip 1.5x3.0x1000 mm
2 x	Big Crow DLE-170M
1 x	Motor DLE 430 cc - Paramotors
1 x	90x75 mm standart servo cover
1 x	57 mm micro-mini servo cover
1 x	50x45 mm micro-mini servo cover
1 x	13 mm wing servo holder
1 x	58 mm micro servo cover
2 x	Profile ABS Square 1 x 1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
2 x	Horn 6/20 with M3 Bearing
2 x	Brass control horn M4 short for wire (10pcs)
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	6 mm M3 variable inclined horn
2 x	20 mm carbon horn
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Horn 6/27 with M3 Bearing
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Cable control set
1 x	Cable with accesories
2 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Brass control horn M2 short for wire (2 pcs)
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn 5/10 with M2 Bearing
2 x	ABS angle 3,0x3,0x1000 mm
1 x	Rubber profile 10-2 mm 2M
2 x	Horn mando small (2 pcs)
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	Rubber profile 6-2 mm 2M
1 x	6 mm blue aluminium threaded horn with patella
2 x	ABS angle 1.5x1.5x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	Profile ABS half cane 4x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
3 x	Control horn long w/ball
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
2 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Horn 20x28,5 mm (2 pcs)
2 x	Horn F3A de Titanium 16 mm (2 units)
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Horn with ball 40x30
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Profile ABS half cane 5.0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 90º
2 x	Profile ABS half cane 3x1000 mm
1 x	Brass control horn M3 short for wire (2 pcs)
1 x	Brass control horn M2 large for wire (2pcs)
2 x	Flat Connector 4.0 mm x 1000 mm
1 x	Horn mando long (2 pcs)
1 x	Profile ABS half cane 2.5x1000 mm
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Rubber profile 8-2 mm 2M
1 x	Futaba 38 mm servo arm
1 x	Servo HITEC D131 MW nano
1 x	37 mm PVC transparent battery termo-retract (1 m)
1 x	6,4x1000 mm 2:1 green termoretract tube
2 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	Tape GFK 25 mm
1 x	Servo SAVOX SB-2290 SG
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Adjustable brass horn threaded M3
1 x	Round Rod 6,0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
2 x	Strip ABS 2.0x8.0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Xplorer2 anemometro
1 x	TMM 1210-3S heli
1 x	Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x	1/4 Pilot "Heidi"
1 x	Servo SAVOX SV-0236 MG HV
1 x	Servo SAVOX SA-1256 TG
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	25 mm reinforced hinge
1 x	Flap hinge (6 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Motor DLE 200cc Premium Muffler
1 x	Small Crow DLE-170M
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	Round Rod 1,5x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	RH long aluminium horn (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Small control horn with bearing (2 pcs)
1 x	Micro control horn (2 pcs)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	Horn DUBRO 1/2A
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened rod Ø 7.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Xplorer3 anemometro
1 x	Xplorer4 anemometro
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	HBC 10035-3 32-Bit
1 x	Silent-blocks DLE 170M
1 x	Propeller FALCON 32,5x11 PUSHER Carbono
1 x	Piston ring for DLE-55/111/222
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	DPSI RV Mini 5 (2008)
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	DPSI Micro - RCS
1 x	Long pinned hinge (6 uds)
1 x	Gates hinge
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Propeller POWER-PROP 13x8
1 x	Propeller electric carbon 8.5x7
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	CC 11 Conector
1 x	CC 02
1 x	TMM 2512-3S heli

12,786.71EUR