99.90EUR

Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
[FPV4140-673]


This is a mini all-in-one Sony 4140+673 CCD Board Camera with Built-in 200mw TX and Pre-soldered Circular Polarized antenna.

This CCD board adopts with SONY newest generation image processing technology Enhanced Effio-eSuper. The high horizontal resolution up to 700TVL is performanced as well as unique 2D-DNR technology significantly improve the low-light environment with better image quality. Powerful OSD menu includes Brightness, Contrast, Saturation adjusting functions; Multi-area, White Balance, AGC, and other functions ensure clear bright pictures.

CCD Specifications:
- Model: SONY 4140+673
- DSP+CCD: CXD4140GG+D5148GG+673
- Exposure: Electronic exposure
- Image Sensor: 1/3 Sony 960H CCD Sensor
- Signal System: PAL/NTSC
- Pixels : PAL: 1020H× 596V (610000 pixel) NTSC: 1020H× 508V (520000 pixel)
- Effective Pixels: PAL: 976H× 582V (570000pixel) NTSC: 976H× 494V (480000pixel)
- Definition: 650/700TVL(BW) 650/700TVL(BW)
- Minimum illumination: 0.01Lux/F 1.2
- Video Output: 1.0Vp-p75Ω
- Sync: Internal Synchronization
- Shutter speed: 1/50(1/60) ~1/100, 000(s)
- AGC(automatic gain control): +18dB maximum
- Gain Control: Auto
- DNR (Digital Noise Reduction): 2DNR Support 0~15 16 grade adjustable
- Wide dynamic: Digital wide dynamic 0-60
- OSD: support
- Automatic gain control: 0.25/0.50/0.75/1.00
- Aperture control: yes
- Backlight compensation: HLC / Backlight Compensation
- Backlight compensation: Auto
- SNR: 52dB(minimum) / 60dB(Maximum)(AGC automatic closing)
- Gamma correction: 0.45/1.0
- White Balance: On / OFF switch
- Power: DC12V± 5%
- Ambient temperature: -20 ~ +60
- Size: 25×25

TX Features :
- Frequency: 5.8G wide-band FM video/audio tx
- Transmittion Power: 200mw 23dbi
- 24 Channels
- Sterieo audio: L/R audio channel
- Full format PAL / NTSC.
- PAL CCD default standard , ( NTSC need to customize the CCD 672 )


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x Flat washer 1.7 mm (20 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Spring lock washer 4.1 mm (20 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Quicklock washer 1.5 mm (10 pcs)
1 x M3 black washers (4 pcs)
1 x Flat washer 4.3 mm (20 pcs)
1 x Aluminium cap bolt washer M3 green (8 pcs)
2 x Threaded coupler ALU M3 Ø 6 (2 uds)
2 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Ball link Aluminio M3 (2 pcs)
2 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Ball Link M2 with Ball and Hardware, 10 pcs
2 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
2 x Threaded coupler M2 (10 uds)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Angled clevis with threaded rod M3
3 x Z type of cable coupler Ø 2 (2 uds)
2 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Propeller balancer
1 x Truck-trailer for gliders 720 x 239 mm
1 x WingFix ULTRA Black Edition
1 x Propeller balancer
1 x Angle measurer
1 x Field folding model stand SebArt
1 x Field folding model stand
2 x Extension PVC 150 cm (Graupner)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Premium servo extension 50cm
1 x Extension silicon 100 cm (Futaba)
1 x Cabel "Y" 30 cm (graupner)
1 x Extension silicon 10 cm (Graupner)
2 x Extension silicon 30 cm female (Graupner)
2 x Extension silicon 35 cm male (Futaba)
1 x Extension silicon 30 cm male (Futaba)
2 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension silicon 10 cm (Futaba)
2 x Extension silicon 30 cm female (Futaba)
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
2 x Extension 15 cm (Futaba)
2 x Extension 90 cm (Futaba)
1 x Cabel "Y" 30 cm (Futaba)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
2 x Prolongador S-Bus JR/JR 20cm
1 x Cabel "Y" 15 cm
1 x M2,5 5Diam metal ball link V3 (2 pcs)
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x Sanyo RX Battery Eneloop RX 4,8 V Futaba
1 x Sanyo TX Battery Eneloop 9,6 V 2500 mAh
1 x Sanyo RX Battery Eneloop 6,0 V Futaba
1 x Soporte filtro FESTO (4 pcs)
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
2 x Kwik link AL M3 con Clip (2 pcs)
1 x Blue Aluminium lock nut M3 (4 pcs)
1 x Lock nut M4 (10 pcs)
1 x Nut for mounting M2,5 (4 pcs)
1 x Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Small kwik link (10 pcs)
1 x Porta Kwik link M4 4 mm (2 pcs)
1 x Threaded coupler M3 (10 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Pulley brass 16/2 (2 pcs)
1 x Cable coupler M3 (10 uds)
1 x Micro clevis (10 uds)
1 x Turnbuckle M2,5x32/48 (2pcs)
1 x Pulley brass 6/1,5 (2 pcs)
1 x Nut for mounting M3 (4 pcs)
1 x Pan Head Screw M2x8 PH
1 x Rubber bushing with bracket "A" type (2 pcs)
1 x Floating M3 washer pad (36 pcs)
1 x Rubber bushing with bracket "B" type (2 pcs)
1 x Turnbuckle M2x22/35 (2pcs)
1 x Nut for mounting M6 (4 pcs)
1 x Pan Head Screw M1,6x6 (10 pcs)
1 x wire tensioner (red)
1 x Profile ABS half cane 2.5x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x LiPo KAVAN 3700 mAh 11.1v 40/80C
1 x Screw M2.5x8 (10 pcs)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Micro clevis 0.8 mm(10 uds)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Lock nut aluminium M3 (4 pcs)
1 x Set clevis for pull-pull (TY13233 & TY13234)
1 x Screw M4x20 (10 pcs)
1 x Turnbuckle M2,5x27/43 (2pcs)
1 x wire tensioner (black)
2 x Turnbuckle M1,6x17/27 (2pcs)
1 x Lock nut aluminium M2 (4 pcs)
1 x Flat washer 2.7 mm (20 uds)pcs)
1 x Screw M3x16 (10 pcs)
1 x Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x Turnbuckle M2x29/43 (2pcs)
1 x Screw M3x20 (10 pcs)
1 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Kwik link AL M4 con Clip (2 pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x Screw M2x6 (10 pcs)
1 x Wire easy tensioner (silver)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Nut for mounting M4 (4 pcs)
1 x Blind nut M8 (10 pcs)
1 x Turnbuckle M1,6x20/30 (2pcs)
1 x Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x Hexagonal Nut M1,6 (10 pcs)
1 x Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x Threaded coupler M2,5 (10 pcs)
1 x Nylon Screw M6x40
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Futaba Female 40 cm extension
1 x ABS angle 10,0x10,0x1000 mm
1 x PARAGON Trainer 46-55 1580 mm
1,554.48EUR
Manufacturers
Languages
Español English
Currencies