Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

VSpeak ECU converter KingTech
79.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	DYNAMOMETER S-1580
1 x	Optical RPM Sensor
1 x	Oracover Brown 2 m
1 x	Oracover Yellow CADMIO 10 m
1 x	Oracover Black 2 m
2 x	ORACOVER Ferrari red (2 m)
1 x	Oracover Orange 2 m
1 x	MYLAR film A350 (1000x500 mm)
1 x	Oracover White 2 m
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Ply-Span 450x600/13g Blue
2 x	Ply-Span 450x600/13g Orange
1 x	Ply-Span 450x600/13g Yellow
1 x	Oratex Antik 2m
1 x	Oratex Red Fokker 10 m
1 x	Oracover Yellow CUB 2 m
1 x	Oracover Azul 2 m
1 x	Oracover Azul Cielo 2 m
1 x	Monokote ROJO misil (1.8x0.65m)
1 x	Oratex Silver 2m
1 x	Ply-Span 450x600/13g Black
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Small pinned hinge (12 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Flap hinge (6 pcs)
2 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Micro flex hinge (12 uds)
1 x	Long pinned hinge (6 uds)
1 x	Miniature brass strap hinge, 1 m
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	25 mm reinforced hinge
1 x	Extension silicon 75 cm (Futaba)
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	White smoke bombs AX-60 (5 pcs)
1 x	T-Hose connector 2-2-2 mm
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
2 x	Y-Hose connector 2-2-2 mm
2 x	Servo arm with 6 mm hole to FEMA 9800A
2 x	Wheel cover holder Ø 6 mm (2 uds)
1 x	Mini neumatic retract 4 mm landing gear (Het-rc)
2 x	40 mm air cylinder
3 x	Quick hose connector 3-3 mm
1 x	Landing gear strap large (4 uds)
1 x	Kit hydraulic brake
2 x	T-Hose connector 3-3-3 mm
1 x	Tailwheel for 1-3 kg models
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Tailwheel for 60/120 size
1 x	Tren de cola carbono 50-70cc
1 x	Support conector MPX (6 pcs)
1 x	White aluminium 230 mm landing gear
1 x	Soporte grifo FESTO (2 pcs)
1 x	Support Pitot JETI
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	PVC termo-retract battery 45 mm black transparent (1 m)
1 x	PVC termo-retract battery 45 mm transparent orange (1 m)
1 x	Ply-Span 450x600/13g Red
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x	Starter EM Gear Power 80
1 x	Adaptadores carga 6s JST-XH
1 x	Kavan Car 25% nitro 1l
1 x	Glow Plug Clip 1.3 Ah
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Wheel cover holder Ø 4 mm (2 uds)
1 x	2.3 mm Adapter for 30 mm spinners
2 x	6 mm Prop Adapter M8
1 x	Polyurethan FESTO hose 3x0,5 mm, transparent
1 x	Brake for 140 mm wheels
2 x	Wheel cover holder Ø 3 mm (2 uds)
1 x	Quick hose connector 6-6 mm
1 x	Quick hose connector 3-3 mm
1 x	T-Hose connector 4-4-4mm
1 x	Wheel collar 4 mm Ø (4 uds)
1 x	Racor "Y" 3 mm
1 x	Servo arm with 5 mm hole to FEMA 9810A
2 x	T-Hose connector 3-3-3 mm
1 x	Racor 3/3 mm
1 x	Y-Hose connector 3-3-3 mm
1 x	Z-shaped servo mount
1 x	Wheel cover holder Ø 5 mm (2 uds)
1 x	Nylon threaded block M5 (2 uds)
1 x	Racor 4/6 mm
1 x	Racor 4/3 mm
1 x	Y-Hose connector 4-4-4mm
1 x	Racor 4/4 mm
2 x	Nylon threaded block M4 (2 uds)
2 x	Y-Hose connector 6-6-6 mm
1 x	Tap FESTO 4-4 mm
1 x	T-Hose connector 6-6-6 mm
1 x	Tap FESTO 6-6 mm
1 x	Nylon gear block Ø 6 mm (2 uds)
1 x	3 mm Prop Adapter M6
1 x	2,3 mm Prop Adapter M6
1 x	4 mm Prop Adapter M6
2 x	3,2 mm Prop Adapter M6
1 x	Propeller 11x4,7 SlowFlyer
1 x	Propeller 10x4,7 SlowFlyer
1 x	Propeller 9x4,7 SlowFlyer
1 x	20x15 Falcon electric V2
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Round flex hinge (12 uds)
1 x	Small flex hinge (12 uds)
1 x	3.2 mm Prop Adapter M6
1 x	10x7 tree blades propeller
1 x	3.2 mm Prop Adapter M8
1 x	50 mm white plastic spinner for folding propeller
1 x	50 mm white plastic spinner for fixed propeller
2 x	Quick hose connector 4-4 mm
1 x	Festo Adaptor Tygon Large/4mm
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Neumatic retractable landing gear (Aero-Naut)
1 x	Landing gear clamp for Ø 3 mm (4 uds)
1 x	Air pressure gauge
1 x	3,2 mm Prop Adapter M6
1 x	1000 ml sealer (DOPE)
1 x	45 mm white plastic spinner for folding propeller
1 x	45 mm white plastic spinner for fixed propeller
1 x	5 mm Prop Adapter CN-Spinner
1 x	Tirpiz Battleship 1:200
1 x	Dumper propeller 6/8 mm
1 x	Prop Shaft Adapter 8 mm/M12 "long"
1 x	Body for landing gear Ø 3 mm
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Extension silicon 75 cm (Graupner)
1 x	Festo 6mm Tubing Holder (10 uds)
1 x	Faucet FESTO
1 x	Nylon gear block Ø 3 mm (2 uds)
1 x	Angled clevis with threaded rod M3

3,891.55EUR