Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501022

4.47EUR

CA Glue (medium) 20g
[R1501022]

CA Glue (medium) is a medium viscosity cyanoacrylate adhesive, suitable for bonding applications that require a larger gap fill.
Its medium cure speed and medium viscosity makes CA Glue (medium) suitable for a lot of industrial applications.
Single-component
Transparent
Solvent-free
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock	Propeller MENZ-S 23x8 temporarily out of stock	Sparkplug NGK CM6 temporarily out of stock
TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	XT-60 connector (female) temporarily out of stock	XT-60 connector (male) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	LA500 pilot-seat set
1 x	LA500 nose
1 x	Pilot LA 500
1 x	Rotorhead pushrod
1 x	Blade holder center GFK 0,5 mm
1 x	Blades 330mm
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Blade Holder Full (4 blades)
1 x	Tail tube RAINBOW
1 x	Spikes Band (5 m)
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	B4-0 rocket charges (6 pcs)
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	Ball link M1.6 (6 uds)
1 x	Gold antispark 4 mm plug
1 x	TS832 to Gopro AV/Power Cable
1 x	P 17×5.8 Prop-2PCS/PAIR
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	SE Ring 240 mm (2 pcs)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	2 LiPo XH>EH adapter
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Socket head long ball link M3 (2 uds)
2 x	Blue smoke canister 100 g
1 x	Parachute expulsion foam
2 x	CC 05
1 x	Ball link M3 RPA's-UAV's
1 x	Oracover Orange 2 m
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Straightened threaded rod M2-1m
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	Vasa model Catapult
1 x	Oracover light Grey 2m
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Cabel charger transmitter GRAUPNER
1 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	TP/TopFuel - XH 2/3S Adapter
1 x
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Tape GFK 50 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Pilot "Adolf" Legends Series (Slimline)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Ply-Span 450x600/13g White
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Soporte filtro FESTO (4 pcs)
1 x	Ball link M3 (6 uds)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Spannlack 1000 ml
1 x	Raer wall
1 x	82 mm 12 mm axi 30 g F3A CF drilled spinner
1 x	89 mm INO spinner (carbon imitation)
1 x	F3A carbon 75 mm spinner for Hacker C-50
1 x	Spinner Alumin. fixed propeller 50 mm / 5,0 mm
1 x	Male connector JST SH 1.0mm with 10 cm wire
1 x	Extension 5 lipos JST - JST/C
1 x	3 LiPo XH>EH adapter
1 x	30 cm BEC cable (male)
1 x	Spinner INOVA 63 mm White
1 x	Spinner Alumin. fixed propeller 50 mm / 6,0 mm
1 x	Spinner INO 57 mm Chrome (Imitacion metal)
1 x	51 mm white plastic spinner for fixed propeller / 4,0 mm axi
1 x	Cono NUT 5/16"x 24 -M4
1 x	75 mm INO spinner (carbon imitation)
1 x	Spinner INO 51 mm Chrome (Imitacion metal)
1 x	Spinner Alumin. fixed propeller 45 mm / 3,2 mm
1 x	70 mm INO spinner (carbon imitation)
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	Spinner INO 89 mm Chrome (Imitacion metal)
1 x	Spinner Alumin. fixed propeller 50 mm / 4,0 mm
1 x	Spinner Alumin. fixed propeller 45 mm / 6,0 mm
1 x	Spinner INOVA 45 mm White
1 x	Yellow smoke canister 65 g
1 x	Set Altimeter SHRead
1 x	"M" set
1 x	F3A carbon 85 mm spinner for AXI
1 x	Absorver mount set for 5-10 Kg models
1 x	USB interface ALTIS
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Telemetry interface ALTIS 20 cm
1 x	Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th

2,023.49EUR