Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Transmitter FUTABA T26SZ + R7214SB
1,079.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Spikes Band (5 m)
1 x
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring 360 mm (2 pcs)
1 x	SE Ring 300 mm (2 pcs)
3 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 330 mm (4 pcs)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Foil for sticking flaps and ailerons
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Cinta Goldfix 1m
1 x	Tape GFK 50 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	MPX Sub-D Adaptor
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Cable with accesories
1 x	Horn 5/15 with M2 Bearing
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
2 x	Horn 5/10 with M2 Bearing
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	SlowFlyer control horn (3 pcs)
2 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Brass control horn M4 short for wire (4 pcs)
3 x	Horn 6/20 with M3 Bearing
2 x	Brass control horn M4 short for wire (10pcs)
1 x	Horn with ball 40x30
2 x	LH long aluminium horn L31xH30 (2pcs)
2 x	Threaded coupler ALU M3 Ø 4 (2 uds)
2 x	Horn with ball 55x40
2 x	RH long aluminium horn (2pcs)
2 x	Horn 6/35 with M3 Bearing
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Small aluminium horn gold (2pcs)
1 x	Vasa model Catapult
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Short ball link M1.6 (6 uds)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Ferrita 14x8x5.5 mm
1 x	1/4 Pilot "Heidi"
1 x	Red smoke canister 65 g
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Flat washer 2.7 mm (20 uds)pcs)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Z Bender - S Type Tool
1 x	SE Ring 250 mm (2 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Ventus 1:4 set of instruments
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Horn mando long (2 pcs)
2 x	Horn mando small (2 pcs)
1 x	Rudder forward 80x28 "type Kato"
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Yellow smoke canister 65 g
1 x	Interface Realflight Simulator
2 x	Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x	PERMAGRIT Sanding Block 45° 140x51 mm
2 x	Heli blades angle measurer
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	Cockpit aluminium closing
1 x	Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm)
1 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	Charger ISDT 608AC 200W
1 x	Extra long horn 60x30
2 x	Micro control horn T2 Ø 1
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	5 mm M2 variable inclined horn
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	Brass control horn M2 long for wire (10pcs)
1 x	6 mm M3 variable horn
1 x	Horn DUBRO 1/2A
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
2 x	Rubber profile 6-2 mm 2M
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS half cane 4x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Profile ABS Square 4 x 1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	30 mm gas motor standoff
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	10 mm floating pad (72 pcs)
1 x	Horns indoor
1 x	DPSI Micro - RCS RV
1 x	Adjustable brass horn threaded M3
1 x	JIVE 80+LV Esc
1 x	KIRA 400-39 5,2:1
1 x	KIRA 600-16
1 x	DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV)
1 x	KIRA 480-43 5,2:1
1 x	KIRA 400-34
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	6 mm M3 variable inclined horn
1 x	DPSI RV Mini 5 (2008)
1 x	wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x	Magnetic Connect locking system
1 x	DPSI RV Mini 6 Magic
2 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	EWC3 100 cm wing connector
1 x	Micro control horn (2 pcs)
1 x	DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x	Support Pitot JETI
1 x	Soporte filtro FESTO (4 pcs)
1 x	NoNa BB wheel Ø130x40mm in pair
1 x	Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	DLE Ignition unit
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	EDF Jet-Flex 80 - 8 Kg
1 x	Propeller diller for DLE170
1 x	Pistola termica MH 550 micro
1 x	EDGE 540 1.73m SEAGULL Model
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Quadcopter Q50 Kit Carbon Fiber
1 x	E-FUN BUG (ROI-Import)
1 x	Crystal Universal RX 35.030 Ch 63
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	3 mm Long Prop Adapter M5
1 x	Short adjustable control horn 3x24
1 x	Esc KOSMIK 200 HV
1 x	Esc KOSMIK 160+ HV COOL
1 x	Adapter FUN 400/480
1 x	Esc KOSMIK 210 HV-I COOL
1 x	JIVE 120+HV Esc
1 x	Adapter SPEED 480 whit axle short
1 x	4,8x1000 mm 2:1 black termoretract tube
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	5 LiPo XH>EH adapter
1 x	19 mm 2:1 black termoretract tube
1 x	Cable control set
1 x	Epoxy SLOW-CURE™ 30 min (260g)
1 x	PowerFuel RX V2 Fuel Pump
1 x	10-15mm Servo Arm HITEC
2 x	10-15mm Servo Arm
1 x	Battery EMCOTEC LiIon 3000 7.2v
2 x	20-25mm Servo Arm
1 x	Crystal Universal RX 35.070 Ch 67
1 x	Heli digital angle measurer
1 x	Crystal Universal RX 35.040 Ch 64
1 x	KS86 S-6 muffler up to 65cc
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Mold plugs XT-90
1 x	Fuel tank 1500ml (50oz)
1 x	MPX 8 pins plug mold
1 x	Mold plugs XT-30
1 x	Crystal Universal RX 35.150 Ch 75
1 x	Fresa corte diamante Ø 2.7mm (bola)
1 x	Propeller diller 5/6,3/8/9
1 x	Mini Infrared Thermomiter
1 x	RCEXL Electronic ignition twin CM-6
1 x	Copier 2x20 cm pcs
1 x	Crystal Universal RX 35.090 Ch 69
1 x	Propeller diller for DA50, DLE55 red
1 x	DYNAMOMETER S-1580
1 x	Propeller drill jig DA-35/50/60/70
1 x	Crystal Universal RX 35.050 Ch 65
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Propeller diller for EME35 and DLE35
1 x	Kwik link unmount tool
1 x	Handle for PERMAGRIT lime
1 x	Crystal Universal RX 35.020 Ch 62
1 x	KS86 V muffler up to 65cc
1 x	Heat Seal Iron
1 x	Crystal Universal RX 35.170 Ch 77
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Propeller diller for DLE111 and DA85-150
1 x	Heli blades angle measurer
1 x	Spinner plastic 63 mm Red 2Bl
1 x	Tank gas KUZA 500 cc
1 x	PROXXON - SAW BLADE (50MM - 20T) (28017)
1 x	Crystal Universal RX 35.140 Ch 74
1 x	Hot Glue Stick BLACK
1 x	Encendido CDI RCAME 1/4*32 Single 120º
1 x	Cono NUT 5/16"x 24 -M4
1 x	Tube bender
1 x	1000 cc gasoline fuel tank complet
1 x	Copier 5x20 cm pcs
1 x	Propeller drill jig DA 100/85/120/150/200 and VM 60-210
1 x	2 mm male connector (2 pcs) with safety connector
1 x	Allen wheel collar M3x3
1 x	Adapter 3,0 mm M8
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Long adjustable control horn with bearing
1 x	Small aluminium horn blue (2pcs)
1 x	6 mm aluminium horn with patella
1 x	ABS angle 5,0x5,0x1000 mm
2 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	ABS angle 1.5x1.5x1000 mm

11,227.91EUR