93.00EUR

DUPLEX 2.4 EX MVario2
[HK80001317]


MVARIO2 is a system that measures atmospheric pressure and using the obtained data it calculates the altitude above the sea level, the speed, and the rate of climb as well as the rate of descent. Further on the extreme data (minimal and maximal values) are recorded, the change on climb and descent is signaled, and the sensor also alerts if the alarm setting is exceeded.
The data of the sensor are transmitted via the Duplex system to the user.
The Duplex system takes advantage of the 2,4GHz band for communication, which does not only transmit model control data to the model, but is also sends the data from the model back to the transmitter. The telemetric data gained during the operation are shown as actual measured values in real time on the LCD screen of the JETIBOX or on the DC/DS JETI model transmitters.

Main features:
- Measurement of altitude, pressure, and temperature.
- Very accurate and fast indication of climb and descent.
- Possibility of sound alarm signalization using Tx module or JETIBOX profi.
- Possibility to be used as Expander and to connect other sensors.
- Adjustable compensation of energy (TEK) via MSPEED EX sensor.
- Possibility to be used as an altitude switch in FAI F5J or ALES competition categories.
- The device is compatible with EX Bus protocol, i.e. it is possible to be configured comfortably via a special menu in DC/DS JETI model transmitters.
- Firmware updates.

Technical data
- Dimensions: 35x16x7 mm
- Weight with the cables: 5 g
- Measuring accuracy of absolute/relative altitude: ±9 m/±3 m
- Resolution of measured height: 0.1m
- Typical noise ratio in height changes measurement: ±0.05 m/s
- Measurement range: 450 - 1100 hPa
- Operating temperature: -10 - 85 °C
- Supply voltage: 3.5 - 8.4 V
- Current consumption: 15 mA



temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Receiver DUPLEX R9 EX 2.4 GHz
Receiver DUPLEX R9 EX 2.4 GHz

temporarily out of stock
temporarily out of stock

DUPLEX R14 receiver 2,4GHz
DUPLEX R14 receiver 2,4GHz

temporarily out of stock
temporarily out of stock

DUPLEX R7 REX receiver 2,4GHz
DUPLEX R7 REX receiver 2,4GHz

temporarily out of stock
temporarily out of stock

DUPLEX USBa USB-Adapter for Jeti Duplex Items
DUPLEX USBa USB-Adapter for Jeti Duplex Items

temporarily out of stock
temporarily out of stock

Jeti Advance Pro Program Card
Jeti Advance Pro Program Card

temporarily out of stock
temporarily out of stock

Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX
Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
    2,4 GHz antenna exit guides
    Transmitters accesories
    Transmiters->
    Receivers->
      Acc/ Telemetria Jeti
      Compatible
      FUTABA
      Graupner
      Hacker
      Hitec
      Jeti
      Mikado
      Multiplex
      PowerBox CORE
      RadioLink
      RCM Pelikan
      Schulze->
    2,4GHz Modules->
    Crystals->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x DYNAMOMETER S-1580
2 x Optical RPM Sensor
1 x Brass rod Ø 1.0 mm x 1000 mm
2 x Straightened rod Ø 3.0 mm x 1000 mm
1 x Straightened threaded rod M2-1m
2 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x Straightened threaded rod M3 - 1m
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
2 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
2 x Cap Hispano Aviación
2 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
2 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x SlowFlyer control horn (3 pcs)
2 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
2 x Softshell Hispano Aviación
1 x Cable with accesories
1 x Brass control horn M4 short for wire (4 pcs)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
2 x Horn 13,5x16 mm (2 pcs)
2 x Threaded coupler ALU M3 Ø 4 (2 uds)
2 x Horn 16,5x20 mm (2 pcs)
1 x Horn 6/20 with M3 Bearing
1 x LH long aluminium horn L31xH30 (2pcs)
2 x Small aluminium horn blue (2pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x 6 mm aluminium horn with patella
1 x Horn 5/15 with M2 Bearing
1 x Horn 6/27 with M3 Bearing
1 x Horn for flap control (1 pcs)
1 x Small aluminium horn red (2pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x RH long aluminium horn (2pcs)
1 x 20 mm carbon horn
1 x Brass control horn M2 short for wire (2 pcs)
2 x Small aluminium horn gold (2pcs)
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Vest clothes Hispano Aviación
1 x Horn 6/35 with M3 Bearing
1 x Horn with ball 40x30
1 x Shirt Hispano Aviación
1 x Cabel charger transmitter GRAUPNER
4 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x CC 02
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x CM-3
2 x TP/TopFuel - XH 2/3S Adapter
2 x 30 cm BEC cable (female)
2 x Dean "T" - Futaba Adapter
1 x CC 03
1 x Adapter lead MPX/XT60
1 x JETImodel SINGLE BEC
2 x 4 LiPo XH>EH adapter
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x BEC 3A FOXY
1 x 30 cm BEC cable (male)
1 x Bec MR UBEC 5A (5v/6v/7v)
2 x USB HLS prog. interface
3 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x XH male balance (2S) connector (2 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x ABS tube 14.0x10.0x1000 mm
2 x Interface Jack Adapter IKARUS
1 x Oratex Natural White 2m
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Autogyro Cierva C30 Spain
1 x Motor rotor LA-500
1 x LA500 housing-lower cyclic
1 x Straightened rod Ø 1.0 mm x 1000 mm
2 x Nut M1,6
1 x Wheel keeper washer
2 x Ball joint long
1 x Screws flush mount M2
2 x Side Plate
2 x Nut M2
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Interruptor SAFET-SWITCH 12HV Twinbatt
1 x CC 05
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x USB Mini Camera endoscope
1 x 160 mm carbon undercarriage (2pcs)
2 x GameCommander USB Universal
1 x Legs + electric brakes for Viper Jet 90
2 x Legs + electric brakes for Viper Jet 1700 mm
1 x Slave-cable USB Easy Sim
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x ABS angle 6,0x6,0x1000 mm
1 x 800TVL CMOS camera for FPV
1 x Nose leg 155 mm with wheels 70 mm
1 x Micro control horn T2 Ø 1
1 x Brass control horn M2 long for wire (10pcs)
1 x TrainerCord (master-learner)
1 x Connector Sub-D 2+5 Female
1 x Long Switch On/Off micro
1 x Male connector for 6 pines AWG
1 x Brass control horn M2 large for wire (2pcs)
1 x EWC3 40 cm wing connector
1 x Adapter lead MPX/EC3
1 x 3 LiPo XH>EH adapter
1 x Medium extra-strong control horn with bearing 2,8x24
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Male connector for 12 pines AWG
1 x 2 LiPo XH>EH adapter
1 x PSC 5
1 x Long adjustable control horn 3x34
1 x Electronic switch JETI SP6 0-15v/6A
1 x Prolonguer for Balancer Thunder Power 6S
1 x Steel Screw M1x8 (10 pcs)
2 x Blade holder center
2 x Head core
1 x Tail boom
2 x Screws M1,6x6 Allen
1 x Blade holder upper
1 x Tail support (2 pcs)
1 x Head upper part
1 x Steering lever
1 x Rotorhead pushrod
1 x Rotor Mast
1 x Rotorshape Elevator
1 x Rudder
1 x Balls 4 mm
1 x Profile ABS half cane 7.0x1000 mm
1 x Micro control horn (2 pcs)
1 x Horn mando long (2 pcs)
1 x Long adjustable aluminium control horn 2,8x24
1 x Indoor hinge with servo arm integraded
1 x 8Wx2 Navigation & Strobe, 11mm Green/White
1 x Small adjustable aluminium control horn with bearing 2,8x15
1 x Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x Blades 330mm
2 x Interface Realflight Simulator
1 x Blade holder lower
1 x RF9 Flight Simulator with Spektrum Controller
1 x Long horn 50x26
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x Adjustable brass horn threaded M3
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x Small control horn with bearing (2 pcs)
1 x Brass control horn M4 long for wire (4 pcs)
1 x Long adjustable control horn with bearing
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x 8Wx2 Navigation & Strobe, 11mm, T-Fuse Red/White
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x Horn DU-BRO 1/2 (2 pcs)
1 x 16mm Gear-Spotlight, 4W
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x Rudder forward 70x28 "type Kato"
1 x CC 01
1 x Male/Female prolonguer for Balancer Thunder Power 6S
4,846.18EUR
Manufacturers
Manufacturer Info
Jeti
Jeti Homepage
Other products
Languages
Español English
Currencies