59.00EUR

Glases Innovation Plus
[CMINNOVATIONP]



Set de gafas, cristales, funda y trapo
Do you have to wear prescription glasses? Fed up with seeing your buddies turn up at the field with great looking and practical glasses you just can't wear? We have the answer in the form of these stylish prescription model flying sunglasses, which have been especially developed for radio control model use.

At the heart of the design is a polycarbonate frame that houses your prescription lenses; this clips onto a main frame, which in turn houses the coloured shades that simply clip on to a hinged section. These hinges allow you to temporarily turn up the outer lenses in order to closely inspect a model in the pits etc.

Innovation Plus are polarised sunglasses. The polarised cristals greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

The de-centred, scratch resistant lenses have been optically balanced to negate the effects their curvature would otherwise have on your vision. Conforming to US ANSI Z80.3 plus British and European safety standard EN1836, our sunglasses are factory impact-tested, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the CE (European Union standard) compliance mark. The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2) average sunlight; smoked mirror (category 3) bright sunlight; dark smoked (category 4), very bright conditions.

The glasses come with the interchangeable lenses, a cleaning cloth and a superb carry case with belt clip. All frames and the carry case display our 'Model Glasses' logo.

WILL THEY WORK FOR ME? - If you have a prescription (SPH) requirement that's less than plus or minus 4.00, our glasses will work just fine for you. Stronger prescriptions can cause distortion, due to the curvature of the tinted lenses when placed in front of the flat prescription clip. The de-centring calibration loses its effect where stronger prescriptions are required. If you have a requirement greater than plus or minus 4, please do not buy these glasses. Bi-focals, varifocals and prismatic lenses can be added - if in doubt, please consult your optician for advice.

IMPORTANT NOTE
When wearing Innovation Plus, some users may find they cannot see certain types of LCD or other electronic / digital transmitter displays. This is a normal cause of wearing polarised glasses. We recommend using the glasses with the front section flipped up, or the glasses removed, when model trimming prior to use.


few units
few units

Reviews

Customers who bought this product also purchased
Tape GFK 50 mm
Tape GFK 50 mm

few units
few units

Tape GFK 25 mm
Tape GFK 25 mm

few units
few units

MAX BEC
MAX BEC

few units
few units

Fiberglass plate 350x150x0.5 mm
Fiberglass plate 350x150x0.5 mm

few units
few units

Connectors DEANS (T)
Connectors DEANS (T)

few units
few units

Conector FUTABA Servo male  (10 pcs)
Conector FUTABA Servo male (10 pcs)

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
2 x ABS tube 3.0x2.0x330 mm
1 x ABS tube 3.0x2.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x ABS tube 4.0x2.0x1000 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x ABS tube 16.0x14.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 5.0x4.0x156 mm
1 x ABS tube 5.0x3.0x1000 mm
2 x ABS tube 12.0x10.0x1000 mm
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x ABS tube 18.0x16.0x1000 mm
1 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 20.0x18.0x1000 mm
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 6.0x4.0x1000 mm
1 x ABS tube 9.0x8.0x1000 mm
1 x Small aluminium horn red (2pcs)
1 x Horn 6/35 with M3 Bearing
1 x Horn 16,5x20 mm (2 pcs)
1 x Horn with ball 40x30
1 x Horn 5/10 with M2 Bearing
1 x Horn 6/27 with M3 Bearing
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
2 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
2 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Release wax 250ml
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x Vacuum bag, 1200 mm x 50 m
1 x CA Glue (medium) 20g
1 x Foaming agent for epoxy resins 200 g
2 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Hardener Aero EPH 161 (250 g)
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x CA Glue fast 20g
1 x Pilot "Goose" (Slimline)
1 x 800TVL CMOS camera for FPV
1 x Paint gun for sprays
1 x L-Connector 4.0 mm x 1000 mm
1 x Aramid 50 daN 50 m
1 x 5 LiPo XH>EH adapter
1 x SIMtransmitter 6 Mode 2
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Soporte grifo FESTO vertical (1 pcs)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x ABS tube 10.0x8.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x ABS tube 4.0x3.0x1000 mm
2 x Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
2 x ABS tube 2.0x1.0x1000 mm
3 x Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
2 x Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
2 x Motor OS 3820-1200 electric
1 x Film release agent PVA 25 ml
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x SBEC 30 D
1 x Short Switch On/Off micro
1 x MAX BEC 2
1 x 
1 x SE Ring 400 mm (2 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x 4 blades set
1 x Aluminun wheel collar 3 mm Ø (4 uds)
1 x 45 mm rods + T patellas set for direction control
1 x Clip mini fixing for wing (2 pcs)
1 x Canopy Lock V1 M3 Red (2 pcs)
1 x 100 mm rods + T patellas set for direction control
1 x 250 mm / 16 mm Airbrakes
1 x Clip fixing for wing (2 pcs)
1 x Cabin latch Fox MDM1 4m (pair)
1 x Epoxy Resin L + Hardener GL2, kit/ 930 g
2 x Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Epoxy 10 min 190g
2 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x 
2 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey)
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x Sukhoi 29S 2,6 m White/Blue (SebART)
1 x Sukhoi 29S 2,6 m,CF landing gear(SebART)
2 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
2 x Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
2 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x A60 Motor Mount Alu complete set
1 x Size "M" motor holder for class 400
1 x Ø 38 mm fiberglass motor-holder for electric motors
1 x Central support Speed 600
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x Sebart 2.2 m YELLOW/BLACK (SebART)
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Sebart 2.2 m WHITE/BLUE (SebART)
2 x Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x SLICK 360-A 104" (2640 mm)
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x A50 Motor Mount Alu complete set
1 x Receiver bed (Blue)
1 x 10 mm gas motor standoff
1 x Cables suitable for the motor AC 28/7
1 x Propeller RF CFK 13x7
1 x Propeller CFK 15.5x10
1 x Propeller CFK 18,5x12
1 x Propeller CFK 12.75x13
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Landing gear frontal support 25x32x16
1 x SUS wire 3m (nylon coated)
1 x Allen wheel collar M4x6
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs)
1 x M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs)
1 x 3 blades set
1 x Tip wing protector 40x14 (2 pcs)
1 x Pushrod octagone 4/3
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x Glass fabric 49 g/m² (1,27 x 5 m)
1 x Glass fabric 160 g/m² (Twill weave) 100 cm x 5m
1 x Propeller CFK 15x16
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x Propeller CFK 14x8 Slim
13,277.66EUR
Manufacturers
Languages
Español English
Currencies