800.00EUR

Motor DLE 120 cc
[ROIDLE120]


Twin-cylinder power and efficiency

The DLE-120 delivers 50 pounds of static thrust—more than enough power for intense 3D maneuvers. Twin opposed cylinders reduce vibration and engine wear and increase performance.

Mufflers, standoffs and electronic ignition boost performance even further. The DLE-120 delivers the most punch at the lowest weight and the lowest price of any engine in its class. Pick up the DLE-120 and fly with performance-fueled confidence.

Features:
•Efficient, light design for a high power-to-weight ratio
•Light pistons for fast acceleration, excellent compression and low vibration
•CNC-machined parts for high performance and long life
•Sealed crankshaft bearings
•Improved piston and cylinder contact area for increased engine lifespan.
•Matched mufflers included for optimized power
•Two mufflers
•Electronic ignition module with spark plugs
•Standoffs
•Spiral wire wrap

Specifications:
Displacement: 120.0 cc (7.3 cu in)
Bore: 1.85 in (47 mm)
Stroke: 1.38 in (35 mm)
Total Weight: 6.13 lb (2781 g)
Output: 12 hp @ 7,500 rpm
Includes: Electronic ignition module, muffler, spark plug, standoffs, spiral wire wrap, connector safety clips.
Requires: unleaded gasoline, 2-cycle oil, ignition battery & propeller
Suggested Propellers: 26 x 10, 26 x 12, 27 x 10, 28 x 10

DLE-120 Technical Data:
Ignition Battery: 4.8-8.4 NiCd or NiMH, 6.6V LiFe or 2S LiPo pack
Gas/Oil Mix: 30:1
Replacement Spark Plug: DLEG1326
Static Thrust: 20.9 lb (9.5 kg) @ 328 feet altitude, 18.7 lb (8.5 kg) @ 1,800 feet altitude
Weight Breakdown: Engine: 5.08 lb (2306 g), Muffler 1: 3.6 oz (103 g), Muffler 2: 3.9 oz (111 g), Ignition Module: 5.3 oz (149 g); Miscellaneous: 4 oz (112 g)


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cable control set
1 x Horn 13,5x16 mm (2 pcs)
1 x Horn with ball 40x30
2 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Brass control horn M4 short for wire (10pcs)
1 x Horn for flap control (1 pcs)
1 x 6 mm red aluminium threaded horn with patella
1 x Cable with accesories
1 x Horn 5/20 with M2 Bearing
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Small aluminium horn blue (2pcs)
1 x RH long aluminium horn (2pcs)
1 x Extinguisher CO2 - 2 Kg
1 x SlowFlyer control horn (3 pcs)
2 x Horn 5/10 with M2 Bearing
2 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x Extension 7.5 cm
1 x Extension lead 15 cm Multiplex
1 x Extension silicon 30 cm female (Futaba)
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
3 x Extension 90 cm (Futaba)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Extension 100 cm (Futaba)
2 x Futaba male 40 cm extension
1 x Premium servo extension 50cm
1 x Optical RPM Sensor
2 x DYNAMOMETER S-1580
1 x 20 g tin paste
1 x 500 ml sealer (DOPE)
1 x Spray YELLOW Inca Lexan 150ml
1 x Solvent Plasti Dip 1000 ml
1 x Painting GHT Lexan Black 150 ml
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Spray adhesive INFUTAC (Clear) 500 ml
2 x Spray Graphit 33
1 x Paint gun for sprays
1 x Release wax 250ml
1 x Partall paste 650 g
2 x Universal Colour Paste white 50 g
1 x Hobbylite Filler, Balsa colour
1 x Nitroverdu 500 ml
1 x 
1 x Plasti Dip Liquid Tape 429 ml black
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Plasti Dip Liquid Tape 429 ml black
1 x CC 03
2 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x TrainerCord (master-learner)
1 x CC 02
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x 3 LiPo XH>EH adapter
2 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
2 x BEC 3A FOXY
1 x Circlick securite
1 x JETImodel SINGLE BEC
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x 2 LiPo XH>EH adapter
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x ABS tube 4.0x3.0x1000 mm
1 x Ballast 700gr OPALE
1 x Short ball link M2 (6 uds)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Propeller balancer
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Support conector MPX (6 pcs)
1 x Angle support XT60 conector
1 x Mini neumatic retract 3 mm landing gear (Het-rc)
1 x PRO-HV Dual Action Valve
1 x Neumatic retractable landing gear (Aero-Naut)
2 x Horn DUBRO 1/2A
1 x Horn micro type4 Ø 0,5 (2 pcs)
1 x Micro control horn (2 pcs)
1 x Extra long horn 60x30
1 x Brass control horn M4 long for wire (4 pcs)
1 x Long horn 50x26
1 x Horns indoor
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x Adjustable brass horn threaded M3
1 x TP/TopFuel - XH 2/3S Adapter
1 x Brass control horn M2 long for wire (10pcs)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x 6 mm aluminium horn with patella
1 x 200 mm extensión servo HITEC/JR
1 x Extension silicon 50 cm (Graupner)
1 x Extension silicon 10 cm (Graupner)
1 x LA500 Autogyro
1 x Extension silicon 50 cm (Futaba)
2 x Circlick securite
2 x Extension silicon 35 cm (Futaba)
1 x Extension 30 cm (Futaba)
1 x Landing gear axle Ø 6 mm (2 uds)
1 x Extension PVC 150 cm (Graupner)
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x Screwdriver for Hexagon 1,27mm
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 
1 x SE Ring 480 mm (2 pcs)
1 x SE Ring 350 mm (2 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
2 x PSC 5
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x Switc electronic 30 Amp
2 x 30 cm BEC cable (male)
1 x MPX-Dean "T" Adapter
1 x SPARK Switch 12v
1 x MAX BEC 2
1 x PowerBox SparkSwitch RS
1 x Digital scale up to 40 kg
1 x Motor B20-10 L + 4:1 gearbox
1 x 4 mm Prop Adapter M6
1 x Blade holder center
1 x Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m
1 x Set montaje amortiguador para modelos 8-16 Kg
1 x Epoxy SLOW-CURE™ 30 min (260g)
1 x Ball Bearing Oil 25 ml
3,970.94EUR
Manufacturers
Manufacturer Info
DLE Engines
Other products
Languages
Español English
Currencies