1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x 5 LiPo XH>EH adapter
2 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Double conector with JR adapter and 200 mm extension
2 x 3 LiPo XH>EH adapter
2 x 2 LiPo XH>EH adapter
2 x Connector CAN 15
1 x Connector Sub-D 2+5 Female
1 x 30 cm BEC cable (male)
2 x "Y" charging 4mm wire (2 IN-1 OUT).
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x APM2.6 Power module with 5.3V DC BEC
2 x UBEC 6A KAVAN
2 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x 30 cm BEC cable (female)
1 x Circlick securite
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x CC 01
1 x BEC 3A FOXY
2 x CM-3
2 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x DPS Switch JR/JR
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
2 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Cabel charger transmitter GRAUPNER
2 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Connector Sub-D 2+5 Male
2 x 4 LiPo XH>EH adapter
3 x Multi-adapter balancer JST - TP
2 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Extension 5 lipos JST/C
2 x Servo slow down unit (0,7-14,7 sec )
1 x MAX BEC 2D plus EX
3 x PowerBox SparkSwitch RS
2 x PSC 6
2 x SBEC 30 D
3 x Multi-adapter balancer JST/C - TP
2 x Interruptor SPS 70v 60/120A
1 x Interruptor RX/Batterie
5 x PSC 5
2 x SBEC Jeti
1 x Extension 2/3 lipos JST/C
2 x SPS Remote switch actuator
2 x Prolonguer for Balancer Thunder Power 6S
1 x SPS 70V 100/200 A
1 x Pins M connect Multipin connectors AWG 20-24
1 x Male/Female prolonguer for Balancer Thunder Power 6S
2 x MAX BEC 2
1 x Extension 2/3 lipos JST - JST/C
2 x CC 05
2 x TrainerCord (master-learner)
1 x USB HLS prog. interface
1 x MPX-Dean "T" Adapter
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x Bec MR UBEC 5A (5v/6v/7v)
3 x Red copper lacquer wire Ø0,2 mm (5 m)
2 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Adapter lead MPX/EC3
1 x Adapter lead MPX/XT60
1 x Jeti Black cap
1 x Extension 5 lipos JST - JST/C
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x Round Rod 3,0x1000 mm
1 x CC 03
1 x Switc electronic 30 Amp
1 x Carbon fiber rod 14 mmx1000 mm
1 x Brass control horn M3 short for wire (2 pcs)
1 x Selfstart electronic switch
1 x Conector JR Servo female (10 pcs)
1 x Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x Y-Hose connector 4-4-4mm
1 x Short Switch On/Off micro
1 x 280 cc gasoline fuel tank complet
1 x T- Fittings blue color (2pcs)
1 x Tacometer mini ignition RCEXL
1 x Blocking screws M6 gas engine
1 x T- Fittings red color (2pcs)
1 x 1000 ccm gasoline fuel tank
1 x FESTO connector M7 Quick 6mm 90º
1 x Ball Bearings for motor A60-V2
1 x Quick hose connector 6-6 mm
1 x FESTO connector M7 Quick 4 mm
1 x 500 ccm gasoline fuel tank
1 x Fuel Fittings-Gold
1 x Support 45% Hopper JetsMunt
1 x 1000 cc gasoline fuel tank complet
2 x PWC4 wing/fuselage connector for 4 servos
2 x Filler Gauges
2 x SPARK Switch 5.9v
1 x Check valve quick hose connector 4-4 mm
1 x Propeller diller for DLE170
1 x Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5
1 x Fuel Fittings-Red
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Encendido CDI RCAME 1/4*32 Single 120º
1 x GLOW 2C + accesories
1 x DLE 30 complete electronic ignition
1 x Extension 6 lipos XH > EH
1 x wing/fuselage connector for 3 pines AWG 20-24
1 x TP/TopFuel - XH 2/3S Adapter
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
2 x Long Switch On/Off micro
1 x Switching module high voltage SXH
2 x Jet Afterburner Simulator NF-Jet3 RY
2 x NF-3XL set
2 x NF-3X-80 liner Kit
2 x NF-3 RC set
2 x Jet Afterburner Simulator NF-Jet2
1 x XH LiPo extension lead
1 x 28x5 mm wires output (2 pcs)
1 x Cable tie mounts 4.3 (4 uds)
1 x Canopy Lock V1 M3 Blue (2 pcs)
1 x 38x4,5 mm wires output (2 pcs)
1 x XH female balance (9S) connector (2 pcs)
1 x Allen wheel collar M3x3
1 x 41x5,5 mm wires output (2 pcs)
1 x Jet Afterburner Simulator NF-Jet3 RYS
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x EWC3 40 cm wing connector
1 x SBEC 40
2 x SPS 70V 140/280 A
1 x EWC6 40 cm wing connector
1 x SPARK Switch 7.4v
1 x Opto Gas Engine Kill Switch
1 x FX three-position switched channel, long
1 x BULLIT Wing 840 mm
1 x BULLIT Wing 1095 mm
1 x 65 mm mini servo cover
1 x 34 mm Alu spinner 4 mm pleg. propeller
1 x Adjustable launching hook
1 x Bidule 55 V3 2460 mm
1 x FESTO connector M7 barb fitting 4mm
1 x FESTO Blanking plug G1/8
1 x FESTO Filter 6 mm
1 x FESTO connector M7 Quick 6 mm
1 x FESTO connector M7 barb fitting XL Tygon
1 x Fuel line plugs (Silver)
1 x FESTO connector M5 Quick 4 mm
1 x Fuel line plug Large 2 pcs
1 x Foam air filter Ø 48 mm, blue
1 x NF-2 RC set
1 x Fuel dot red
1 x FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent)
1 x Tygon tube 4.8 x 3.2 mm 1m
1 x PARKMASTER PRO Kit + (RR)
1 x Support hands Issuer PROFI TX
1 x FunCup XL RR
1 x Servo Controller Fibra optica
1 x Jet Afterburner Simulator NF-Jet3 YSW
1 x Simple take for fuel tank
1 x Tygon tube 7.94 x 4.7 mm 15 m
1 x Propeller diller for DA50, DLE55 red
1 x Kerosene valve EVO Jet
1 x Propadapter for motor A50-V3
1 x DLA 116 crankshaft
1 x PROFI TX fastening rings
1 x POWER PEAK D7 EQ-BID 12V/230V-Duo Charger
1 x Power MULTIlight
1 x CHALLENGER Indoor
1 x Módulo Bluetooth
1 x MPX screwable clips (5 pcs)
1 x Jet Afterburner Simulator NF-Jet2YY Set
1 x NF-3m Heli Kit
1 x Light System
1 x Crimping tool
1 x SPARK Switch 12v
1 x USB interface ALTIS
1 x NF-3X-350 set
1 x Jet Afterburner Simulator NF-Jet1RY Set
1 x NF-1 RC set
1 x Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x 2,3 mm Prop Drive Günther M4
9,088.14EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies