Top » Catalog » Hardware » Servos » Hitec » ROIHS5585MH

70.08EUR

Servo HITEC HS-5585MH
[ROIHS5585MH]

Product Description:

Increase your performance not your budget with the high voltage, high torque, digital HS-5585MH. Featuring a high performance coreless motor, heavy-duty metal gears and dual ball bearings, the HS-5565MH is rated for 7.4 volt, 2S LiPo operation. The HS-5585MH, supplies your 1/10th monster trucks to 1/8th scale buggies and truggies and high performance airplanes up to 35 percent with outstanding strength and precision.

Features
Our Most Economically Priced High Torque Digital Coreless Servo
Quick and Precise Coreless Motor
Heavy Duty Metal Gears
7.4v 2-Cell LiPo Capability
Standard Programmable Digital Circuit

Programmable Functions
End Point Adjustments
Direction
Fail Safe
Dead Band
Speed (Slower)
Data Save / Load
Program Reset

HS-5585MH Servo Specifications
Performance Specifications
Operating Voltage Range (Volts DC) 6.0V ~ 7.4V
Speed (Second @ 60°) 0.17 ~ 0.14
Maximum Torque Range oz. / in. 194 ~ 236
Maximum Torque Range kg. / cm. 14 ~ 17
Current Draw at Idle 4 mA
No Load Operating Current Draw 300 mA
Stall Current Draw 2,700 mA
Dead Band Width 2 µs
Physical Specifications
Dimensions (Inches) 1.57 x 0.78 x 1.49
Dimensions (Metric) 39.8 x 19.8 x 37.8
Weight (Ounces) 2.10
Weight (Gram) 60.0
Circuit Type G1 Programable Digital
Motor Type Coreless Metal Brush
Gear Material Metal
Bearing Type Dual Ball Bearing
Output Shaft (type / Ømm) Standard 24
Case Material Plastic
Dust / Water Resistance N / A
Connector Gauge (AWG) / Strand Count 25 / 40

temporarily out of stock

Reviews

Customers who bought this product also purchased

Festo Adaptor Tygon Large/4mm temporarily out of stock	Tap FESTO 6-6 mm temporarily out of stock	FESTO Filter 6 mm temporarily out of stock
Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) temporarily out of stock	Quick hose connector 6-6 mm temporarily out of stock	Servo M2x7/16 screw (4 pcs) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Connector Sub-D 2+5 Male
1 x	Connector CAN 15
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	CC 02
1 x	DPS Switch JR/JR
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	UBEC 6A KAVAN
1 x	Connector Sub-D 2+5 Female
1 x	Circlick securite
1 x	Cabel charger transmitter GRAUPNER
1 x	CM-3
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Dean "T" - Futaba Adapter
1 x	CC 01
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	APM2.6 Power module with 5.3V DC BEC
1 x	CC 03
1 x	Double conector with JR adapter and 200 mm extension
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	BEC 3A FOXY
1 x	Servo slow down unit (0,7-14,7 sec )
1 x	SPS 70V 140/280 A
2 x	SBEC Jeti
1 x	RF9 Flight Simulator with Spektrum Controller
1 x	Interruptor RX/Batterie
2 x	Extension 6 lipos XH > EH
3 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Cabel "Y" 15 cm
1 x	Extension 90 cm (Futaba)
1 x	Premium servo extension 25cm
1 x	Cabel "Y" 30 cm (graupner)
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension silicon 30 cm female (Futaba)
1 x	0,14 mm PVC servo wire extension, ZH micro conector.
1 x	Extension 30 cm (Futaba)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension silicon 10 cm (Graupner)
1 x	Extension silicon 100 cm (Graupner)
1 x	Premium servo extension 100cm
1 x	Futaba male 40 cm extension
1 x	200 mm extensión servo HITEC/JR
2 x	Profile ABS Square 3 x 1000 mm
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	Cinta Goldfix 1m
1 x	T-Connector 4.0 mm x 1000 mm
2 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	U Profile ABS 5,0x10,0x1000 mm
2 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	20x200 mm battery rings
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	Flat Connector 4.0 mm x 1000 mm
1 x	Ring 320 mm length (5 pcs)
1 x	Tape GFK 50 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x	ABS angle 4,0x4,0x1000 mm
2 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	SE Ring 350 mm (2 pcs)
1 x	Profile ABS half cane 3x1000 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring 250 mm (2 pcs)
1 x	ABS "T" angle 8.0x8.0x1000 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Tape GFK 25 mm
2 x	ABS "T" angle 2.0x2.0x1000 mm
2 x	ABS angle 5,0x5,0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x
1 x	Profile ABS Square 2 x 1000 mm
1 x	L-Connector 1.5 mm x 1000 mm
2 x	SE Ring 200 mm (2 pcs)
3 x	L-Connector 4.0 mm x 1000 mm
1 x	Tape GFK 38 mm
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS tube 4.0x2.0x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	M3 Maxi ball link (2 uds)
1 x	GPS Logger Dymond
1 x	Support ECU Xicoy X-45
1 x	Support Flush MPX Conector (6 pcs)
1 x	2,4x1000 mm 2:1 green termoretract tube
1 x	3 LiPo XH>EH adapter
1 x	12,7x1000 mm 2:1 green termoretract tube
1 x	3,0x60 mm allen screwdriver
1 x	2,4x1000 mm 2:1 black termoretract tube
1 x	Carbon plate 350x150x3.0 mm
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	5 LiPo XH>EH adapter
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	2,4x1000 mm 2:1 red termoretract tube
2 x	CORTEX
1 x	Lipo SMART 5000 mAh 4s 14.8v IC5
1 x	DPSI magnetic switch actuator (housing)
1 x	MPS Gas-Cap-Powerswitch
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	MAX BEC 2D plus EX
1 x	Extension 2/3 lipos JST/C
1 x	Servo AN-20 MGBBA
1 x	Servo AN-8 HBA
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	ROBART POINT HINGE 4,7mm (5 pcs)
1 x	80 mm rods set for direction control
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Extension 5 lipos JST/C - JST
1 x	EasyFLY Addon
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
1 x	SBEC 40
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Spikes Band (5 m)
1 x	ABS rectangular profile 10x5.0x1000 mm
1 x	Rubber profile 8-2 mm 2M
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Marker ties (20 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	ALU servo arm 3 mm shaft
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	Rocket cardboard tube 50mm x 48mm x 250mm
1 x	AXI 2814/20 V2
1 x	AXI 2814/6D V2
1 x	AXI 2217/16 V2
1 x	AXI 2814/12 V2
1 x	Ø 38 mm fiberglass motor-holder for electric motors
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Medium pin type hinge (12 uds)
1 x	Rocket D3-P
1 x	Rocket cardboard tube 25mm x 24mm x 230mm
1 x	Rocket D9-7
1 x	Xplorer2 anemometro
1 x	Xplorer4 anemometro
1 x	Xplorer3 anemometro
1 x	Fiberglass motor-holder for electric motors
1 x	XPower XC3522/5 LS
1 x	Central support Speed 280
1 x	AXI 2820/14 V2
1 x	Motor mount M
1 x	AXI 2826/6 V2
1 x	Size "M" motor holder for class 400
1 x	AXI 2826/6 V2 Long
1 x	AXI 2820/12 V2
1 x	Size "L" motor holder for class 600
1 x	Bearings for motor HACKER C50
1 x	Cooler motor type 400
1 x	Motor holder AXI
1 x	Size "M" motor holder for class 600
1 x	AXI 2820/8 V2 Long
1 x	AXI 2212/26 V2
1 x	AXI 2814/10 V2
1 x	XPower XC4226/12 LS
1 x	Fiberglass motor-holder for electric motors
1 x	AXI 2814/12 V2 Long
1 x	AXI 2808/20 V2 Long
1 x	Motor XPOWER F2919/10 F5J Light
1 x	AXI 2808/16 V2
1 x	Cooler motor type 300
1 x	Motor mount for 1200 mm models
1 x	AXI 2826/8 V2 Long
1 x	AXI 2820/10 V2
1 x	AXI 2814/20 V2 Long
1 x	XPower XC5030/14 LS
1 x	Metalic motor holder for class 550-600
1 x	Radial mount for electric 2.5-5.6
1 x	Motor ORBIT 20-12 with coolingfan
1 x	Prolongador S-Bus JR/JR 10cm
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Protective Cover for wires Ø 20 mm 1000 mm
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	Ferrita 27x14x7 mm
1 x	Ferrita 17x10x6.5 mm
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	DEMON CORTEXpro
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Ferrita 14x8x5.5 mm
1 x	Extension 5 lipos JST - JST/C
1 x	ALU double servo arm 3 mm shaft
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)

6,034.66EUR