1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x DYNAMOMETER S-1580
1 x Optical RPM Sensor
1 x Tape GFK 25 mm
1 x 
1 x SE Ring 360 mm (2 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 350 mm (2 pcs)
1 x SE Ring 480 mm (2 pcs)
1 x Tape GFK 50 mm
1 x SE Ring 450 mm (2 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x SE Ring 400 mm (2 pcs)
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
2 x 20x1000 mm Ring Strap Back To Back
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Cinta Goldfix 1m
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 20x200 mm battery rings
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x SE Ring 250 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x SE Ring 300 mm (2 pcs)
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Glases Aspen
1 x Glases Ace
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
2 x Glases Nimbus
2 x Towing hook <3m
1 x LOWER TOW HOOK
1 x Strip ABS 2.0x8.0x1000 mm
2 x ABS Strip 1.5x3.0x1000 mm
2 x Paramotor Kit Camo H1.5/ Ben Red
1 x Rescue 1,8m2 / BackPack
2 x ABS Strip 1.0x3.0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x Paramotor Trike XL
1 x Para-RC Mix
2 x ABS I Strip 20x10x1000 mm
1 x Paramotor BackPack XXS 2
2 x Aramid 50 daN 50 m
1 x Ballast 700gr OPALE
2 x Round Rod 3,0x1000 mm
1 x Strip 2,5x1,25x330 mm
2 x Strip 1,5x1,5x330 mm
1 x APM2.6 Power module with 5.3V DC BEC
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x MPX-Dean "T" Adapter
1 x 2 LiPo XH>EH adapter
1 x 30 cm BEC cable (male)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x 5 LiPo XH>EH adapter
1 x JETImodel SINGLE BEC
1 x Cabel charger transmitter GRAUPNER
1 x 30 cm BEC cable (female)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
2 x USB HLS prog. interface
1 x 3 LiPo XH>EH adapter
1 x TP/TopFuel - XH 2/3S Adapter
1 x CC 01
1 x CM-3
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x CC 05
1 x CC 02
1 x Adapter lead MPX/XT60
2 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Circlick securite
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x CC 03
1 x 6 mm aluminium horn with patella
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Horn 6/27 with M3 Bearing
1 x 20 mm carbon horn
1 x Small aluminium horn red (2pcs)
2 x Horn 13,5x16 mm (2 pcs)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Horn 5/15 with M2 Bearing
1 x 6 mm red aluminium threaded horn with patella
1 x Horn 16,5x20 mm (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Angle measurer
1 x Remote electric ignition system
1 x A/C economy plywood 600x300x6+.0 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Glases Flitemaster
1 x Glases Innovation Plus
1 x Spikes Band (5 m)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Brass control horn M2 long for wire (10pcs)
1 x Small aluminium horn gold (2pcs)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Opale Rucksack
2 x Round Rod 4,0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Set cintas unión paracaídas 145 cm
1 x ABS Strip 1.5x8.0x1000 mm
1 x Parachute BACKUP X100
1 x Wing OXY 5,0 m2
1 x Round Rod 1,25x1000 mm
1 x Strip ABS 2.0x3.0x1000 mm
1 x Round Rod 2,0x1000 mm
2 x ABS Strip 1.0x4.0x1000 mm
1 x ABS Strip 1.0x2.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x SPARK Switch 7.4v
1 x USB interface ALTIS
1 x DPSI Ampere battery backer
1 x SBEC 40
1 x MAX BEC
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x Horn mando small (2 pcs)
1 x PSC 6
1 x 5 mm M2 variable inclined horn
1 x Horn 5/10 with M2 Bearing
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Extension 2/3 lipos JST/C
1 x Opto Gas Engine Kill Switch
1 x Short adjustable control horn 3x24
1 x Big Crow DLE-170M
1 x Shirt Hispano Aviación
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Motor DLE 430 cc - Paramotors
1 x Motor DLE 200cc Premium Muffler
1 x Small Crow DLE-170M
1 x Motor DLE 200cc Std
1 x SyRen 50A 6V-30V Regenerative Motor Driver
1 x U Profile ABS 1,0x2,0x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Propeller RABOESCH M4 40 mm (3 Blades) (Left hydropropeller)
1 x 290 mm M5 Prop shaft
1 x Propeller RABOESCH M4 45 mm (3 Blades pr) (Right)
1 x Indoor hinge with servo arm integraded
1 x Rocket D3-P
1 x Rocket cardboard tube 25mm x 24mm x 230mm
1 x Rocket cardboard tube 50mm x 48mm x 250mm
2 x Rocket D9-7
1 x Towing hook
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Rigid coupling brass Ø 3 mm L: 20 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Propeller RABOESCH M3 50 mm (3 Blades pr) (Right hydropropeller)
1 x FALCON 29X9 CARBON PROPELLER (GAS)
1 x Propeller FALCON 5-BL 24x23.5
1 x FALCON 25X9 CARBON PROPELLER (GAS)
1 x FALCON 28X11 CARBON PROPELLER (GAS)
1 x FALCON 20X9 CARBON PROPELLER (GAS)
2 x Opto Gas Engine Kill Switch
1 x Motor DLE 170 M- Paramotors
20,444.25EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies