186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x DYNAMOMETER S-1580
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x 3 LiPo XH>EH adapter
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x L-Connector 4.0 mm x 1000 mm
1 x Motor ACTRO 50-2-760
1 x Screws M1,6x6 Allen
1 x Cierva C30 simulated motor
1 x Head lower part New
1 x Balls 4 mm
2 x Bearing 3x6x2,5
1 x Spring lock washer 3.1 mm (20 pcs)
2 x Blade holder lower
1 x Rotorshape Autogyro
1 x Cotton Flocks, bag/ 7 Kg
2 x Glass Bubbles (0,12 g) 350 ml
1 x Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l)
1 x Thixotropic agent tin/ 15 g (approx. 350ml)
2 x Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Gates hinge
2 x Indoor hinge with servo arm integraded
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Deposito SECRAFT V2 1000 ml Gas
1 x Double side nipple
1 x Compact Pitts Muffler OS MAX.35.40 FP
1 x EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG
1 x PowerBox Smokepump JETs 2x outside
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x LightBox SR
1 x USB Interface Adapter
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Fox 4000 mm Airworld,canopy frame
1 x BLANIK 50 V2 Silver/Orange (SebArt)
1 x Fox MDM 1 4000 mm Std.
1 x Fournier RF-4D
1 x BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x 280 cc gasoline fuel tank complet
1 x 18m Fitting barb
1 x Junta humo metalica G85 (DLE85/DLE170)
1 x Junta humo metalica G35 DLE35
1 x 
1 x EXTREME FLIGHT BLACK MAGNETIC ROUND FILLER PLUG
1 x Black "FUEL VENT" round aluminum overflow socket
1 x 7.94 x 4.76 mm tygon tube 1 m
1 x Deposito DUBRO 360 ml - 12 oz
2 x Cierva C30 spanish decoration Stickers
1 x Propeller AERO-NAUT M4 60 mm (3 Blades pr) (Right hydropropeller
1 x Screw M3x16
1 x Nut M2 securing
1 x Cierva C30 Body Spain
1 x Blade holder center
1 x Screws flush mount M2
1 x Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x Baal link 4/14/4 (5 pcs)
1 x Blade holder upper
1 x Ball joint long
1 x Suction funnel for carburetor 90D-L (red)
1 x EME 55 cc carburetor WALBRO
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x Pin hinge 34x16 mm (10 uds)
1 x Electric Fuel Pump 12V
1 x 20x1000 mm Ring Strap Back To Back
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Telemetry interface ALTIS 6 cm
1 x Optical RPM Sensor
1 x Long pinned hinge (6 uds)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Smoke pump RCEXL
1 x Servo Dymond D 37 Eco
1 x DYMOND VTX UBS Programming adapter
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Aluminium ignition bad (red)
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Aluminium cap bolt washer M4 blue (8 pcs)
1 x Cyanoacrylate MD GLUE plus 405, for extreme loads 20g
1 x Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x 10 mm gas motor standoff
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
5,859.20EUR
Manufacturers
Languages
Español English
Currencies