Top » Catalog » Hardware » Servos » Hitec » ROIHSB9380

152.90EUR

Servo HITEC HSB-9380TH
[ROIHSB9380]

Product Description
With ultra-efficient Neu brushless motors, titanium gear trains, low current consumption and constant output power, the HSB-93XX series of servos is the perfect match for the most discriminating pilots and racers. The HSB-9360’s speed is ideal for helicopter pilots.

Features
Programmable 12 Bit Digital Circuit Using the DPC-10 PC interface (PN 44426) and downloadable software, users can program a variety of features in the HSB-9XXX Series including: Fail Safe On/Off and Position, direction, EPA, Speed (Slower), dead Band, and Soft Start.

Power Efficient Brushless Motor Controller
Energy efficiency is a common interest for all modelers. Our HSB-9XXX Series uses the latest control circuit technology including a regenerative braking circuit which puts power back into the battery as the motor slows. This feature, combined with ultralow current draw under sustained loads, allows our brushless servos to consume 1/5 the power of most other brushless servos on the market today.

Custom NewMotor
Designed by Steve Neu exclusively for our HSB-9XXX Series, these high performance, brushless motors provide longstanding durability and performance.

Constant Torque Output:
Thanks to our revolutionary circuit and motor designs, the HSB-9XXX Series maintain their speed in a more consistent manner, regardless of load.

Hybrid MPD 1st Gear: Our unique ultra-durable Metal/Plastic/duralumin hybrid first gear prevents inadvertent electrical noise from affecting other components within your aircraft or vehicle.

Industry-Leading Titanium Gear Train Hitec was the first manufacturer to utilize low wear Titanium gears in our servos and continues to be the leader in Titanium gear technology.

25-Tooth Standard Spline
Our Brushless servos utilize a standard 25 tooth output spline for maximum compatibility with the large variety of aftermarket horn available on the market these days.

Specifications:
- Motor Type: 3 Pole Ferrite
- Bearing Type: Triple Ball Bearing Support
- Speed (6.0 V/7.4 V): 0.18/0.14 second
- Torque oz/in (6.0V/7.4V): 472 oz-in
- Torque kg/cm (6.0V/7.4V): 34 kg-cm
- Size in Inches: 1.57x0.79x1.50 in
- Size in Millimeters: 40x20x38 mm
- Weight oz: 2.4 oz
- Weight g: 68 g

temporarily out of stock

Reviews

Customers who bought this product also purchased

Fuel Station 20L temporarily out of stock	Epoxy 40 min. 4kg (Hardener) temporarily out of stock	Silicone red 6,0 qmm wire (25 m) temporarily out of stock
Connectors MPX 8 pins (green) 1 pair (male-female) temporarily out of stock	Gas, Smoke Fluid or Kerosene Refueling Dry-Break Ports w/Return temporarily out of stock	Epoxy L 40 min. 10 kg (Resin) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
    Aero-naut
    BLUE BIRD servo
    DUBRO
    Dymond
    Electron Retracts
    FEMA
    FUTABA
    Gabriel-Stahlformenbau
    Graupner
    Hacker
    Hitec
    JETI
    KAVAN
    KST Servo
    MKS Servos
    MULTIPLEX
    PICHLER
    ROBBE
    ROI-Import
    Savox
    SebART
    Secraft
    Servos
    Thunder Power
    Tonegawa-Seiko
    Toni Clark
    Top Model
    VOLZ
    Acc.Electronics
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAITO FG-120 TSS Boxer 4T
1,800.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	BALSA trip 3.0x3.0x1000 mm
2 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Balsa panel 4.0x100x1000 mm
1 x	quality beech plywood BIRCH 600x300x2.0 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Profile ABS Square 2 x 1000 mm
1 x	ABS angle 3,0x3,0x1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	T-Connector 4.0 mm x 1000 mm
1 x	Profile ABS half cane 2.0x1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	ABS angle 10,0x10,0x1000 mm
1 x	Profile ABS Square 3 x 1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
2 x	Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x	U Profile ABS 2,0x4,0x1000 mm
2 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	L-Connector 1.0 mm x 1000 mm
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS angle 2,0x2,0x1000 mm
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Ring 320 mm length (5 pcs)
1 x
1 x	SE Ring 200 mm (2 pcs)
1 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Cinta Goldfix 1m
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Spikes Band (5 m)
2 x	SE Ring 400 mm (2 pcs)
1 x	Marker ties (20 pcs)
2 x	SE Ring 480 mm (2 pcs)
2 x	20x1000 mm Ring Strap Back To Back
3 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Tape GFK 38 mm
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	SE Ring 330 mm (4 pcs)
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
2 x	Tape GFK 25 mm
1 x	SE Ring 300 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Motor A2212/13T
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	M3-M4 rubber washer (8 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
2 x	Spring lock washer 2.6 mm (20 pcs)
2 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium wide washer M4 Black (4 pcs)
1 x	Quicklock washer 3.5 mm (10 pcs)
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Silent-blocks DLE 170M
1 x	Towing hook
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Socket Head Screw M2x5
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	Titanium M3x0,5x8 mm Flat Head screw (4 pcs)
1 x	Servo M2x5/16 screw (4 pcs)
1 x	10 mm floating pad (72 pcs)
1 x	Threaded insert M3 (4 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Blind nut M2 (10 pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Treaded hexagonal socket insert M3 Br (4 pcs)
1 x	Servo M2x7/16 screw (4 pcs)
1 x	12 mm floating pad (49 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
1 x	Aluminium M2x12 mm screw (4 pcs)
1 x	Tapping Screw M2.9x13 (10 pcs)
1 x	Spring pin Ø 2 x 6 mm (10 pcs)
1 x	Spring pin Ø 1 x 6 mm (10 pcs)
1 x	Treaded hexagonal socket insert M4 Br (4 pcs)
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	3,0x60 mm allen screwdriver
1 x	Sealing Iron Sleeve STD
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Dust collector for mould cleaning
1 x	Precision wrench L100 mm
1 x	2,0x50 mm allen screwdriver
1 x	PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x	Balsa panel 10x100x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	RX Battery Eneloop 4,8 V JR 2500 mAh
1 x	A50 Backmountset complete V3/V4
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	Esc MasterBasic 70SB
1 x	Axle for motor A20-S (3 uds)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	200m servo "Premium" wire (white/red/blue)
1 x	Blue silicone 0,5 qmm wire (50 m)
1 x	Protective Cover for wires Ø 10 mm 1000 mm
1 x	50m servo "Premium" wire (white/red/blue)
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Esc MasterBasic 90 Opto
1 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Battery charging cable XT60
1 x	Cable adapter iCharger
1 x	Axle for motor A50-L
1 x	A50 Backmountset complete
1 x	Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
1 x	A50 Motor Mount Alu complete set
1 x	Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm
1 x	A40 Backmountset complete
1 x	A30-M/L/XL Backmountset complete
1 x	Esc MasterBasic 40SB
1 x	Alu-Cross for Backmount of A60-V2-Backmountmotors
1 x	Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x	Backmountset complete A40
1 x	A60 Motor Mount Alu complete set
1 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x	DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS
1 x	DUPLEX 2.4EX RC Switch
1 x	Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x	Black silicone 1,0 qmm wire (50 m)
1 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	JR silicone servo wire 0,35 qmm / 5m
1 x	Green silicone 0,25 mm² wire (25 m)
1 x	Cable set Premium™ MAXI "one4two"
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Green silicone 0,25 qmm wire (50 m)
1 x	1 m servo "Premium" wire (white/red/blue)
1 x	Cable Cargador FUTABA
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Cable set PREMIUM, fuselage/wing
1 x	6 mm Quick clamp_S (10 pcs)
1 x	Protective Cover for wires Ø 15 mm 1000 mm
1 x	Fiberglass heat shield Ø 6 mm 1000 mm
1 x	Extension MPX-MPX 20 cm
1 x	20x200 mm battery rings
1 x	Tape GFK 50 mm

4,700.03EUR