1 x | Glases Ace |
1 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
2 x | Glases Nimbus "Black" |
1 x | Glases Stratus |
1 x | Glases Moritz |
1 x | Glases Innovation Plus |
2 x | One touch canopy lock |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Locking cable tie 2.5x100 (uds) |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Steering arm 16 mm Ø 3 mm |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Screw-lock connector M2 (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
2 x | Cockpit plastic closing |
1 x | SUS wire 3m (nylon coated) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Electric spoiler 250 mm (2 pcs) |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Threaded coupler M2 (10 uds) |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Z type of cable coupler Ø 2 (2 uds) |
2 x | Angled clevis with threaded rod M3 |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
4 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Oracover Yellow CADMIO 10 m |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Oratex Yellow Cub 10 m |
1 x | Oracover Orange 2 m |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Ply-Span 450x600/13g White |
1 x | Ply-Span 450x600/13g Orange |
2 x | Oracover Yellow CADMIO 2 m |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Oracover Brown 2 m |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Oracover CHROME 2m |
1 x | Oracover Azul 2 m |
1 x | Oratex Red Fokker 10 m |
2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Oracover Red 2 m |
1 x | Oracover White 2 m |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Oracover light Grey 2m |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Oracover Yellow CUB 10 m |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | Oracover ROYAL RED 2m |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | Oracover Black 10 m |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Pine wood slat 3.0x10.0x1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | ORACOVER Fluor red (2 m) |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
2 x | Oratex Natural White 2m |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | Liston HAYA 8 x 8 x 1000 mm |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
2 x | Flap hinge 33x9 mm (6 pcs) |
3 x | Nylon hinge for flaps 33x9 (2 pcs) |
3 x | 15 mm reinforced hinge |
1 x | Large flex hinge (12 uds) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
3 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | Long pinned hinge (6 uds) |
2 x | Gates hinge |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Parachute expulsion foam |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | Glases Flitemaster |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Snap long M2 (10 uds) |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Pull-Pull complet set with CF rudder double servo arm |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Xplorer1 anemometro |
1 x | Propeller balancer |
1 x | Xplorer4 anemometro |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Ventus 1:4 set of instruments |
1 x | Turnbuckle M2x22/35 (2pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | wire tensioner (red) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Cable coupler M3 (10 uds) |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Oratex Antik 2m |
1 x | Birch plywood plate 600x300x3.0 mm |
2 x | Oracover CARBON Metalic 1 m |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Ply-Span 450x600/13g Black |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
2 x | 400 Newtons FEMA absorber |
2 x | Absorver mount set for 5-10 Kg models |
1 x | Compact on-board starting system (9512) |
1 x | Wheel FEMA 152 mm / 8 mm |
3 x | Landing gear retract neumatic (Jet Legend) |
1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
1 x | Wheel FEMA 100 mm / 6 mm |
2 x | Wheel FEMA 165 mm / 8 mm |
1 x | Wheel FEMA 90 mm / 6 mm |
2 x | 150 Newtons FEMA absorber |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Wheel FEMA 112 mm / 6 mm |
2 x | Wheel FEMA 178 mm / 8 mm |
2 x | Mudguard wheels 112/127 mm |
1 x | 76x23 Ø3.5 mm aluminium core wheel |
1 x | 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel |
1 x | Fibreglass-Spinner BS ∅155 x 200 mm |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | 28x5 mm wires output (2 pcs) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Katana Mini carbon wheel pants (2 pcs) |
1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
1 x | Coupling for 5 mm axis |
1 x | Propeller balancer |
2 x | Field folding model stand SebArt |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Canopy Latch |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | Brake for 140 mm wheels |
1 x | L-shaped servo mount |
1 x | LA500 front gear holder |
2 x | Raer wall |
1 x | Head core |
1 x | Side Plate |
2 x | Blade holder lower |
2 x | Head upper part |
2 x | Servo Fork |
1 x | Nut M2 securing |
1 x | Blade Holder Full (3 blades) |
1 x | Propeller Pleg CAM Carbon 12x9 |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
1 x | AC-10 pre-rotacion with motor |
2 x | Blade holder center |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | Rotorshape Elevator |
1 x | Screws M1,6x6 Allen |
1 x | Fuselage Autogyro RAINBOW |
1 x | Propeller Pleg CAM Carbon 16x10 |
1 x | 18 mm reinforced hinge |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Restrictor FESTO 3/3 mm |
1 x | 120x60 mm SLH KOVO wheel |
1 x | 200 Newtons FEMA absorber |
1 x | Compact on-board starting system (9715) |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | LA500 housing-upper cyclic |
2 x | Baering 3x8x4 |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | Battery plate |
1 x | Wheel keeper washer |
1 x | Ball joint long |
2 x | Blades 330mm |
2 x | Balls 4 mm |
1 x | Pilot LA 500 |
1 x | LA500 pre-rotation gear hub |
1 x | Complet landing gear |
1 x | LA500 housing-lower cyclic |
1 x | Cierva C30 simulated motor |
1 x | Head runner |
2 x | Screw M3x16 |
1 x | Piñon motor rotor LA-500 |
1 x | Autogyro Cierva C30 Spain |
1 x | Head core bushing |
1 x | Rotorhead pushrod |
2 x | Bearing 3x6x2,5 |
1 x | Tail support (2 pcs) |
1 x | LA500 cyclic central part |
1 x | Propeller Pleg CAM Carbon 10.5x6 |
1 x | Propeller Pleg CAM Carbon 10x4 |
1 x | Propeller Pleg CAM Carbon 14x10 |
1 x | Propeller Pleg CAM Carbon 14x7 |
1 x | Propeller Pleg CAM Carbon 11x6 |
|
6,936.90EUR |