Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB320

398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]

JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Transmitter FUTABA T26SZ + R7214SB
1,079.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Jeti Black cap
1 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
2 x	Long pinned hinge (12 uds)
3 x	Nylon hinge 20x20x0,3 (10 pcs)
2 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	Large flex hinge (12 uds)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	Unmounted aluminium pin 6x98 mm (2 pcs)
3 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	15 mm reinforced hinge
2 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
2 x	Nylon hinge for flaps 33x9 (2 pcs)
2 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	Long pinned hinge (6 uds)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
3 x	18 mm reinforced hinge
1 x	Miniature brass strap hinge, 1 m
2 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x	Micro flex hinge (12 uds)
3 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
2 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	One touch canopy lock
1 x	Steering arm 12 mm Ø 4 mm
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Canopy Latch
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Electric spoiler 250 mm (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm
1 x	Covered closure or fairings
1 x	Steering arm 16 mm Ø 4 mm (2 uds)
1 x	Ventus 1:4 set of instruments
1 x	Extractor piñones 2.3/3.2 mm
1 x	Cable silicona macho batt. receptor 30 cm (Futaba)
2 x	Extension 90 cm (Futaba)
2 x	Extension silicon 35 cm male (Futaba)
2 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Cable S.BUS 3 salidas 300 mm
2 x	Premium servo extension 100cm
2 x	Cable silicona macho batt. receptor 30 cm (Graupner)
1 x	200 mm extensión servo HITEC/JR
1 x	Premium servo extension 25cm
1 x	Extension 100 cm (Futaba)
1 x	Prolongador S-Bus JR/JR 10cm
1 x	Extension silicon 30 cm male (Futaba)
2 x	Extension 30 cm (Futaba)
1 x	Cabel "Y" 15 cm
2 x	Prolongador S-Bus JR/JR 20cm
1 x	Extension silicon 10 cm (Graupner)
2 x	Extension silicon 30 cm male (Graupner)
2 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
2 x	Aluminium wide washer M4 Gold (4 pcs)
2 x	Pin hinge 39x20 mm (10 uds)
2 x	Medium pin type hinge (12 uds)
1 x	Propadapter for motor A50-V3
1 x	DUPLEX 2,4GHz MRPM-AC EX
2 x	Extension silicon 100 cm (Graupner)
1 x	DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS
1 x	Extension silicon 35 cm (Futaba)
1 x	Screwdriver for Torx® TX8
1 x	Axle for motor A50-L
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
2 x	Servo Dymond D 37 Eco
1 x	Servoholder Dymond DS 1800 MG Digital (2 pcs)
1 x	DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x	DUPLEX 2.4EX Central Box 210
1 x	Battery RX JETI LiIon RB 2600 7.2v
2 x	Extension silicon 100 cm (Futaba)
1 x	Premium servo extension 75cm
1 x	DUPLEX 2.4EX MUI 150 Sensor
1 x	AddCAP 10AS capacitors
1 x	DUPLEX 2.4EX Central Box 220
1 x	DUPLEX 2.4EX Central Box 320
1 x	Extension silicon 75 cm (Futaba)
1 x	silicon 100 cm Futaba Extension Ø 0,35 mm
2 x	Gear for D 200 BX
2 x	50 mm gas motor standoff
2 x	Small flex hinge (12 uds)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
1 x	10 mm gas motor standoff
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
2 x	40 mm gas motor standoff
1 x	Small pinned hinge (12 uds)
2 x	35 mm gas motor standoff
2 x	Flap hinge 33x9 mm (6 pcs)
2 x	6 mm Quick clamp_S (10 pcs)
2 x	Gates hinge black 30x16 mm (2 pcs)
1 x	aluminium servo arm V2-JR 2,0 inch M3
1 x	Small pinned hinge (6 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	11 mm Rubber pads (14 pcs)
1 x	Aluminium ignition bad (blue)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
3 x	25 mm reinforced hinge
1 x	15 mm gas motor standoff
2 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Aluminium battery holder red
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	AL Axle Shaft 4.0x16 mm (2 uds)
1 x	15 mm floating pad (30 pcs)
1 x	20 mm gas motor standoff
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	5 mm gas motor standoff
2 x	Aluminium wide washer M4 Black (4 pcs)
2 x	Indoor hinge with servo arm integraded
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	10 mm Quick clamp_L (6 pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Round flex hinge (12 uds)
1 x	Aluminium cap bolt washer M3 black (8 pcs)
2 x	10 mm floating pad (72 pcs)
1 x	A50 Backmountset complete V3/V4
1 x	Swing 1000
1 x	KOLIBRI 90 LV-I Esc
1 x	KOBY 90 LV Esc
1 x	Esc KOSMIK 200+ HV
1 x	KOLIBRI 140 LV Esc
1 x	RANGER Jet NAVY 1.854mm combo
1 x	TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo
1 x	RANGER Jet Red/Yellow 1.854mm combo
1 x	Extension silicon 50 cm (Graupner)
1 x	Extension silicon 10 cm (Futaba)
1 x	Ball Bearings for motor A60-V2
1 x	Bearings for motors hacker A50
1 x	Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x	A60 Motor Mount Alu complete set
1 x	Esc MasterBasic 90 Opto
1 x	Esc master MEZON 120 Lite
1 x	PPS-4D Propeller
1 x	GPS Logger Dymond
1 x	DYMOND VTX UBS Programming adapter
1 x	Boomerang ELAN THUNDERBIRD Combo
1 x	TURBINATOR 2 RED/WHITE 1778 mm Combo
1 x	RANGER Jet CANADA 1.854mm combo
1 x	RANGER Jet Red/White 1.854mm combo
1 x	TURBINATOR 2 ORANGE/SILVER 1778 mm Combo
1 x	Boomerang SPRINT V2 Red/Yellow
1 x	Boomerang SPRINT V2 Red/White/Blue
1 x	Boomerang SPRINT V2 Yellow/Black
1 x	Propeller MENZ-S 16x8
1 x	Propeller MENZ-S 18x8 3-Blades
1 x	Propeller MENZ-S 17x8
1 x	Propeller MENZ-S 19x8
2 x	DUPLEX R6 receiver REX Assist
2 x	DUPLEX 2.4EX Satellite receiver Rsat 2
2 x	VARIO module Hott
1 x	Receiver DUPLEX R9 EX 2.4 GHz
1 x	Epoxy 40 min (Hardener). 10Kg
1 x	Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g
1 x	SE Ring 300 mm (2 pcs)
1 x	SE Ring 250 mm (2 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Rudder 2_Tray 4.5~5 inch
1 x	Aluminium wide washer M3 gold (4 pcs)
1 x	Red aluminium servo arm V1-Futaba 15 mm iM2
1 x	Antenna Hole Cap V1 (Silver)
1 x	Floating M4 washer pad (36 pcs)
1 x	Circlick securite
1 x	Extension silicon 25 cm (Futaba)
1 x	Futaba male 40 cm extension
1 x	Receptor GRAUPNER GR-24 HoTT
1 x	Receiver GRAUPNER GR-12 HoTT
1 x	DUPLEX R7 receiver 2,4GHz
1 x	DUPLEX R7 REX receiver 2,4GHz
1 x	DUPLEX R6G indoor receiver 2,4GHz
1 x	DUPLEX R12 EPC receiver 2,4GHz
1 x	DUPLEX Satellite receiver Rsat 900
2 x	Receiver DUPLEX R3L EX 2.4 GHz
1 x	DUPLEX R7 receiver nano 2,4 GHz
1 x	DUPLEX RC Droid Box - DC/DS
1 x	Receiver GRAUPNER GR-16 HoTT
1 x	Blue aluminium servo arm V3-Hitec 1,0inch M3
1 x	Floating M3 washer pad (36 pcs)
1 x	Cyano INSTA - CURE™ Pocket (18g)
1 x	Epoxy Resin L + Hardener GL 1 (30 min)
1 x	Epoxy 5 min. 500 g (Hardener)
1 x	wire tensioner (silver)
1 x	SE Ring 400 mm (2 pcs)
1 x	25 mm gas motor standoff
1 x	Transmitter Stick Ends V1 Blue - M3 (2 pcs)
1 x	30 mm gas motor standoff
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Motor mount M
1 x	Red aluminium servo arm V1-Futaba 1,0" inch M2
1 x	Red aluminium servo arm V1-Futaba 20 mm M2
1 x	Flap hinge (6 pcs)
1 x	Suction funnel for carburetor 90D-M (red)
1 x	TX-Tray V1 (L) (Black)
1 x	Fuel line plugs (Blue)
1 x	Fuel Fittings-Gold
1 x	Transmitter Stick Ends V5 Blue - M4 JR/DX7
1 x	double Fuel Dot V2 (silver)
1 x	Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x	Receiver DUPLEX REX 3 A20 2.4 GHz
1 x	DUPLEX R12 receiver REX Assist
1 x	Satellite receiver DUPLEX Rsat 900 NG MHz
1 x	Receptor DUPLEX REX R9 Slim

29,840.11EUR