Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	Turbine MAMMOTH 25.4 Kg temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

ProgBox PRO LCD Hobbywing
44.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Carbon fibre sandwich sheet 350x150x3 mm
2 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
2 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Buy Perforated film 100 cm / 50 m
2 x	ABS 500 x 400 x 1 mm (white)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
2 x	25 mm reinforced hinge
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Gates hinge 30x16 mm (2 pcs)
1 x	Flap hinge (6 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Gates hinge aluminium (1 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Fast'n EZ-CA-Hinge (12 uds)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Glases Ace
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (10 m)
1 x	Connectors banna oro 8,0 mm (M/F)
1 x	Small aluminium horn red (2pcs)
1 x	Futaba Female 40 cm extension
1 x	Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x	Support pump Xicoy X45
2 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
2 x	Light System
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Gates hinge black 30x16 mm (2 pcs)
2 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
2 x	Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x	Aluminium sheet 500x250x0,5mm
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
2 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Release film 100 cm x 50 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Peel ply 100 g/m² (plain weave) 50 cm x 2m
1 x	ABS 500 x 400 x 0,5 mm (white)
2 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Buy Perforated film 145 cm / 50 m
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Vacuum bag, 1200 mm x 50 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Peel ply 93 g/m² (plain weave) 150 cm x 5m
2 x	Styrene plate 320x120x1.0 mm
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	Foam plastic plates (310x210x2 mm)
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Sandwich carbon + poplar 2mm + carbon 290x160 mm
3 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	PPM Encoder Module
1 x	Combustible Glow "KAVAN" air/heli 10% nitro
1 x	PIX Hawk with accesories
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x
1 x	Ball Bearing Oil 25 ml
1 x	Extension lead 15 cm Multiplex
1 x	Extension silicon 25 cm (Graupner)
1 x	Extension silicon 35 cm male (Futaba)
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension silicon 30 cm male (Futaba)
1 x	Extension silicon 100 cm (Futaba)
1 x	Extension silicon 10 cm (Futaba)
1 x	Extension silicon 30 cm male (Graupner)
1 x	Large flex hinge (12 uds)
2 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	Long pinned hinge (12 uds)
1 x	Resistor 3W 5% 2R2
1 x	Combo lighting module with covering drop shape
1 x	Resistor 3W 5% OR47
1 x	Heat sink for Optotronix LEDs
1 x	LED blink wire flashing (red - 2pcs)
1 x	Cover cap drop-shaped paintable 43 mm
1 x	Support Filtro FESTO
1 x	Soporte grifo FESTO (2 pcs)
1 x	Soporte filtro FESTO (4 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Resistor 3W 5% OR82
1 x	Support XT60 conector (2 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support Pitot JETI
1 x	Support conector MPX (6 pcs)
1 x	Support ECU Xicoy X-45
1 x	Tube support Ø 6mm (10 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Angle support XT60 conector
1 x	Fiberglass plate 350x150x0.3 mm

6,279.95EUR