109.00EUR

GRE-18 RTR Crawler 1:18 Orange
[KAV06GRE180O]


Fully assembled 1/18th scale RC crawler model, including electronics and battery pack. Perfect size for both outdoor and indoor off-road driving.

Enter the scale crawler world with our brand new models GRE-18
Perfect size.
The new range of 1/18th scale RC crawlers brings you the best of both big and small RC cars. From the bigger scale models, it inherits the outdoor ability, so it's good for a walk in nature, or a real expedition, while still having a compact size like its smaller relatives. This means you can pack it into any backpack and have it with you anywhere, anytime. And when the weather doesn't allow being outside, an adventurous course, full of obstacles can be found even in your living room!
Scale look.
Thanks to a cool bodyshell with scale accessories, the GRE-18 models are great to look at. Distinctive paint with transparent windows is complemented by molded bumpers, front grille, snorkel, side mirrors, roll cage and rear light covers. When turned on, the car comes to life by in-built LED lights. They have enough power for you to be able to drive in a dark, which provides an amazing atmosphere and a whole new experience.
For any terrain.
A tough metal frame, together with 4-link suspension system and soft dampers, provides enough ground clearance, angles and articulation for overcoming obstacles of the outdoor driving. Full time 4WD system, closed differentials and soft tires with deep thread will always deliver the traction you need. On the top of that, water-resistant electronics mean, you don't have to worry about any conditions - rain, mud, puddles, or deeper streams - nothing is going to stop you!
Always under control.
A strong motor is effortlessly tamed by reduction gearbox. Digital servo and quality remote control system will give you confidence and precision. The transmitter features a necessary settings for center trims, channel reverses and end point adjustment and thanks to an easy disassembly it won't take any extra space.
Ready for action.
Powerful battery pack with a capacity for up to 45 minutes run time and compact USB charging cable, that can be plugged into any mobile phone charger will keep you going at all times. Any time you find a tempting challenge, you will be ready.

Features
Great scale-looking lexan body shell with distinctive paint and transparent windows
Molded accessories like the front grille, side mirrors, snorkel, roll cage and more
Adjustable bumpers and body mounts
Realistic front and rear lights
Strong metal frame
4-link chassis with great articulation like on full-scale models
Long travel dampers with soft springs
Full-time 4WD system with 104:1 final drive ratio for great low-end torque and control
Locked differentials for excellent crawling performance
Realistic tires with soft rubber and good thread for any terrain, mounted on bead-lock rims
55T brushed motor with upgraded power
Chassis mounted 1Kg 3-wire digital waterproof servo for precise control
Fully waterproof receiver and ESC for any weather conditions
Free AUX port for additional lights, or FPV system
600mAh 7.4V 2S Li-Po battery pack, which lasts up to 45 minutes
Quality 2.4GHz digital radio system featuring digital trims, reverse and end point adjustment EPA
Transmitter can be disassembled to fit even smaller space
Compact USB charging cable
Available option parts

KAV06240071 GRE Aluminum Upgrade Shocks Set
KAV06240072 GRE Steel U-Joint Cross Ball Set
KAV06240074 GRE18 Steel U-Joint Drive Shaft Set
KAV06240079 GRE Optional Brass Wheel Weight - 24g

Technical data
Motor: 050 55T
Servo: 1Kg digital (3-wire)
Battery: 600mAh 7.4 2S Li-Po
Charger: USB 150mA
RTR set includes
Fully assembled GRE-24 vehicle with painted body and battery pack
Transmitter
USB charging cable
Wheel nut wrench
Screwdriver
Binding jumper cable
Spare springs
Instruction manual
Required for operation

4xAAA batteries for the transmitter

Wheelbase [mm] 155
Width [mm] 113
Length [mm] 275
Height [mm] 135
Weight [g] 280
Ground clearance [mm] 34
Wheel diameter [''] 2.2
Drive 4x4
Gear ratio 104:1
Motor type DC
Li-Po [čl.] 2
Chassis type Off-road,Crawler,Hobby


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Carbon roving DowAksa / 24k / 1600 tex
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Aluminium wide washer M3 blue (4 pcs)
1 x Aluminium wide washer M4 Blue (4 pcs)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Aluminium cap bolt washer M3 blue (8 pcs)
1 x Lock washer 2.2 mm (20 pcs)
1 x Aluminium cap bolt washer M3 red (8 pcs)
1 x Circlik for shaft 1.9 mm (10 pcs)
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
2 x BALSA triangular 10x10x1000 mm
2 x Beech dowels 10 mm x 1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x BALSA trip 5.0x5.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Parachute P4
1 x Ballast 700gr OPALE
1 x MAX pilot ARTF
1 x Windsock Ozone L -1200 mm
1 x Aramid 50 daN 50 m
1 x Opale Rucksack
2 x Wing OXY 0,5 pulgadas2
2 x Para-RC "RC-Evo-Cross" Rescue
1 x Trike XL motor set (motor+esc+prop)
2 x Set cintas unión paracaídas 145 cm
2 x Wing OXY 5,0 m2
1 x Paramotor Trike XL
2 x Paramotor BackPack XXS (without accessories)
2 x Para-RC Trike "RC-Bullix"
2 x Paramotor Kit Camo H1.5/ Ben Red
1 x Windsock Ozone L - 700 mm
1 x Surface Indicator Gauge Small
1 x Propeller balancer
2 x Propeller balancer
1 x Truck-trailer for gliders 720 x 239 mm
1 x Medidor ángulos y/o incidencias
1 x Towing hook
1 x Connectors banna oro 6,0 mm (M/F)
2 x Small pinned hinge (12 uds)
2 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x Piloto jet 130 mm
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
4 x Landing gear axle Ø 6 mm (2 uds)
1 x Landing gear axle Ø 8 mm (2 uds)
1 x 89x25 mm (3.50") Type jets aluminium core wheel
1 x 73x24 mm hard foam KOVO wheel with bearing (2 pcs)
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Field folding model stand
1 x Screw M3x30 (10 pcs)
1 x Treaded hexagonal socket insert M3 Br (4 pcs)
1 x Socket Head Screw M2x10
1 x Screws 2,2 x 6,5 mm (20 pcs)
1 x Servo M2x5/16 screw (4 pcs)
1 x Treaded hexagonal socket insert M4 Br (4 pcs)
1 x Screw M3x20 (10 pcs)
1 x Screw M4x30 (10 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Tapping Screw M2.2x65 (10 pcs)
1 x Titanium M3x0,5x6 mm Flat Head screw (4 pcs)
1 x FESTO connector 1/8 Quick 6mm 90º
1 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Balsa panel 4.0x100x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x 38x4,5 mm wires output (2 pcs)
1 x Servo HITEC HS-225 MG
2 x Cable grommet Ø 4 mm (4 uds)
2 x Snap long M2 (10 uds)
2 x Split M1,2x10 (10 pcs)
1 x Blue aluminium double servo arm V3-Hitec 3,5inch
3 x Steering arm 12 mm Ø 4 mm (2 uds)
2 x Servo HS-5565MH High Voltage
1 x Servo HITEC HS-5475 HB Digi
1 x Allen wheel collar M3x3
2 x Locking cable tie 2.5x100 (uds)
1 x Servo HITEC D-955 TW Titanium
2 x Servo HITEC D951 TW
1 x Servo lock HS-80/81/82/85 (2 pcs)
1 x Servo HITEC D131 MW nano
1 x Servo HITEC D950 TW
1 x Snap for floding prop for 2 mm axi
1 x Servo HITEC D941 TW
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Snap short M2 (10 uds)
2 x Servo HITEC HS-5087 MH
2 x Steering arm 12 mm Ø 3 mm (2 uds)
2 x Allen wheel collar M4x6
1 x Split pin 1.6x16 mm (10 uds)
3 x 28x5 mm wires output (2 pcs)
1 x Servo HITEC HS-5585MH
1 x Allen wheel collar M4x4
1 x Servo case HS-225MG/225BB/5245MG
1 x Tip wing protector 28x10x12 (2 pcs)
1 x Servo HITEC D645 MW
1 x HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program
2 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Steering arm 16 mm Ø 3 mm
1 x Servo HITEC HS-45 HB
1 x T- Fittings red color (2pcs)
1 x Conector FESTO M3 Quick 3mm 90º
2 x Deposito combustible tipo "turbina" 330 ml
2 x FESTO connector M7 Quick 6mm 90º
1 x Pin hinge 39x20 mm (10 uds)
1 x U Profile ABS 2,0x4,0x1000 mm
1 x U Profile ABS 8,0x4,0x1000 mm
2 x FESTO connector M5 Quick 6 mm
2 x FESTO connector M7 barb fitting 4mm
1 x Quick hose connector 4-3 mm
2 x FESTO connector M7 barb fitting XL Tygon
1 x Scale exhaust K100TP
1 x 1000 ccm gasoline fuel tank
2 x 280 cc gasoline fuel tank complet
3 x Pin hinge 34x16 mm (10 uds)
1 x Balsa panel 6.0x100x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Balsa panel 3.0x100x1000 mm
1 x A/C quality beech plywood 600x300x8.0 mm
2 x Landing gear frontal support 29x26x13,5
1 x BALSA trip 6.0x6.0x1000 mm
1 x Parachute PV6 for F3J
1 x Wheel FEMA 165 mm / 8 mm
1 x Wheel 22 mm
1 x Wheel Ø 75 mm (1 ud) Electron Retracts
1 x Superlight wheel 125 mm with valve (2 pcs)
1 x Landing gear axle Ø 4 mm (2 uds)
1 x Wheel collar 3 mm Ø (4 uds)
2 x Landing gear axle Ø 5 mm (2 uds)
2 x Cross Connector 4.0 mm x 1000 mm
2 x AL Axle Shaft 4.0x16 mm (2 uds)
2 x Landing gear axle 4x21 4 mm (2 uds)
1 x Mould Resin P 10 kg
1 x Profile ABS half cane 3x1000 mm
1 x Wheel FEMA 82 mm / 5 mm
1 x Wheel FEMA 90 mm / 6 mm
1 x Wheel FEMA 178 mm / 8 mm
1 x Fuel line plug Small 2 pcs
1 x Aluminium cap bolt washer M4 green (8 pcs)
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Propeller hub spacer 8/5.5
1 x Steering arm 16 mm Ø 4 mm
1 x 41x5,5 mm wires output (2 pcs)
1 x Servo HITEC D625 MW
2 x Tip wing protector 30x10 (2 pcs)
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x Small flex hinge (12 uds)
1 x ABS rectangular profile 10x5.0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x ABS angle 6,0x6,0x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Extra hard 1500 ccm complete gasoline fuel tank
1 x 550 cc gasoline fuel tank complet
1 x Fuel Fittings-Blue
1 x Miniature brass strap hinge, 1 m
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Long pinned hinge (6 uds)
1 x Glow Plug Clip 1.3 Ah
1 x Glases Innovation Plus
1 x Aluminium cap bolt washer M3 green (8 pcs)
1 x Flat washer 2.2 mm (20 pcs)
1 x Aluminium wide washer M3 red (4 pcs)
1 x Aluminium wide washer M4 Black (4 pcs)
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent)
1 x FESTO connector M5 Quick 4 mm
2 x Fuel Fittings-Gold
1 x Birch plywood plate 600x300x3.0 mm
1 x Lite Plywood panel 600x300x3.0 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Servo HITEC HS-5125 MG Slim Metal Gear Wing Servo
1 x Steering arm 12 mm Ø 4 mm
1 x Servo HS-5070 MH Hi Volt
1 x Cable grommet Ø 5 mm (4 uds)
1 x Canopy Latch
1 x Control for forward wheel (MINI)
1 x Servo HITEC HS-125 MG
1 x Split pin 1x8 mm (10 uds)
1 x HPP-21 PLUS PC and Field Programmer for Hitec Digital Servos
1 x Brazo servo aluminio HITEC HS-125MG/5125MG
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Servo HITEC HS-5085 MG Digi
1 x Allen wheel collar M3x5
1 x Servo HITEC D145 SW
1 x Small pinned hinge (6 uds)
1 x Profile ABS half cane 4x1000 mm
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x Rubber profile 8-2 mm 2M
1 x Rubber profile 6-2 mm 2M
1 x Couple M4 for wire (10 pcs)
1 x Profile ABS half cane 6.0x1000 mm
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Flat Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 2.0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Profile ABS half cane 5.0x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x 1000 ccm complete gasoline fuel tank
1 x Quick hose connector 6-6 mm
1 x FESTO connector M7 Quick 4 mm
1 x Y-Hose connector 4-4-4mm
1 x Quick hose connector 4-4 mm
1 x 1000 cc gasoline fuel tank complet
1 x Extra hard 250 ccm complete gasoline fuel tank
1 x Fuel tank 500ml (17oz)
1 x FESTO connector M7 Quick 4mm 90º
1 x T-Hose connector 3-3-3 mm
1 x Support 45% Hopper JetsMunt
1 x BETA 1400 RTF Red
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Large flex hinge (12 uds)
1 x 15 mm reinforced hinge
1 x Gates hinge 30x16 mm (2 pcs)
1 x Micro flex hinge (12 uds)
1 x Gates hinge
1 x Flap hinge 33x9 mm (6 pcs)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Gates hinge black 30x16 mm (2 pcs)
1 x 25 mm reinforced hinge
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x M3-M4 rubber washer (8 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x Gates hinge aluminium (1 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 18 mm reinforced hinge
2 x Truck-trailer for gliders 720 x 285 mm
1 x WingFix ULTRA Black Edition
12,813.04EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies