4.50EUR

CA Glue fast 20g
[R1501032]


CA Glue fast 20g
Superglue (fast) is a normal type Cyanoacrylate adhesive with fast setting, high flow abilit, and good penetration characteristics.

It has been specially formulated to achieve the strongest possible bond between well-mated, non-porous surfaces, such as rubber, metals, plastics, glass, etc.

Single-component
Transparent
Very low viscosity, high setting speed
Bonds obtain hand strength after 2-15 seconds
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

Physical properties
Liquid state
Base Ethyl Cyanoacrylat
Colour clear
Specific Gravity (at 20 °C) 1.053~1.060
Refraction Index (n 20 D) 1.439
Flash Point (°C) >80 °C
Boiling Point (°C) 65/6mm Hg
Viscosity (cP) 3-5
Cured state
Colour clear
Specific Gravity (at 20 °C) 1.1~1.3
Processing temperature -55 - 80 °C
Refraction Index (n 20 D) 1.49
Dielectric Constant (bei 10 MHz) 3.5
Dielectric Loss (bei 10 MHz) 0.067
Soluble in Acetone, Dimethyl formamide,Nitromethame and Dimethyl sulfoxide.
Bond strength (Tensile shear strength, cured for 24 hours at 20-25 °C)
kg/cm²
Rigid PVC to rigid PVC 40-60
ABS to ABS 50-70
Polycarbonate to polycarbonate 80-120
Polystyrene to polystyrene 30-45
Natural rubber to natural rubber 5-9
Steel to steel 190-210
Stainless steel to stainless steel 200-220
Aluminum to aluminum 160-180
Copper to copper 150-170
Steel to rigid PVC 50-60
Stainless steel to neoprene 5-10
SBR to SBR 5-10
Cure speed
Seconds
ABS to ABS 4-5
Wood to wood 50-60
ABS to stainless steel 5-10
NBR to stainless steel 3-5
NBR to NBR 3-5
Stainless steel to stainless steel 3-5
ABS to NBR 3-5
Wood to ABS 5-10
Storage and shelf life:
Our superglue can be stored in a cool and dark place for about 1 year (for example in the refrigerator at + 5 °C).
At room temperature about 6 months. At temperatures above 20 °C the shelf life is further reduced (e. g. in the summer months)


temporarily out of stock
temporarily out of stock

Reviews

Customers who bought this product also purchased
Sparkplug NGK CM6
Sparkplug NGK CM6

temporarily out of stock
temporarily out of stock

TYGON tubo 1 m Diam. 3.4 x 2.0  mm
TYGON tubo 1 m Diam. 3.4 x 2.0 mm

temporarily out of stock
temporarily out of stock

Tygon tube 6.35 - 3.18 mm 1m
Tygon tube 6.35 - 3.18 mm 1m

temporarily out of stock
temporarily out of stock

Propeller MENZ-S 23x8
Propeller MENZ-S 23x8

temporarily out of stock
temporarily out of stock

Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)

temporarily out of stock
temporarily out of stock

Conector BEC female (10 pcs)
Conector BEC female (10 pcs)

temporarily out of stock
temporarily out of stock

Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x 4 LiPo XH>EH adapter
1 x CM-3
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x TrainerCord (master-learner)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x CC 03
3 x Black copper lacquer wire Ø0,2 mm (5 m)
3 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Bec MR UBEC 5A (5v/6v/7v)
2 x CC 05
1 x 3 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Cabel charger transmitter GRAUPNER
1 x JETImodel SINGLE BEC
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x APM2.6 Power module with 5.3V DC BEC
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
2 x Adapter lead MPX/XT60
1 x MPX-Dean "T" Adapter
1 x 5 LiPo XH>EH adapter
2 x 2,5x60 mm allen screwdriver
1 x Starter 12v (Max 90 and 15ccm)
1 x Copier 2x20 cm pcs
1 x Hot Glue Stick GREEN
1 x Starter Sullivan-STAR 603 DINATRON
1 x Hexagonal ball head 2.0 x 50 mm
2 x Stickers-digit for marking
1 x SE Ring 360 mm (2 pcs)
1 x 6 mm ball link M3 (10 pcs)
1 x ABS Strip 1.5x3.0x1000 mm
1 x Smoke set "Glider"
1 x Medium pin type hinge (12 uds)
1 x Legs + electric brakes for Viper Jet 90
1 x Support pumb/filter Xicoy X45
1 x PowerBox SparkSwitch RS
2 x Circlick securite
1 x Ferrita 17x10x6.5 mm
1 x Aramid fibre shears Proton®, 21 cm / 8" length
1 x Dremel PERMAGRIT thin lime
1 x Digital weight, angle and balance meter BASIC
1 x EC-Cutter
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
2 x 1,5x50 mm allen screwdriver
1 x Digital precision scale up to 2000 g
1 x Dust collector for mould cleaning
1 x Z Bender - S Type Tool
1 x Screwdriver for Hexagon 1,27mm
1 x 30 cm BEC cable (female)
2 x Fabric scissors curved (offset handles), 16 cm / 6" length
1 x CC 02
2 x Ball Link Plier
1 x 3,0x60 mm allen screwdriver
1 x Screwdriver for Torx® TX6
1 x Fresa corte diamante Ø 1.0mm (bola)
1 x Screwdriver for Torx® TX8
1 x 25 mm Sandpaper file
1 x Dean-T Plug Mold
1 x PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
2 x 2 LiPo XH>EH adapter
1 x Vacuum pump 12 CFM
2 x Adapter lead MPX/EC3
2 x DG-303 ACRO 3750 mm (Airworld)
1 x Fox MDM 1 4000 mm Std.
1 x LIBELLE Standard 3.8m D-box H-201
1 x ASW 15 5000 mm (Airwold)
1 x Fox MDM 1 4000 mm DeLuxe
1 x ASH 31 Mi Scale:1/3 - 7m
2 x Liston HAYA 10 x 10 x 1000 mm
2 x Pine wood slat 3.0x7.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
2 x BALSA leading edge 8x10x1000 mm
2 x Beech dowels 4.0 x 1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
2 x BALSA trip 4.0x4.0x1000 mm
2 x BALSA trip 3.0x3.0x1000 mm
1 x Balsa panel 1.5x100x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x ASW 20 5000 mm with winglets (Airwold)
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x Straightened rod Ø 14.0 mm x 1000 mm
2 x BALSA trip 5.0x5.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Motor OS 3820-1200 electric
1 x Motor A2212/13T
1 x 30 cm BEC cable (male)
1 x AXI 2217/20 V2 Long "F5J"
1 x AXI 2826/12 V2
1 x Ferrita 27x14x7 mm
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Extra Hard Titanium Herxagon Screwdrivers
1 x HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x Propeller diller for DA50, DLE55 red
1 x Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x Tube bender
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Birch plywood plate 600x300x1.2 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x Beech dowels 10 mm x 1000 mm
1 x AXI 2212/20 V2
1 x AXI 2814/10 V2 Long
1 x AXI 2826/10 V2
1 x AXI 2814/16 V2 Long
1 x AXI 2212/12 V2
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x BEC 3A FOXY
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Extension 2/3 lipos JST - JST/C
1 x Precision wrench L100 mm
1 x Dremel PERMAGRIT 18 mm round lime
1 x Heli blades angle measurer
1 x Goma arrancador Ø36 mm x 30 mm
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Civilian pilot "Curt" size 9cm (Slimline)
1 x Giant Scale Muffler D.A. 70
1 x A/C quality beech plywood 600x300x0.6 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x A/C quality beech plywood 600x300x1.5 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Birch plywood plate 600x300x2.5 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x FOX MDM-1 3.500 mm ARF White
18,749.23EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies