Top » Catalog » Hardware » Adhesives/Resin/Epoxy » Cianocrylate » Cyanocrylate R&G » R1501022

4.47EUR

CA Glue (medium) 20g
[R1501022]

CA Glue (medium) is a medium viscosity cyanoacrylate adhesive, suitable for bonding applications that require a larger gap fill.
Its medium cure speed and medium viscosity makes CA Glue (medium) suitable for a lot of industrial applications.
Single-component
Transparent
Solvent-free
Special bottle*
*A metal needle is fitted in the lid, which is pressed into the opening of the bottle's dosing attachment when it is screwed on. This reliably prevents leakage, drying out and sticking of the opening. The dosing attachment allows a fine dosing of the adhesive.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Sparkplug NGK CM6 temporarily out of stock	TYGON tubo 1 m Diam. 3.4 x 2.0 mm temporarily out of stock	Tygon tube 6.35 - 3.18 mm 1m temporarily out of stock
Propeller MENZ-S 23x8 temporarily out of stock	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) temporarily out of stock	Conector BEC female (10 pcs) temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
    Cianocrylate->
      BSI Cianocrilates
      Cyanocrylate R&G
      KAVAN Ciano
      Yuki Model
    Epoxy->
    Resin/Gelcoat
    Glass Bubbles
    Contact adhesive
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Receptor DUPLEX REX 7 Slim 2.4EX
114.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Extractor piñones 2.3/3.2 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
2 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
2 x	RF9 Flight Simulator with Spektrum Controller
1 x	EasyFLY Addon
1 x	Interface Jack Adapter IKARUS
1 x	Extinguisher CO2 - 2 Kg
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
2 x	Vest clothes Hispano Aviación
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	DPSI magnetic switch actuator (housing)
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Adapter lead MPX/EC3
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CC 05
2 x	CC 03
1 x	BEC 3A FOXY
2 x	5 LiPo XH>EH adapter
1 x	CC 01
1 x	DPSI Ampere battery backer
2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Cap Hispano Aviación
1 x	Connector Sub-D 2+5 Male
2 x	30 cm BEC cable (male)
1 x	Double conector with JR adapter and 200 mm extension
1 x	CC 02
2 x	Softshell Hispano Aviación
1 x	Dean "T" - Futaba Adapter
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
2 x	CM-3
1 x	Circlick securite
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	2 LiPo XH>EH adapter
1 x	Cabling for Fox MDM1 wings
1 x	Ventral support for AX-18/AX-60
1 x	SE Ring 250 mm (2 pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Small aluminium horn red (2pcs)
1 x	"L" servo arm 65x49 mm (2 pcs)
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 4 mm x 1000 mm
1 x	4 LiPo XH>EH adapter
1 x	Cabel charger transmitter GRAUPNER
2 x	SIMtransmitter 6 Mode 2
2 x	Interface Realflight Simulator
1 x	GameCommander USB Universal
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	FA27.2×8.9 Prop-2PCS/PAIR
1 x	Propeller set 400 (2R+2L)
1 x	TS832 to Gopro AV/Power Cable
1 x	Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x	wire tensioner (black)
1 x	Rubber bushing with bracket "B" type (2 pcs)
1 x	wire tensioner (blue)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Threaded coupler M2 (10 uds)
1 x	Set clevis for pull-pull (TY13233 & TY13234)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Pulley brass 8/2 (2 pcs)
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Round Rod 1.0x3.5 cm
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	Turnbuckle M2,5x27/43 (2pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Threaded coupler M2 (10 pcs)
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Towing hook <3m
1 x	DPS Switch JR/JR
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x	Ventus 1:4 set of instruments
1 x	Compact on-board starting system (9724)
1 x	Reed valve for DA 50-R
1 x	GLOW 9C + accesories
1 x	1000 ccm complete gasoline fuel tank
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Extension 2/3 lipos JST/C
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Extension 2/3 lipos JST - JST/C
1 x	Male connector for 16 pines AWG
1 x	Male connector for 10 pines AWG
1 x	Extension 5 lipos JST/C
1 x	Male connector for 20 pines AWG
1 x	EWC6 40 cm wing connector
1 x	Fan for A60
1 x	Backmountset complete A40
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	1,2x1000 mm 2:1 black termoretract tube
1 x	15 cm PTFE-tubing for 25 mm tubes
1 x	Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x	Suction funnel for carburetor 90D-L (red)
1 x	24x10 prop Super Silence
1 x	Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x	Connector Sub-D 2+5 Female
1 x	DA 85 / DA 100 / DA 100 L carburetor
1 x	500 ccm complete gasoline fuel tank
1 x	700 ml complete glow fuel tank
1 x	Electronic double valve landing gear
1 x	Extra hard 250 ccm complete gasoline fuel tank
1 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Red smoke canister 140 g
1 x	EDF Stream-Fan 110mm kv780
1 x	White smoke canister 65 g
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	A60 Motor Mount Alu complete set
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm

6,064.16EUR