1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x CNC FPV Display screen&Transmitter Holder Vertical
3 x Digital Air Speed Sensor And Pitot Tube Set
1 x Oratex Red Fokker 10 m
1 x CC 03
1 x Spring lock washer 3.1 mm (20 pcs)
1 x Horn 6/35 with M3 Bearing
1 x 1/4 Pilot "Heidi"
1 x Aluminium cap bolt washer M3 black (8 pcs)
1 x Ventus 1:4 set of instruments
1 x Marker ties (20 pcs)
1 x M2,5 5Diam short black ball link V2 (2 pcs)
1 x 1/6 Pilot "Tony"
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Cable with accesories
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x Canopy Latch
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Ball link M3 (10 pcs, flat ball)
1 x Locking cable tie 4.6x203 (uds)
1 x Stainless steel cable Ø 0.5 mm (10 m)
1 x Lock washer 2.2 mm (20 pcs)
1 x Tape GFK 38 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Steering arm 12 mm Ø 4 mm (2 uds)
1 x 1/12 Pilot "Tom"
2 x Long pinned hinge (12 uds)
1 x BALSA trip 2.0x2.0x1000 mm
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Horn 6/27 with M3 Bearing
1 x Quicklock washer 3 mm (10 pcs)
1 x Suncover 100cc Red
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Carbon fiber rod 8.0 mmx1000 mm
1 x 30 cm BEC cable (male)
1 x Oracover GREY Seafire Sea 2m
1 x USB HLS prog. interface
1 x ABS tube 18.0x16.0x1000 mm
1 x 3l Smoke oil
1 x Extension silicon 10 cm (Graupner)
1 x Extension lead 15 cm Multiplex
1 x Smoke set "S"
1 x ABS tube 6.0x4.0x1000 mm
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x Black smoke bombs AX-60 (5 pcs)
1 x Circlick securite
1 x ABS tube 5.0x4.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Strip ABS 2.0x5.0x1000 mm
1 x Circlick securite
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Ventral support for AX-18/AX-60
1 x Strip ABS 2.0x8.0x1000 mm
1 x Smoke set "Glider"
1 x MPX-Dean "T" Adapter
1 x Oracover Black 10 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Small flex hinge (12 uds)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x L cockpit anchor "tipe F3A" (2 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x Extension silicon 25 cm (Futaba)
1 x 200 Newtons FEMA absorber
1 x Servo KST MS825 V8.0 35kg 8.4v
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Flap hinge 33x9 mm (6 pcs)
1 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Steering arm 12 mm Ø 3 mm (2 uds)
1 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Flap hinge (6 pcs)
1 x XPower XC3522/5 LS
1 x ROBART POINT HINGE 4,7mm (5 pcs)
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x Long pinned hinge (6 uds)
1 x Pin hinge 34x16 mm (10 uds)
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Cap closure 33/23.5mm (2 uds)
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x XPower XC4226/12 LS
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x SUS wire 3m (nylon coated)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Gates hinge aluminium (1 pcs)
1 x Motor XPOWER F2919/10 F5J Light
1 x Extension silicon 75 cm (Graupner)
1 x 120x60 mm SLH KOVO wheel
2 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
2 x Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
2 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
2 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
2 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
2 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
2 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x Absorver mount set for 5-10 Kg models
1 x Extinguisher CO2 - 2 Kg
1 x Extension silicon 50 cm (Futaba)
1 x PIX Hawk with accesories
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm)
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x Fibra de vidrio 80 g/m² (2 m x 100 cm)
4,948.91EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies