1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Cámara Sony 4140+673 CCD Board con emisor 5,8 GHz 200mw + antena
1 x Camara 800 TVL CMOS para FPV
1 x Sensor RPM Optico para Dinamometro
1 x Cable S.BUS 3 salidas 100 mm
1 x Prolongador cable servo POWERBOX 75cm
1 x Extension silicona 30 cm macho (Graupner)
1 x Prolongador silicona 100 cm (Graupner)
1 x Cable S.BUS 3 salidas 300 mm
2 x Prolongador Futaba 100 cm Ø 0,35 mm
1 x Extension silicona 30 cm macho (Futaba)
1 x Prolongador cable servo POWERBOX 25cm
1 x Extension silicona 30 cm hembra (Futaba)
1 x Prolongador servo 15cm MULTIPLEX
1 x Extension silicona 30 cm hembra (Graupner)
2 x Prolongador 90 cm (Futaba)
2 x Prolongador S-Bus JR/JR 20cm
1 x Prolongador servo 20 cm HITEC/JR
1 x Prolongador S-Bus 1-2 silicona 30 cm
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Prolongador S-Bus JR/JR 10cm
1 x Prolongador cable servo 0,14 PVC, conector ZH micro
1 x Prolongador Futaba macho 40 cm de silicona
1 x Cable silicona "Y" 30 cm (Graupner)
2 x Circlick seguridad
1 x Prolongador S-Bus 1-2 silicona 120 cm
1 x Prolongador cable servo 0,14 PVC, conector ZH micro
2 x Prolongador 7.5 cm
1 x Prolongador 30 cm (Futaba)
1 x EasyFLY Addon
2 x Interface Jack Adapter IKARUS
2 x SIMtransmitter 6 Modo 2
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Interface Realflight Simulator
1 x Acople ALU M2 Ø 4 (2 uds)
1 x Liston ABS 2.0x5.0x1000 mm
1 x Liston ABS 2.0x3.0x1000 mm
1 x Horn aluminio roscado 6 mm con rótula
1 x Aro pasacable Ø25 mm (4 pcs)
1 x Soporte ECU Xicoy X-45
1 x Soporte FUEL DOT V3
1 x Batería Sanyo Eneloop AAA 1,2 V 800 mAh
1 x Batería Sanyo Eneloop AA 1,2 V 2400 mAh
1 x Batería Sanyo Eneloop TX 9,6 V Hitec
1 x Batería Sanyo Eneloop TX 7,2 V MPX
1 x Batería Eneloop RX 6,0 V JR 2500 mAh
1 x Actuador lineal HLS12-100210-7.4v
1 x Batería Sanyo Eneloop RX 4,8 V Futaba
1 x Soporte bateria LiPo V2 M (negro)
1 x Prolongador silicona 25 cm (Graupner)
2 x Bisagra de aluminio tipo PIN 3,0x50 mm desmontable (2 pcs)
1 x Tarjeta SD HC 8 GB
1 x Bisagra de aluminio tipo PIN 6x98 mm (2 pcs)
2 x Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
1 x Bisagra 15 mm reforzada
1 x Bisagra 25 mm reforzada
1 x Bisagra cilíndrica 33 mm Ø 2 mm (5 pcs)
1 x Liston ABS 1,0x5,0x1000 mm
1 x Varilla ABS 5,0x1000 mm
1 x Liston ABS 1,0x2,0x1000 mm
1 x Liston ABS I 3,5x1,75x330 mm
1 x Prolongador silicona 75 cm (Futaba)
1 x Prolongador silicona 75 cm (Graupner)
2 x Prolongador silicona 100 cm (Futaba)
2 x Suncover 100cc Red
1 x Bisagra Cabina Discus 2c, 2a, Ventus 2cx (2 pcs)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Cristal Universal RX 35.020 Ch 62
1 x Cristal Universal RX 35.140 Ch 74
1 x Interruptor SAFETY dos posiciones DC-16/14
1 x Receptor de satélite DUPLEX 2,4EX Rsat2
1 x DUPLEX 2.4EX MUI 75
1 x DUPLEX 2,4 EX MBar
1 x DSM 10 Dual Switch Mixer
1 x DUPLEX 2.4EX MFlow2 Gas 800
1 x Car Charger DC/DS-16
1 x DUPLEX 2,4 EX MUI150 Sensor
1 x Plancha carbono 350x150x3.0 mm
1 x Brazo servo aluminio V1-JR 1,0" M2 dorado
1 x Arandela conica ancha alumino M3 azul (4 pcs)
1 x Ball link aluminio M3 V1 azul (10 pcs)
1 x Bisagra 18 mm reforzada
1 x Bisagra cilíndrica 3,0 Ø x 10 x 48 mm (10 pcs)
1 x Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x Bisagra papel CA (12 uds)
1 x Cinta autoadhesiva 10 mm x 12m; Diente 0.5 mm
1 x Cargador HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA)
1 x Set piñones servo HITEC HS-645MG/5645MG/5685MH
1 x Prolongador silicona 10 cm (Futaba)
1 x Prolongador 15 cm (Futaba)
1 x Prolongador silicona 10 cm (Graupner)
1 x Prolongador PVC 150 cm (Graupner)
1 x Bateria LiFe TopFuel 3100 mAh 3s MTAG 30C
1 x Cristal Universal RX 35.130 Ch 73
1 x Helice carbono 9x4.7 * 22x12
1 x Jodel D.9 BeBe 2.400 mm Kit
1 x Eje rueda 4x16 mm (2 uds)
1 x Soporte trasero 30 mm para motor gasolina
1 x Ball link aluminio M3 V1 rojo (10 pcs)
1 x Arandela conica alumino M4 rojo (8 pcs)
1 x Soporte trasero 50 mm para motor gasolina
1 x Tapón antena V1 Futaba-JR (Plata)
1 x Arandela conica alumino M3 rojo (8 pcs)
1 x Sistema cierre negro doble cara 20x1000 mm
1 x Bisagra de compuerta/Flaps
1 x Base para servo
1 x Bisagra cilíndrica 67 mm Ø 4,5 mm (5 pcs)
1 x Bisagra Micro flexible (12 uds)
1 x Bisagra de nylon flaps 33x9 (2 pcs)
1 x Bisagra de nylon flaps/compuertas 27x10,5 (2 pcs)
1 x Bisagra cilíndrica 43 mm Ø 2,5 mm (5 pcs)
1 x Bisagra de compuerta aluminio (1 pcs)
1 x Bisagra larga con pin metalico (6 uds)
1 x Bisagra de Flaps 33x9 mm (6 uds)
1 x Bisagra cilíndrica 48 mm Ø 2,5 mm (5 pcs)
1 x Bisagra pin 34x16 mm (10 uds)
1 x Cable video GoPro con cable 5V
1 x Cinta autoadhesiva 26 mm x 16.80m; Diente 1.0 mm
1 x Set piñones servo HITEC HS-7950TH
1 x Prolongador silicona 50 cm (Futaba)
1 x Arandela conica alumino M3 negro (8 pcs)
1 x Bisagra de nylon 20x20x0,3 (10 pcs)
1 x Cable silicona hembra batt. receptor 30 cm (Futaba)
1 x Set bisagras indoor con horns integrados
3,113.49EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas