Top » Catalog » Motors & Turbines » Explosion » Gasoline » SAITO » AE710099

1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
Car/Trucks->
Motors & Turbines->
  Explosion->
    Oils/Smoke Liquids
    Gasoline->
      DA
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NGH motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      Spare DA
      Spare parts DLE
      Spare parts MVVS
      Spares Zenoah/ZG
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesories/Muflers
    Glow->
  Turbines->
  Electric->
  Rockets
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

21x14 BIELA propeller (3-blades) Pusher
89.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Long pinned hinge (6 uds)
2 x	76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
2 x	Gates hinge
5 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Small pinned hinge (12 uds)
2 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
2 x	Pin type hinge Al 6x98 mm (2 pcs)
2 x	18 mm reinforced hinge
2 x	Pin type hinge Al 3,0x50 mm (2 pcs)
2 x	67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
2 x	Gates hinge 30x16 mm (2 pcs)
2 x	Flap hinge (6 pcs)
2 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x	Pin type hinge Al 4,5x70 mm to wire (2 pcs)
2 x	Nylon hinge 20x15x0,3 (10 pcs)
2 x	15 mm reinforced hinge
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Unmounted aluminium pin 6x98 mm (2 pcs)
3 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Micro flex hinge (12 uds)
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
2 x	Long pinned hinge (12 uds)
1 x	Large flex hinge (12 uds)
2 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	6 mm ball link M3 (10 pcs)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Ball link M3 (10 pcs, flat ball)
1 x	Socket head long ball link M3 (2 uds)
1 x	Ventus 1:4 set of instruments
3 x	SE Ring 200 mm (2 pcs)
3 x	SE Ring 450 mm (2 pcs)
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
3 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Spikes Band (5 m)
2 x	20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	Tape GFK 38 mm
2 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	20x1000 mm Ring Strap Back To Back
4 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
2 x	SE Ring 240 mm (2 pcs)
1 x	Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x	1/10 Pilot "Jimmy"
1 x	Red smoke canister 140 g
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
3 x	Pin hinge 26x11 mm (10 uds)
2 x	Round flex hinge (12 uds)
2 x	ROBART POINT HINGE 4,7mm (5 pcs)
3 x	Small pinned hinge (6 uds)
2 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Soporte grifo FESTO (2 pcs)
2 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Angled clevis with threaded rod M3
1 x	Y-Hose connector 6-6-6 mm
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	Servo arm with 6 mm hole to FEMA 9800A
1 x	Landing gear strap small (4 uds)
1 x	Quick hose connector 6-6 mm
1 x	Ball link M2,5 (10 pcs)
1 x	M3/5Diam metal ball link V3 (2 pcs)
2 x	FEMA DEFLECTOR LEVER FOR WHEEL BRAKE,
3 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Tap FESTO 6-6 mm
1 x	M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x	Quick hose connector 4-4 mm
1 x	Quick hose connector 4-4 mm
1 x	Ball link M3 (10 pcs)
1 x	M3 Maxi ball link (2 uds)
1 x	M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x	Y-Hose connector 4mm
1 x	T-Hose connector 3-3-3 mm
1 x	Festo Adaptor Tygon Large/4mm
1 x	Servo arm with 4 mm hole to FEMA 9810A
2 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Ball link M2 (10 pcs)
1 x	Ball link M3 RPA's-UAV's
1 x	T-Hose connector 2-2-2 mm
1 x	Landing gear axle Ø 5 mm (2 uds)
1 x	Complet landing gear
1 x	Battery Protection Circuit Board 22.2v 6s
1 x	Sanyo RX Battery Eneloop RX 4,8 V Futaba
2 x	Head lower part New
1 x	Baering 3x8x4
2 x	Screws M1,6x6 Allen
1 x	Servo Fork
1 x	Cierva C30 Elevator
1 x	Sanyo RX Battery Eneloop 6,0 V JR
1 x	16mm Gear-Spotlight, 4W
1 x	RX Battery Eneloop 6,0 V JR 2500 mAh
1 x	ProgBOX MASTER Hacker
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Aluminium battery holder red
1 x	Head runner
1 x	Raer wall
1 x	Sanyo TX Battery Eneloop 9,6 V Hitec
1 x	Power MULTIlight
1 x	8Wx2 Navigation & Strobe, 11mm Red/White
1 x	LiPo Storage Box Standard 1 Type 1
1 x	Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora
1 x	Y Cable
1 x	Sanyo TX Battery Eneloop 9,6 V Futaba
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Blades 330mm
1 x	USB Interface Adapter
1 x	Head core
1 x	Steering lever
1 x	Motor wall
2 x	Bearing housing
1 x	Nut M2 securing
2 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
3 x	SE Ring 360 mm (2 pcs)
1 x	Carbon plate 350x150x1.0 mm
1 x	SE Ring 300 mm (2 pcs)
3 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	ULTIMATUM 2.0 m green/black
1 x	DOMINO 46-55 Trainer 1583 mm
1 x	Gates hinge aluminium (1 pcs)
2 x	Indoor hinge with servo arm integraded
2 x	Pin hinge 34x16 mm (10 uds)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	ULTIMATUM 2.0 m orange/blue
1 x	ULTIMATUM 2.0 PRO "McLAren"
1 x	PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x	15 cm PTFE-tubing for 25 mm tubes
1 x	1000 ccm gasoline fuel tank
1 x	3-blades 21x12carbon prop Super Silence
1 x	3-blades 20x10 carbon prop Super Silence
1 x	3-blades 28x12 carbon prop Super Silence
1 x	F-16 Scale 1:6, Electric retract landing gear
1 x	FELIX SportJet Blue 2200 mm
1 x	L-39 Albatros 1:4.75, Electric retract landing gear
1 x	Propeller 9x7 SlowFlyer
1 x	BULLIT Wing 840 mm
1 x	24x10 prop Super Silence
1 x	500 ccm gasoline fuel tank
1 x	28x12 prop Super Silence
1 x	F-16 Scale 1/6 G3 Airex Deco: AF 916F
1 x	500 ccm complete gasoline fuel tank
1 x	30x14 prop Super Silence
1 x	Pipa 3D F-16 Scale 1/6
1 x	L-39 Albatros 138"/3.5m lenght ARF
1 x	BD-5 Pro ARF
1 x	30cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x	ASPIRE Red ARF 2.000 mm, Set Alas
1 x	F-16 Falcon Black Knights 1:6 (1630 mm)
1 x	F9F COUGAR Grey ARF 1.562 mm
1 x	JP Hobby ER-120 Tricycle FELIX JR
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	MB339 CAMUFLAGE PNP 1790 mm
1 x	PC-21 2.880 mm SINGAPUR scheme
1 x	ASPIRE Red ARF 2.000 mm, Canopy
1 x	Metal ring front FEMA
1 x	Socket head ball link M3 (2 uds)
1 x	Blade holder lower
1 x	Lense for Spotlights, 20mm
1 x	Set luces Airliner 2.1m Wingspan Scale 1:14 Civil/Sport
1 x	8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x	Wheel Scale 1/4 Vintage 178 mm / 7" (1 par)
1 x	DUBRO - 102MM / 4" DIA BIG WHEELS (400RV) - 2PCS
1 x	Blade holder center
1 x	Cierva C30 simulated motor
1 x	Mudguard wheels 112/127 mm
1 x	SPARK Switch 5.9v
1 x	Nut M1,6
2 x	Bearing 3x6x2,5
1 x	DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS
1 x	Dubro Fuel Tank Cap/Fittings 2-24oz Tanks Gas
1 x	DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x	Wheel keeper washer
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	LA500 housing-lower cyclic
1 x	Fuselage Autogyro RAINBOW
1 x	Blade holder upper
2 x	SE Ring 250 mm (2 pcs)
2 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	Deposito DUBRO 360 ml - 12 oz
1 x	Ring 320 mm length (5 pcs)
1 x	Cinta Goldfix 1m
1 x	SE Ring 480 mm (2 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x	Waterproof adhesive tape, width 19mm, length 25m
1 x	SE Ring 350 mm (2 pcs)
1 x	SE Ring 330 mm (4 pcs)
1 x	Tape GFK 25 mm
1 x
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Tube support Ø 6mm (10 pcs)

40,952.76EUR