Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA17051

40.20EUR

MPS Gas-Cap-Powerswitch
[EMCA17051]

MPS Gas-Cap-Powerswitch (MPS = Magnetic Power Switch)

- Nicely shaped electronically power switch in Gas-Cap design for receiver sets, ignitions etc.
- The show stopper: turning On/Off is done with external magnet
- An inserted magnet means consumer is off, removing it turns it on ("remove before flight")
- The magnetically actuator is automatically tightened in its " Gas-Cap" by means of magnetically force
- The operating system is indicated by a bright shining blue ring
- Absolutely fail safe system concept due to a combination of Reed-Contact and Hall-Sensor
- The perfect switch - no ugly holes in the fuselage!
- Input voltage 6.0V ... 12.6V (up to 3S LiPo!)
- Continuous current 5A, peak current 20A
- Version including Robbe/Futaba connector (input and output)
- Highly flexible silicone strand with 0.5 mm2 cross section, about 30cm long
- High grade gold plated contacts (FCI)
- Mounting diameter: 15.5 mm, installation depth about 35mm

Delivery includes switching magnet, key ring, stainless steel screws, counter flange and operating instructions

temporarily out of stock

Reviews

Customers who bought this product also purchased

Opto Gas Engine Kill Switch temporarily out of stock	Propeller MENZ-S 17x10 temporarily out of stock	Propeller MENZ-S 18x12 temporarily out of stock
Cylidric hinge 33 mm Ø 2 mm (5 pcs) temporarily out of stock	Cable coupler M3 (10 uds) temporarily out of stock	PWC6 PowerWingConnector for 6 servos with fuselage socket temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

16x8 BIELA propeller (3-blades) Pusher
68.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Xplorer2 anemometro
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Oils Pumps Empty (1 liter)
1 x	Squared carbon wing joinner 5x5x220 mm
1 x	Xplorer3 anemometro
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Z Bender - S Type Tool
1 x	AC-10 pre-rotacion with motor
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Aluminium servo arm (2 uds)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	Hot Glue Stick GREEN
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Xplorer4 anemometro
1 x	Hot Glue Stick BLACK
1 x	Starter 12v (Max 90 and 15ccm)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Ferrita 27x14x7 mm
1 x	MPX Sub-D Adaptor
2 x	XH male balance (3S) connector (2 pcs)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Connectors banna oro 4 mm (M/F)
1 x	XH female balance (4S) connector (2 pcs)
1 x	XH female balance (2S) connector (2 pcs)
1 x	XH male balance (4S) connector (2 pcs)
1 x	Gold antispark 4 mm plug
2 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banna oro 6,0 mm (M/F)
2 x	Connectors banna oro 2 mm (M/F)
1 x	Fixed launching hook
1 x	30 cm DEANS female connector
1 x	XH male balance (2S) connector (2 pcs)
1 x	XH female balance (3S) connector (2 pcs)
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	Adjustable launching hook
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Optotronix Aurora Plug
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
2 x	Round Rod 1,0x1000 mm
1 x	Round Rod 6,0x1000 mm
2 x	ABS Strip 1.0x4.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Extractor piñones 2.3/3.2 mm
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Vacuum pump P1-N
1 x	Sparkplug ROSSI R8
1 x	1/6 Pilot "Buddy"
1 x	ALPHA 1000mm BL ARTR
1 x	Anchor 50 mm (2 uds)
1 x	Ancla Met. 16 mm (5 pcs)
1 x	Ancla 35 x 22 mm (2 pcs)
1 x	Railing L250 mm (10 pcs)
1 x	Anchor 25 mm (2 uds)
1 x	Coupling bush 5 - 5 mm
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	Soporte carbono MR30 (2 pcs)
1 x	Conector MT-60 (pair)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x	Digital precision scale up to 2000 g
1 x	Soldering PCBs 8pin, 5 pieces
1 x	Bag connector 2 mm
1 x	Connectors MPX black male
1 x	MPX Support (2 pcs)
1 x	Ferrita con funda
1 x	Wing conexion 2 servos Futaba 50 cm
1 x	Protector Connector Dean-T (1 pair)
1 x	Round Rod 2,5x1000 mm
2 x	Strip 2,0x2,0x330 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Strip 2,5x1,25x330 mm
1 x	2,3 mm Prop Adapter M6
2 x	6 mm Prop Adapter M8
1 x	6 mm Prop Adapter M8
1 x	3.2 mm Prop Adapter M6
1 x	DPSI magnetic switch actuator (PCB)
1 x	DPSI V-Match
1 x	DPSI LR-S (with push buttons)
1 x	DPSI 2001 RV
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
2 x	DPSI OCP Overload protection
1 x	DPSI RV Mini 5 (2008)
1 x	Optotronix X-Carrier
1 x	DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
2 x	DPSI RV Mini 5 Magic
1 x	Blind nut M3 (4 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Aluminium wide washer M4 Red (4 pcs)
1 x	Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs)
1 x	Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs)
1 x	Anodized aluminium M4x0,7x20 mm screw (4 blue pcs)
1 x	Aluminium cap bolt washer M4 blue (8 pcs)
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	Aluminium wide washer M3 red (4 pcs)
1 x	Aluminium wide washer M4 Gold (4 pcs)
1 x	Blind nut M5 (4 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 lilac pcs)
1 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Anodized aluminium servo M4x5/8 screw (4 red pcs)
1 x	Prop Shaft Adapter 5 mm/M8 "long"
1 x	3 mm Prop Adapter M6
1 x	Prop Shaft Adapter 8 mm/M12 "long"
1 x	3,2 mm Prop Adapter M6
1 x	2,3 mm Prop Adapter M6
1 x	AXI 2820/10 V2
1 x	DPSI Micro - RCS
1 x	A30-M/L/XL Backmountset complete
1 x	DUPLEX 2.4EX RC Switch
1 x	A40 Backmountset complete
1 x	Aluminium Hub for folding Props 55 mm M8 Shaft 6 mm
1 x	Propeller APC 13x4 Electric Pusher
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	Spring lock washer 2.1 mm (20 pcs)
1 x	Lock nut M2 (10 pcs)
1 x	Hexagonal Nut M3 (10 pcs)
1 x	M3 black washers (4 pcs)
1 x	Blind nut M6 (4 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Albatros red/white (Top Model)
1 x
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Avia spare fouselage CF reinforced (Top Model)
1 x	13 mm wing servo holder
1 x	18 mm wing servo holder
1 x	Astra wing Joinner (Top Model)
1 x	Astra (Top Model)
1 x	Prop Shaft Adapter 5 mm "long"
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	Axle for AXI 5330/xx motors
1 x	Bearing ZZ 6x16x5 for AXI 5330/xx
1 x	Propeller electric carbon 10.5x7
1 x	AXI 2808/16 V2
1 x	AXI 2814/20 V2 Long
1 x	AXI 2814/10 V2 Long
1 x	AXI 2826/10 V2
1 x	8 mm Adapter for AXI53xx
1 x	Frontal Adapter for AXI53xx
1 x	Heat sink for Optotronix LEDs
1 x	Heat-conducting adhesive (2x2ml), WLK DK 4
1 x	AXI 2814/12 V2 Long
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	AXI 2820/8 V2 Long
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	ABS Strip 1.5x4.0x1000 mm
1 x	Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x	Propeller APC 10x7 SF
1 x	Blue Aluminium lock nut M3 (4 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
1 x	Hexagonal Nut M2.5 (10 pcs)
1 x	Blue Aluminium lock nut M4 (4 pcs)
1 x	Flat washer 4.3 mm (20 pcs)
1 x	Lock nut M6 (10 pcs)
1 x	Screw M2x8 (10 pcs)
1 x	Socket Screw M2x3 mm (4 pcs)
1 x	Hexagonal Nut M4 (20 pcs)
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Quicklock washer 2 mm (10 pcs)
1 x	Circlik for shaft 2.3 mm (10 pcs)
1 x	Quicklock washer 1 mm (10 pcs)
1 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x	Albatros ,spare fuselage (Top Model)
1 x	11 mm wing servo holder
1 x	34 mm Alu spinner 3.17 mm pleg. propeller
1 x	Bidule 111 3000 mm
1 x	Bidule 55 V3 2460 mm
1 x	AXI 2820/8 V2
1 x	4 mm Prop Adapter M6
1 x	Motor Mega AC 16/25/02
1 x	5 mm Prop Adapter CN-Spinner
1 x	5 mm Prop Adapter M6
1 x	10 mm Prop Adapter M12
1 x	PT 20x13 EL Propeller
1 x	Propeller electric carbon 9.5x5
1 x	2.3 mm Adapter for 30 mm spinners
1 x	Propeller electric carbon 8.5x6
1 x	Propeller APC 11x5.5 Electric
1 x	Propeller POWER-PROP 16x10
1 x	Spinner 115 mm GFK
2 x	Hitec 20 mm servo arm
2 x	HITEC 20 mm servo arm with ball link
1 x	46 mm Futaba servo arm tandem with ball link
1 x
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Lock nut aluminium M2.5 (4 pcs)
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Vertical mounting servo holder
1 x	Futaba 25 mm servo arm with ball link
1 x	Hitec 38 mm servo arm with ball link
1 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	Adapter rotula M3
1 x	Futaba 24/30 mm servo pull-pull double arm with ball link
1 x	Hitec 52 mm servo arm
1 x	Futaba 2x20 mm servo double arm
1 x	Hitec 46 mm servo arm with ball link
1 x	Futaba 38 mm servo arm
1 x	Futaba 76/92 mm servo pull-pull double arm with ball link
1 x	Horizontal mounting servo holder
1 x	Futaba 20 mm servo arm
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Futaba 38 mm servo arm with ball link
1 x	HITEC 17 mm servo arm with ball link HITEC
1 x	Futaba 52 mm servo arm
1 x	XTorque CFK Servohebel 38 HITEC 25T
1 x	Hitec 25 mm servo arm with M3 ball link
1 x	Futaba 30 mm servo rounded arm
1 x	54 mm Futaba servo arm tandem with ball link
1 x	Futaba 50/60 mm servo pull-pull double arm with ball link
1 x	Futaba 17 mm servo arm with ball link HITEC
1 x	Futaba 25 mm servo arm with M3 ball link
1 x	XTorque CFK Servohebel 38
1 x	Hitec 25 mm servo arm with ball link
1 x	Futaba 54 mm servo arm with ball link
1 x	Futaba 46 mm servo arm with ball link
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	Release wax 250ml
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Hardener Aero EPH 161 (250 g)
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Digital scale up to 40 kg
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Foaming agent for epoxy resins 200 g
1 x	CA Glue fast 20g
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Mounting base Ms 12 mm

9,513.63EUR