2 x | SIMtransmitter 6 Mode 2 |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
3 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
2 x | ABS tube 20.0x18.0x1000 mm |
2 x | ABS tube 3.0x1.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Interface Realflight Simulator |
1 x | EasyFLY Addon |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Slave-cable USB Easy Sim |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
2 x | Brass rod Ø 0.5 mm x 1000 mm |
2 x | Interface Jack Adapter IKARUS |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Xplorer3 anemometro |
1 x | Xplorer2 anemometro |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
3 x | Hovercraft sailcloth |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Couple M4 for wire (10 pcs) |
3 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
2 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Cable coupler M3 (10 uds) |
3 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Black large kwik link (10 pcs) |
1 x | Cable coupler M2x66 (2 uds) |
2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | 6 mm M3 variable horn |
2 x | Horn 5/20 with M2 Bearing |
3 x | 5 mm M2 variable inclined horn |
3 x | Horn 6/27 with M3 Bearing |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
3 x | Horn 6/20 with M3 Bearing |
2 x | 6 mm blue aluminium threaded horn with patella |
1 x | Brass control horn M3 short for wire (2 pcs) |
2 x | 6 mm red aluminium threaded horn with patella |
2 x | 6 mm aluminium horn with patella |
2 x | Horn F3A de Titanium 16 mm (2 units) |
2 x | Horn 6/35 with M3 Bearing |
1 x | 20 mm carbon horn |
3 x | Adjustable brass horn threaded M3 |
1 x | Horn 20x28,5 mm (2 pcs) |
2 x | 6 mm M3 variable inclined horn |
1 x | Horn 13,5x16 mm (2 pcs) |
2 x | Extra-long adjustable aluminium control horn 2,8x34 |
2 x | Cable with accesories |
2 x | Horn mando small (2 pcs) |
1 x | Extra long horn 60x30 |
2 x | Brass control horn M4 short for wire (10pcs) |
2 x | Control horn long w/ball |
1 x | Ball link M2 (10 pcs) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Propeller balancer |
1 x | Angle of incidence meter |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
2 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Z type of cable coupler Ø 2 (2 uds) |
2 x | Rudder forward 80x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
2 x | Kwik link with arm M3xM2xL24 |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | GameCommander USB Universal |
2 x | Carbon plate 350x150x1.0 mm |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Rocket D9-7 |
1 x | Xplorer1 anemometro |
1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
1 x | Straightened threaded rod M2-1m |
1 x | Xplorer4 anemometro |
2 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Threaded coupler M3 (10 uds) |
3 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Brass control horn M2 large for wire (2pcs) |
2 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
2 x | Pulley brass 2,5/1 (2 pcs) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | RH long aluminium horn (2pcs) |
1 x | Small aluminium horn red (2pcs) |
2 x | Crimping tool |
1 x | Stickers-digit for marking |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | Landing gear strap small (4 uds) |
1 x | Nylon threaded block M6 (2 uds) |
1 x | Nylon gear block Ø 5 mm (2 uds) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | PC-21 XXL 3.395 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Propeller RF CFK 13x7 |
1 x | PC-21 2.880 mm BLUE French Army Scheme |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | Futaba 2x20 mm servo double arm |
1 x | Hose stopper 4 mm |
1 x | Quick hose connector 3-3 mm |
1 x | Quick hose connector 4-4 mm |
1 x | Hitec 38 mm servo arm with ball link |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Futaba 38 mm servo arm with ball link |
2 x | Angled clevis with threaded rod M3 |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Futaba 52 mm servo arm |
1 x | ESC XREG 80 Amp 2-6 LiPo BEC 5V/3A |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Wire easy tensioner (red) |
1 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | wire tensioner (silver) |
1 x | Propeller 3x3 |
1 x | MB339 CANADA PNP 1790 mm |
1 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
1 x | Propeller CFK 14.5x10 Slim |
1 x | Electric Landing Gear ULTIMATUM 2.0 (Elektron Retracts) |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Propeller CFK 16x16 Slim |
1 x | PC-21 2.880 mm RED |
1 x | JP Hobby ER-120 Tricycle FELIX JR |
1 x | PC-21 XXL Bags |
1 x | Propeller CFK 12.75x13 |
1 x | Servo Dymond D 37 Eco |
1 x | Propeller CFK 14x6.5 |
1 x | VIPER JET G2 Esq. 3 Orange/Black |
1 x | VIPER JET G2 Esq. 5 Green/White/Blue |
1 x | PIX Hawk with accesories |
1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Coupling for 4 mm axis |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Regulador XC4018BA V2 (40Amp) |
1 x | ESC YGE 8 S |
1 x | ESC YGE 120 LVK |
1 x | Program Card KAVAN ES |
1 x | ESC KAVAN R-80SB SBEC 80A |
1 x | White aluminium 230 mm landing gear |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Rocket D3-P |
1 x | Rubber bushing with bracket "A" type (2 pcs) |
1 x | White large kwik link (10 pcs) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Pulley brass 8/2 (2 pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
1 x | Turnbuckle M2x29/43 (2pcs) |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
2 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | Horn mando long (2 pcs) |
2 x | Indoor hinge with servo arm integraded |
1 x | Propeller 9x7 SlowFlyer |
1 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | Propeller 11x4,7 SlowFlyer |
1 x | Pulley brass 6/1,5 (2 pcs) |
2 x | Porta Kwik link M4 4 mm (2 pcs) |
2 x | Rudder forward 70x28 "type Kato" |
1 x | Pulley brass 5/1,5 (2 pcs) |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | wire tensioner (red) |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
2 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Cable control set |
1 x | Pulley brass 10/2 (2 pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Long adjustable control horn with bearing |
1 x | Micro clevis (10 uds) |
1 x | 5 mm M2 variable horn |
1 x | Porta Kwik link M4 3 mm (2 pcs) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | Pulley brass 4/1,5 (2 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Pulley brass 2,5/1 (2 pcs) |
1 x | Horns indoor |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Horn for flap control (1 pcs) |
1 x | Long adjustable aluminium control horn with bearing 2,8x15 |
1 x | Pulley brass 12/2 (2 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Horn 5/10 with M2 Bearing |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Small adjustable control horn with bearing |
|
22,535.28EUR |