1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Jeti Black cap
2 x Z type of cable coupler Ø 1.8 (2 uds)
2 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x Ball link Aluminio M3 (2 pcs)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Ball Link ALU M3 - RH (1 pcs)
2 x Aluminium red ball links M3 V1 (10 pcs)
2 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
2 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Angled clevis with threaded rod M3
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Threaded coupler M3 (10 uds)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
2 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x Threaded coupler M2 (10 uds)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x MPX-Dean "T" Adapter
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x CC 03
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x CC 02
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Cabel charger transmitter GRAUPNER
1 x 
1 x Connectors banna oro 2 mm (M/F) (ultralight)
2 x Connectors DEANS 4 pins (1 pair)
1 x Locking cable tie 3.2x142 (uds)
1 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Locking cable tie 4.6x203 (uds)
1 x Solvent Plasti Dip 1000 ml
1 x "S" set for boats
1 x White smoke bombs AX-60 (5 pcs)
1 x "M" set
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x 20x1000 mm Ring Strap Back To Back
1 x SE Ring 250 mm (2 pcs)
1 x 1/6 Pilot "Buddy"
1 x Profile ABS half cane 4x1000 mm
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Stainless steel 4 m Pull-Pull complet set (max 20 kg)
1 x Turnbuckle M1,6x20/30 (2pcs)
1 x Wire easy tensioner (silver)
1 x Small kwik link (10 pcs)
1 x wire tensioner (red)
1 x Rubber bushing with bracket "A" type (2 pcs)
1 x Threaded coupler M2 (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
2 x MPX PCB "Gender-Changer (5 pcs)
3 x Connectors MPX male (PIN double)
2 x Connectors banna oro 8,0 mm 5 pcs(Female)
2 x Gold antispark 4 mm plug
1 x 25 mm carbon servo arm
2 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
2 x Aluminium servo arm (2 uds)
3 x MIG 29 3D RTF, Servo
3 x Servo arms set HS-60/81/85/5082MG/5085mg
2 x MPX housing with flange (4 pcs)
3 x Connectors MPX 8 pins with support (black) 1 pair (male-female)
1 x Connectors MPX 8 pins (green) 1 pair (male-female)
1 x Brass rod Ø 0.5 mm x 1000 mm
2 x Horns set HS-65HB/MG, 5065MG
2 x Connectors MPX male
2 x Mounting frame MPX female connector
1 x MPX screwable clips (5 pcs)
2 x Red 3m5 mm connector holder
1 x 
1 x Glass Bubbles (0,12 g) 350 ml
1 x Cotton Flocks, bag/ 500 g
1 x Extractor piñones 2.3/3.2 mm
1 x Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Ball Link M2 with Ball and Hardware, 10 pcs
1 x Connectors banna oro 2 mm (M/F)
1 x Propeller Pleg CAM-Prop 8x6
3 x Connectors MPX female
1 x Pulley brass 10/2 (2 pcs)
1 x White large kwik link (10 pcs)
1 x Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x Ø 0,5 mm Pull-Pull Kevlar Line (3 m)
1 x Pulley brass 12/2 (2 pcs)
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x Wheel collar 2 mm Ø (4 uds)
1 x Fast attachment for servos (25 pcs)
1 x Conector MR-60 (pareja)
2 x Servo DL3017 Digi 17Kg-0.15s/60º
1 x PIN Connector female (100 pcs)
1 x XH female balance (6S) connector (2 pcs)
1 x Motor Mega AC 22/20/03
1 x Motor Mega AC 16/15/07 COMBAT
1 x Servo Robbe FS 525 BB MG HV
2 x Servo arms set HS-65HB/MG/5065MG
1 x Metal gear set for HS85MG/5085MG
1 x Conector JAPAN G2 Set 5 pares
1 x 30 cm MULTIPLEX female connector
1 x MPX Support (2 pcs)
1 x Conector JR Servo male (10 pcs)
1 x Connectors DEANS (T)
1 x Conector JR Servo male (10 pcs)
2 x Servo arms set 40/50/55/5055 MG
1 x Connectors MPX black male
1 x Conector MT-60 (pair)
1 x Mounting frame MPX male connector
1 x XH male balance (8S) connector (2 pcs)
1 x MR30 connector male
1 x Conector FUTABA Servo female (10 pcs)
2 x Connectors MPX female (PIN double)
1 x Conector JR Servo female (10 pcs)
2 x MR30 connector female
1 x Conector XT-30 (hembra)
2 x Magnetic Connect locking system
1 x Kontronik connector (10 connectors, 5 pairs)
2 x Connectors MPX black female
1 x MPX PCB "6 Pins", 5 pieces
1 x Conector JR Servo female (10 pcs)
1 x Conector FUTABA Servo male (10 pcs)
1 x Servos wing assembly set HS 80/81/82/85
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x Conector XT-150 6mm (Set: 5 pares)
1 x Conector male bateria 1s Kavan/Walkera 10cm cable
1 x Protector Connector MPX (1 pair)
1 x Gens Ace 25C 1200mAh 3S1P 11.1V Saddle Airsoft Gun Lipo Battery
1 x XH male balance (9S) connector (2 pcs)
1 x XH male balance (6S) connector (2 pcs)
2 x Connectors DEANS (T) micro
2 x Metal gear set for HS81MG/5082MG
1 x XH male balance (7S) connector (2 pcs)
1 x XH female balance (9S) connector (2 pcs)
2 x Carbon servo arms for HITEC HS 65 (4 pcs)
1 x Servos security connector (2 pcs)
1 x Gold antispark 5,5 mm plug
1 x Conector JR Servo male (50 pcs)
1 x Contacto macho pin conector (10 pcs)
1 x Connectors banna oro 8,0 mm (M/F)
1 x XH female balance (7S) connector (2 pcs)
1 x Optotronix Aurora Plug
1 x Complete kit CAT 966G II WEDICO-construction-models
1 x Extinguisher CO2 - 2 Kg
1 x Motor Mega AC 16/07/06
1 x Mega Motor RC 400 F5J 1950KV
1 x Motor Mega AC 16/15/04 COMBAT
1 x Motor Mega AC 22/45/03 E
1 x Motor Mega AC 22/30/02
1 x Epoxy SLOW-CURE™ 30 min (130g)
1 x T-Motor U7-V2.0 Kv420
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Epoxy FINISH-CURE™ 20 min (130g)
1 x Motor 2212 (1000KV) Quadcopter F450
1 x 1804 2400KV Brushless Motor Qav 250 mini
1 x Electromagnets brake
1 x ER-50eVo Set A [2x ER50 + RB-45]
1 x ER40 Front Leg (with wheel 80mm)
8,001.04EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies