186.00EUR

PowerBox Smokepump JETs 2x outside
[POWER8015]


PowerBox Smokepump JETs 2x outside
Product description

The PowerBox Smokepump has been developed by PowerBox-Systems specifically for pumping smoke oil in model aircraft. The mechanical system and electronics are manufactured on our own premises, and the unit's high standard of quality is evident from its long effective life: the PowerBox Smokepump is the world's most durable smoke oil pump, as has been demonstrated in several long-term tests.

The mechanical pump system is assembled entirely from high-quality aluminium and brass parts. All our pumps are subjected to a running-in procedure during manufacture, ensuring that the gears mesh perfectly, and that the pump is 100% leak-free. Tight manufacturing tolerances eliminate the need for a separate cut-off valve with the PowerBox Smokepump.

The electronic circuit is infinitely variable within the range 0%-100%, allowing the pilot to fine-tune the flow rate to match the exact requirements of the model. The Smokepump can be powered either by a PowerBox or a separate battery.

If a separate battery is used, the electronic circuit switches to a "stand-by" mode if the receiver fails to pick up a signal. This means that it is not necessary to provide a separate switch to isolate the PowerBox Smokepump from the battery when you switch the model off.

The PowerBox Smokepump is available in a Standard version and a Jet version, the later with higher throughput and twin outlets.

The maximum flow rate of the Smokepump (Order No. 8010) is around 750 ml./min., while the Smokepump Jet (Order No. 8015) is capable of around 950 ml. The set includes all the necessary connecting leads and a length of heat-resistant hose. The standard set also contains a Y-piece which can be used to connect both silencers of an opposed-twin (boxer) engine.

Features
Durable metal-geared pump
Infinitely variable flow rate from 0-100%
No external cut-off valve required
High maximum flow rate
Can be operated directly from the receiver power supply
Stand-by cut-off when used with separate battery
Compact design
Low current drain
Mounting facility

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state approx. 1.8 Ampere at 100%
Current drain Standby 10µA
Max. flow rate max. 950ml/min
Smoke medium Smokeöl „blue Max“ or 3W Smokeöl
Dimensions 79 x 31 mm
Weight 128g
Temperature range -30°C to +75°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Jeti Black cap
1 x 1/6 Pilot "Cindy"
1 x Civilian pilot "Pamela" size 9cm (Slimline)
1 x 1/6 Pilot "Garry"
1 x Pilot "Goose" (Slimline)
1 x Civilian pilot "Gramps" size 9cm (Slimline)
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x Piloto Jet "Red" 1/6 Scale
1 x 1/4 Pilot "Heidi"
1 x Piloto WWII USAAF 12" Scale 1/6 - 1/5
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Piloto jet 130 mm
1 x 1/6 Pilot "John"
1 x 1/12 Pilot "Tom"
1 x Tube Pitot to PIXHAWK
2 x Digital Air Speed Sensor And Pitot Tube Set
2 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x PPM Encoder Module
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Crimping tool
1 x 3 LiPo XH>EH adapter
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x Ventral support for AX-18/AX-60
1 x B4-0 rocket charges (6 pcs)
1 x Initior Receiver FRX2 Wireless
1 x Compact on-board starting system (9525)
1 x Encendido CDI RCAME 1/4*32 Single 120º
1 x Starter EM Gear Power 250
1 x Support pump Xicoy X45
2 x Support Flush MPX Conector (6 pcs)
1 x Support Filtro FESTO
1 x Support XT60 conector (2 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Rear cover O-ring 26/30 cc
1 x DA-50R Prop Hub
1 x Cylinder EME 35 cc
1 x One Way bearing for EME55 starkit with key
1 x Motor DLE 30 cc V2
1 x Flex-headers for Valach VM 85B2-FS
1 x Motor DLE 130 cc
1 x Motor EME 70 cc with autostarter
1 x Selfstarr EME35
1 x MVVS presuritation conection 26-175 cc
1 x Diaphragm Set Walbro 116/152cc
1 x EME ignition free wheel
1 x Light semi-synthetic Oil PUTOLINE TT (1l)
2 x Cylinder for DA-60 and DA-120
1 x Motor DLE 55 RA
1 x Spark Plug BRISK M14x1.25
2 x Piñon motor autostarter 60cc
1 x Combustible Glow "KAVAN" air/heli 10% nitro
1 x CDI EME 120cc
1 x Crankshaft DA-120
2 x Motor DLE 60 cc Twin
2 x Piston ring for motor 58/116 cc
1 x Motor DLE 120 cc
1 x Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x Ball bearing middle DA-50/DA60/VM120B2
2 x Smoke Oil Blue 5 l
1 x Motor DLE 20 cc
1 x Diaphragm set for ZG 74/80B, DA85/100/100L/120/200, VM170/210
1 x Ignition KOLM BX-155-2 Engine
1 x VALACH Motors VM 70 S1-4T
1 x Engine Kolm BX-155-2 with starter
1 x Crankcase gasket DA-100
3 x Aluminium-screw, M5x16mm Red
1 x Carb Carrier, red DA-85, DA-100L and DA-120
1 x Carburetorgasket DA-85, DA-100, DA-100L and DA-120
1 x Exhaust gasket DA-150
1 x PowerFuel RX V2 Fuel Pump
1 x JM electric Pump
1 x Smoke pump RCEXL
1 x Junta humo metalica G61 (DLE55RA/DLE61/DLE120)
1 x Compact on-board starting system (9512)
1 x Sparkplug 1/4-32 Glow
1 x Sparkplug DLE CM6
1 x Electric Fuel Pump 12v
1 x Spark motor OS nº 3
1 x PowerBox Smokepump JETs 2x outside
1 x Propadapter for motor A50-V3
1 x Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x Recess mount-rem. glow plug set
1 x 30 mm gas motor standoff
1 x Servo TOPMODEL STANDARD S3217
1 x Servo TOPMODEL DS1413 T
1 x 90x75 mm standart servo cover
1 x Servo TOPMODEL DS9010 T
1 x 90x60 mm standart servo cover
1 x 58 mm micro servo cover
1 x 57 mm micro-mini servo cover
1 x 35 mm gas motor standoff
1 x 5 mm gas motor standoff
1 x 10 mm gas motor standoff
1 x 90° TUBE-ANGLE Ø 28 mm
1 x 110 degree stainless steel bend D=18mm, widened to 20mm
1 x Canister combo DLE 55 cc
1 x Carburator joints for SAITO FA80/80GK/72/72GK
1 x D.A. Fueling Valve
1 x 10cm Flexible Stainless Steel Exhaust Tubing D=25mm
1 x DA-50R motor alumine support
1 x Support conector MPX (6 pcs)
1 x Carburetor diaphragm set DA-150/170
1 x Gasket for motor DA 50-R
1 x Gasket, Aluminium-Plate >reed valve carrier DA-170
1 x Gasket, Aluminium-Plate >reed valve carrier DA-85, DA-100L, DA-1
1 x Pine wood slat 3.0x5.0x1000 mm
1 x 7 mm gas motor standoff
1 x Servo TOPMODEL S7520 MG
1 x 50x45 mm micro-mini servo cover
1 x 18 mm wing servo holder
1 x 65 mm mini servo cover
1 x Z-shaped servo mount
1 x Extension Ø25mm x L: 60 mm
1 x Spring for jet needle, fits DA-60/70
1 x Exhaust gasket DA50R DA100 DA200
1 x Carburator spacer block DA-50R
1 x Metal gasket elbow/cilinder DA60R/DA120
1 x Carb spacer mounting block ,red DA-60/70
1 x Piston ring EME 35cc
1 x Pick up EME 55/60 cc
1 x Motor EME 60 cc with electric starter
1 x Combustible Glow "KAVAN" air/heli 15% nitro
1 x Cotter MVVS 45/50/58 cc
1 x Motor DLE 85 cc
1 x Motor D.A. 200 Magnesium
1 x 
20,096.10EUR
Manufacturers
Languages
Español English
Currencies