7.00EUR

Modulo reglaje avance V3
[RCXEL29-2202]


Modulo reglaje avance V3
This module will allow you to determine when the spark from the candle appears depending on the passage of the magnet in front of the sensor. The module plugs into the sensor, when the magnet passes in front of the sensor, the module makes a "beep" and an LED lights up.
The advance varies depending on the manufacturer and the characteristics of the engine, but it is generally between 28 and 30° before top dead center (TDC).
Mount the graduated disc on the crankshaft, bring the piston to top dead center (TDC), set the disc at 0 and lock it on the crankshaft. Ideally you would need a comparator to do this operation, but with a simple wooden rod slipped through the spark plug hole and a lot of care, you can do a very decent job.
All that remains is to mount the protractor on the crankshaft relative to top dead center and deduce the ignition advance angle. Which is generally between 28 and 30°. Then rotate the crankshaft 28 to 30° in the opposite direction to the normal rotation of the engine and position the support so that the sensor is then facing the magnet.
This module works with 4.8V~8.4V power supply
This module works with all hall effect sensor ignitions.


few units
few units

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Cable coupler M2,5 (2 pcs)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Cable coupler M2 (10 uds)
1 x Metal ball clevis M3 (10 uds)
1 x Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Kwik link AL M3 con Clip (2 pcs)
3 x 4 mm M3 red control terminal (4 pcs)
1 x Aluminium red ball links M3 V1 (10 pcs)
2 x Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Couple M4 for wire (10 pcs)
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Metal clevis M2,5 (10 uds)
1 x Cable coupler M3 (10 uds)
1 x Aluminium blue ball links M3 V1 (10 pcs)
1 x Kwik link with arm M5xM2,5xL30
1 x Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Black large kwik link (10 pcs)
1 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Cable coupler M2 (10 uds)
1 x Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x Cable coupler M2x66 (2 uds)
2 x Brass rod Ø 0.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 0.8 mm x 1000 mm
3 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened threaded rod M2-1m
1 x Pulley brass 2,5/1 (2 pcs)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
2 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Extension silicon 10 cm (Futaba)
1 x Extension 90 cm (Futaba)
1 x 1/12 Pilot "Cougar"
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x Vacuum bag, 1200 mm x 50 m
1 x XH female balance (4S) connector (2 pcs)
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Support XT60 conector (2 pcs)
1 x Support Filtro FESTO
1 x 120x60 mm SLH KOVO wheel
1 x Recessed MPX connector support (6 pcs)
2 x Landing gear axle Ø 4 mm (2 uds)
1 x Actuador lineal HLS12-100210-7.4v
1 x Hovercraft sailcloth
1 x Straightened rod Ø 14.0 mm x 1000 mm
2 x Brass rod Ø 1.0 mm x 1000 mm
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Straightened rod Ø 8.0 mm x 1000 mm
2 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Spinner 40 mm Black (Kavan)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Pin hinge 34x16 mm (10 uds)
1 x KAVAN CA Activator 150ml
1 x Adapter 4,0 mm M8
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x BETA 1400 ARF Red
1 x Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi
1 x Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud)
1 x FA27.2×8.9 Prop-2PCS/PAIR
1 x Pine wood slat 1.5x3.0x1000 mm
1 x Glases Moritz
1 x Sanyo RX Battery Eneloop RX 4,8 V Futaba
3 x Head core
2 x Screws M1,6x6 Allen
1 x Nut M1,6
2 x Socket head long ball link M3 (2 uds)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Combo KAVAN PRO 3536-1000 + RAY 40 SB
1 x Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x Ciano KAVAN Super Thin 20g
2 x Combustible Glow "KAVAN" air/heli 5% nitro
1 x Ciano KAVAN Medium 20g
1 x Threaded coupler M3 (10 uds)
1 x Threaded coupler M2 (10 uds)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Adapter 5,0 mm M8
1 x Adapter 3,0 mm M6
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x BABY glider drawings (Aero-naut)
1 x Kobuz 5000 mm (Airwold)
1 x THERMIK XL 4000 mm
1 x Glider Ka 7 Red (2540mm)
1 x FANTASY ARF 3.2m
2 x Chili Race F3K (aramid nose)
2 x Astra (Top Model)
1 x VAGABOND 1500 mm ARF V2 (Blue)
1 x Gracia Maxi ARF (Top Model)
1 x IKURA 4.0 m
1 x VAGABOND 1500 mm ARF V2 (Red)
1 x Fox MDM 1 4000 mm DeLuxe,cabina
1 x Canopy Sweet / Siesta
1 x Kavan Car 25% nitro 1l
1 x Propeller set 400 (2R+2L)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Landing gear Rocket 400
1 x Cooler motor type 280
1 x Cooler motor type 150
1 x Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x SE Ring 350 mm (2 pcs)
1 x DUBRO - BOLTON PRESSURE FITTING 6-32 (1 PC)
1 x Tape GFK 25 mm
1 x SE Ring 250 mm (2 pcs)
1 x TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x Cargqador GensAce IMARS III Pro Smart Balance RC
1 x Connectors banna oro 2 mm (M/F)
1 x Landing gear axle Ø 8 mm (2 uds)
1 x Crystal TX 35.010 Ch 61
1 x Crystal Universal RX 35.090 Ch 69
1 x Mini-Pix Esc 15 Amp
1 x EasyFLY Addon
1 x Crystal TX 35.100 Ch 70
1 x Crystal Universal RX 35.140 Ch 74
2 x Servo NARO Max Std
1 x 9x4.7 * 22x12 carbon propeller
1 x Crystal TX 35.180 Ch 78
1 x Crystal Universal RX 35.170 Ch 77
1 x Ball link M3 (10 pcs, flat ball)
1 x Futaba 50/60 mm servo pull-pull double arm with ball link
2 x Ball link M2,5 (10 pcs)
1 x Futaba 30 mm servo arm with M3 ball link
2 x Servo Fork
2 x Cierva C30 Body Spain
2 x Blade holder center
1 x Head upper part
2 x Head lower part
2 x Complet landing gear
1 x Cierva C30 simulated motor
1 x Bearing 3x6x2,5
1 x Blade holder lower
1 x Joint with bearing M2,5 22x5,5
1 x Socket head ball link M3 (2 uds)
1 x Joint with bearing M2 22x5,5
1 x Kit wheel loader 966G II without electrics, without hydrauli
1 x Brazo Servo XTorque 52 mm HITEC 25T-6
1 x Hitec 20 mm servo arm
1 x Conector MR-60 (pareja)
1 x 10 mm aluminium spinner (Kavan)
1 x Threaded coupler M2 (10 pcs)
1 x Gasket electric Fuel Pump
1 x Cierva C30 Elevator
1 x Head runner
1 x Head lower part New
1 x Blade holder upper
1 x Wheel keeper washer
1 x Balls 4 mm
2 x Screw M3x16
2 x Nut M2
1 x Raer wall
2 x Blades 330mm
1 x Screws flush mount M2
1 x Long ball link M2 (6 uds)
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Joint with bearing M3 22x5,5
1 x Ball link M3 (10 pcs)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Softshell Hispano Aviación
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Short ball link M3 (6 uds)
1 x Ball link M3 (6 uds)
1 x Ball link M3 RPA's-UAV's
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x Socket head ball link M3 (2 uds)
1 x 6 mm ball link M3 (10 pcs)
1 x Socket head long ball link M3 (6 uds)
1 x Short ball link M1.6 (6 uds)
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x M2/M1/6 3Diam short black ball link V1 (6 pcs)
1 x M3 INDUSTRIAL ball link (2 uds)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x Electric Fuel Pump 12v
1 x Ciano KAVAN Thick 20g
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x ASW 15 5000 mm (Airwold)
1 x Fournier RF-4D
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x ASK 21 6.8m
1 x Fox MDM 1 4000 mm Std.
1 x Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe
1 x Fox MDM 1 6000 mm
1 x Wings Bags JEEMO
24,301.80EUR
Manufacturers
Manufacturer Info
DLE Engines
Other products
Languages
Español English
Currencies