1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Comentarios
Aceptamos
Búsqueda Rápida
 
Use palabras clave para encontrar el producto que busca.
Búsqueda Avanzada
1 x Vela OXY 0,5 pulgadas2
1 x Set cintas unión paracaídas 145 cm
2 x Manga viento Ozone L -1200 mm
2 x Paracaidas rescate "RC-Evo-Cross"
1 x Paramotor BackPack XXS (sin accesorios)
1 x Piloto LUCAS ARTF
1 x Mochila OPALE paramodels
1 x Para-RC Mix
1 x Ballast 700gr OPALE
1 x Piloto MAX ARTF
1 x Paramotor Trike XL
1 x Hélice POWER-PROP 13x9 Izda
1 x Varilla acero Ø 14,0 mm x 1000 mm
1 x DUPLEX 2.4EX Central Box 210
1 x Hélice POWER-PROP 13x9
1 x Helice FALCON 20x9 carbono-gas
1 x Helice APC 14x8.5 Electric Pusher
1 x Hélice POWER-PROP 14x9 Izda
1 x Paracaídas P4
1 x Vela OXY 5.0 m2
1 x LASER 73" 1.85m (05) PILOT
1 x Varilla ABS 1,25x1000 mm
1 x Bisagra 25 mm reforzada
1 x AIREX® M060 lámina (amarilla) 1200x550x2,0 mm (20 pcs)
1 x Listón triangular de BALSA 8x8x1000 mm
1 x Termo-retráctil rojo tubo de 3,2x1000 mm 2:1
1 x Sistema cierre 320 mm largo (5 pcs)
2 x Interface Jack Adapter IKARUS
1 x Simulador RealFlight RF-9 Interlink-X (con emisora)
1 x Conector DEANS hembra 30 cm
1 x Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x Sistema cierre negro doble cara 20x1000 mm
1 x Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Rótula M3 con tornillo y tuerca(6 uds)
1 x Cuña desmoldeo roja (5 pcs) [40x20mm]
1 x Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Paracaidista
1 x Prolongador 15 cm (Futaba)
1 x Oracover CHROME 2m
1 x Sistema cierre 360 mm con abrazadera (2 pcs)
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x PVC termo-retráctil batería 37 mm transparente (1 m)
2 x Listón triangular de BALSA 6x6x1000 mm
1 x Liston de BALSA 2,0x10,0x1000 mm
2 x Liston de BALSA 8,0x8,0x1000 mm
1 x Abrazadera con letrero (20 pcs)
1 x Destornillador Torx® TX8
1 x Bisagra de Flaps (6 uds)
1 x CC 02
2 x Bisagra de compuerta/Flaps
1 x Hélice POWER-PROP 14x9
1 x Bisagra pequeña con pin metalico (12 uds)
1 x Extintor CO2 - 2 Kg
1 x Adaptador 2 LiPos XH>EH
1 x Conector "T" 6-6-6 mm tubo bomba vacio
1 x Bisagra de compuerta negra 30x16 mm (2 pcs)
1 x Bisagra de aluminio tipo PIN 4,5x70 mm desmontable (2 pcs)
1 x Cable "Y" carga 4 mm (2 IN-1 OUT)
1 x Bisagra papel CA (12 uds)
1 x Bungee HLG Premium
1 x Copiador 5 unidades de 20 cm
1 x Gafas Aspen
1 x Parte superior del rotor
1 x Helice XOAR 22x10 Electrica
1 x Housing-upper del cíclico LA500
1 x Soporte del rodamiento frontal LA500
1 x Bolas 4mm
1 x Rodamiento 3x8x4
1 x Hélice plegable CAM-Carbon 16x13
1 x Hélice plegable CAM-Carbon 13x8
1 x Helice Carbono 20x13 "blanca"
1 x Helice Carbono 15x7
1 x Líquido Humo AZUL Turbina 0,75 l
1 x Hélice 9x4,7 SlowFlyer
1 x Ball joint long
1 x Hélice 3x3
1 x Soporte inferior de las palas del rotor
1 x Hélice 10x4,7 SlowFlyer
1 x Hélice 9x7 SlowFlyer
1 x Palas de autogiro de 330 mm
1 x Helice XOAR 15x8 Electrica
1 x Carena delantera LA500
1 x Helice XOAR 16x7 Electrica
1 x Bahía de la batería
1 x Grub screw M3x3 shouldered (2 pcs)
1 x Núcleo del rotor
1 x Núcleo del buje del rotor
1 x Corona pre-rotación LA500
1 x Autogiro Cierva C30 Spain
1 x Palanca del cíclico LA500
1 x Pegatinas Cierva C30 versión española
1 x Bearing housing
1 x Motor simulado Cierva C30
1 x Autogiro LA500
1 x Hélice 11x4,7 SlowFlyer
1 x Eje de la cabeza rotora LA500
1 x Palas LA500
1 x Rodamiento 4/14/4 (5 pcs)
1 x Fuselaje Cierva C30
1 x Núcleo de la cabeza rotora LA500
1 x Enganche de las palas del rotor
1 x Tren de aterrizaje completo
1 x Helice XOAR 12x6 Electrica
1 x Helice 8x4 Electric
1 x Hélice plegable CAM-Carbon 11x6
1 x Hélice plegable CAM-Carbon 12x10
1 x Hélice plegable CAM-Carbon 10x7 Reverse Rotation
1 x Hélice plegable CAM-Carbon 12.5x9
1 x Hélice plegable CAM-Carbon 13x10
1 x Hélice plegable CAM-Carbon 14x10
1 x Hélice plegable CAM-Carbon 14x6
1 x Hélice plegable CAM-Carbon 15x10
1 x Hélice plegable CAM-Carbon 10x12
1 x Hélice plegable CAM-Carbon 10x6
1 x Hélice plegable CAM-Carbon 12x5
1 x Hélice plegable CAM-Carbon 15x8
1 x Helice Carbono 11x8
1 x Helice Carbono 14x10
1 x Helice Carbono 15.5x10
1 x Helice RF Carbono 10x17
1 x Helice Carbono 18x16
1 x Helice Carbono 15x13
1 x Helice Carbono 18x17
1 x Helice Carbono 14x6.5
1 x Bancada servo ala 13 mm
1 x Endurecedor MEKP 100 g
1 x Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg
1 x Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x Paracaidas XTRALITE S
1 x Tapa de servo micro 58 mm
1 x Liston de BALSA 10 x 10 x 1000 mm
1 x Bayoneta aluminio ø35×1.5 mm x 500mm
1 x Listón de PINO 3,0x5,0x1000 mm
1 x Listón de PINO 3,0x10,0x1000 mm
1 x EasyFLY Addon
1 x Listón de BALSA 4,0x4,0x1000 mm
1 x Borde Salida BALSA 35x8x1000 mm
1 x Servo Robbe FS 525 BB MG HV
1 x Listón de HAYA redondo 2,0 x 1000 mm
1 x Bancada servo ala 11 mm
1 x Anemometro Xplorer1
1 x Resina Epoxy L-385 con catalizador H385 (3.5 kg total)
2 x Interruptor SAFET-SWITCH 12HV Twinbatt
2 x Interruptor magnético MPS para encendido
2 x Bisagra cilíndrica 2,5 Ø x 8 x 33 mm (10 pcs)
2 x Bisagra de compuerta 30x16 mm (2 pcs)
2 x Servo slow down unit (0,7-14,7 sec)
1 x Interruptor SPS 70v 60/120A
2 x Bisagra correa de latón en miniatura 1m
2 x Bisagra Larga flexible (12 uds)
1 x Bisagra larga con pin metalico (12 uds)
7,145.13EUR
Fabricantes
Información del Fabricante
Saito
Otros productos
Idiomas
Español English
Monedas