1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x U Profile ABS 5,0x10,0x1000 mm
1 x L-Connector 4.0 mm x 1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
2 x ABS "T" angle 2.0x2.0x1000 mm
1 x Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
2 x U Profile ABS 8,0x4,0x1000 mm
2 x U Profile ABS 3,0x6,0x1000 mm
1 x Flat Connector 4.0 mm x 1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
1 x Profile ABS half cane 2.0x1000 mm
2 x L-Connector 1.5 mm x 1000 mm
2 x Profile ABS Square 4 x 1000 mm
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x ABS angle 6,0x6,0x1000 mm
2 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x Receiver RSF08SB comatible FUTABA
1 x Squared carbon wing joinner 5x5x220 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
2 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 10 mm x 1000 mm
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Straightened rod Ø 5.0 mm x 1000 mm
2 x Straightened rod Ø 14.0 mm x 1000 mm
2 x Straightened rod Ø 3.0 mm x 1000 mm
1 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x Hovercraft sailcloth
2 x 
1 x Servo NARO Max Std
1 x DUPLEX 2.4EX MSpeed PITOT <300 Km/h
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x OPTIC 8 opto Rx-servo insulation
1 x DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
2 x Profile ABS triangular 4.0x1000 mm 60º
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x U Profile ABS 1,0x2,0x1000 mm
2 x ABS angle 5,0x5,0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x Support Pitot JETI
2 x Carbon fiber rod 16 mm x 1000 mm
1 x T-Connector 4.0 mm x 1000 mm
2 x Carbon fiber rod 1.5 mm x 1000 mm
2 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Straightened threaded rod M3 - 1m
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Straightened rod Ø 1.5 mm x 1000 mm
1 x DUPLEX 2.4EX MT 125 temperature sensor
1 x DUPLEX 2.4EX MU 3 Sensor
1 x DUPLEX 2.4EX MUI 150 Sensor
1 x DUPLEX 2.4EX MULi 6s M
1 x DUPLEX 2.4EX RC Switch
1 x DUPLEX MRMP Hall EX
1 x Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX
1 x DUPLEX 2.4 EX MBar
1 x DUPLEX 2.4EX Expander E4
1 x Duplex 2.4 EX TopFuel MTAG Battery Reader
1 x Oracover Black 10 m
1 x Oracover GREY Seafire Sea 2m
1 x Cotton Flocks, bag/ 500 g
1 x SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x SLICK 360-A 104" (2640 mm)
2 x Motor OS 3820-1200 electric
1 x Motor OS 3805-1200 electric
1 x 18m Fitting barb
1 x 1/6 Pilot "John"
1 x 1/4 Pilot "Mike"
1 x 1/12 Pilot "Tom"
1 x 110x55 mm C SLH KOVO wheel
1 x 2,3 mm Prop Adapter M6
1 x Receiver RFA05 5Ch compatible FUTABA
1 x Receptor CORE PBR-26XS 26ch
1 x 
1 x 100x50 mm SLH KOVO wheel
1 x 1/7 Pilot "Japanese"
1 x 102 mm aluminium spinner
1 x 102 mm INO spinner (carbon imitation)
1 x 120x60 mm C SLH KOVO wheel
1 x La Capitania di Venetia accesories
1 x 5 mm Prop Adapter CN-Spinner
1 x 3.2 mm Prop Adapter M6
1 x Prop Shaft Adapter 5 mm "long"
1 x 4 mm Prop Adapter M8
1 x 5 mm Prop Adapter M8
1 x Aero-Master Wings (Aero-naut)
1 x Stick coupler Ms 15 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x MG cannon 1.8 cm (5 pcs)
1 x Receiver R7008HV comatible FUTABA
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Landing gear retract neumatic (Jet Legend)
1 x Servo KST X15-1208 V8.0 13.5Kg HV
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Pegamento Pu R 50g polyuretano
1 x KATANA DV 20 1470 mm
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Motor OS 81 FS 4T
1 x Motor OS FS 95 AX
1 x Motor OS 50 SX-Hyper
1 x Thixotropic agent TM 100, tin/ 75 g (approx. 1 l)
1 x Pilatus PC-21 2100 mm RED/WHITE (SebArt)
1 x DC-3 Douglas (DAKOTA) 1800 mm Electric LG
1 x Pilatus PC-21 50E BLUE/WHITE (SebArt)
1 x SF260 SIAI MARCHETTI 50E yellow/black (SebArt)
1 x SF260 SIAI MARCHETTI 50E red/white (SebArt)
1 x Motor OS MAX 120 AX
1 x Skyray (RBC Kits)
1 x Pilatus PC-21 50E, Electric L.G (SebArt)
1 x Pilatus PC-21 2100 mm BLUE/WHITE (SebArt)
1 x Pilatus PC-21 50E RED/WHITE (SebArt)
1 x DORNIER DO 335 EP ARF 1724 mm
1 x YAK-23 "FLORA" (RBC Kits)
1 x Pilatus PC-21 50E, GLOW set conversion (SebArt)
1 x GROB G109 Elektro 2.770 mm
14,546.21EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies