1,800.00EUR

SAITO FG-120 TSS Boxer 4T
[AE710099]


SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x 500 ml sealer (DOPE)
1 x Nitroverdu 500 ml
1 x Release wax 250ml
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Plasti Dip Liquid Tape 429 ml black
1 x 1000 ml sealer (DOPE)
2 x Universal Colour Paste deep black 50 g
1 x 
1 x Spray Graphit 33
1 x Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x Spray YELLOW Inca Lexan 150ml
1 x Silent-blocks DLE 170M
1 x LH long black aluminium horn L31xH30 (2pcs)
1 x T-Motor MN705-S Kv125 (pack 2 uds)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x Motor OS 3820-1200 electric
1 x Pilot LA 500
1 x LA500 Blades
1 x Painting GHT Lexan Black 150 ml
1 x 20 g tin paste
1 x Universal Colour Paste deep black 250 g
1 x Presto SF Light Filler styrene-free (420 g)
1 x LA500 front gear holder
1 x Servo Arm aluminium ALU-STAR
1 x Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x Sun Cover PC 21 XXL (JMB Jets)
1 x Plastic caps for AIR BURTS (30 pcs)
1 x White smoke bombs AX-60 (5 pcs)
1 x Motor Mega AC 16/07/04
1 x JETI transmitter DC-14 II Blue Multimode
1 x Emisora JETI Duplex DS-16 II Carbon Line RED
1 x JETI transmitter DC-14 II Red Multimode
1 x Transmitter Balancer Futaba T-10CG
1 x PHASOR RACE 2035/4100 1D
1 x Wing tips support for AX-18/AX-60 (2 pcs)
1 x Red smoke bombs AX-60 (5 pcs)
1 x Rocket D3-P
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x White smoke bombs AX-9 (10 pcs)
1 x Me-163
1 x Black smoke bombs AX-60 (5 pcs)
1 x Remote electric ignition system
1 x Motor Mega AC 22/45/03 E
1 x Motor Mega AC 22/20/03
1 x Baal link 4/14/4 (5 pcs)
1 x Rotorshape Autogyro
2 x Brass rod Ø 0.8 mm x 1000 mm
2 x Hand Pads for Tray JETI
2 x DUPLEX 2,4EX Brackets for Transmitter DC/DS
2 x switch 1-Spring-DOWN 3-position DS Tx DUPLEX 2,4EX
2 x Brass hexagonal rod Ø 4 mm x 1000 mm
2 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x Foam plastic plates (310x210x5 mm)
2 x Holder for DC Transmitter/Tray DUPLEX 2,4EX
1 x 11 mm wing servo holder
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Tx JETI Duplex DC-24 II Carbon Line Ruby
1 x Tx JETI Duplex DC-24 II Carbon Line Gray
1 x Transmitter JETI Duplex DS-24 EX Carbon Line Dark GREEN Multimod
1 x Transmitter JETI Duplex DS-24 EX Multimode
1 x Transmitter JETI Duplex DS-12 SE Carbon RED
1 x JETImodel DPS 40
1 x Switch for DS: Long 2 Position
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x RC Power Switch 5A
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Bearing block for noseleg landing gear
1 x Black tray 2,4EX DC-16/14/24 black
1 x Aluminium sheet 500x250x0,5mm
1 x Charger LiPo Charger4
1 x 40,0 mm hydro-propeller (left hydropropeller)
1 x Switch for DC: Long 3 Position
1 x Coupling bush 5 - 5 mm
1 x Neck strap JETI DS
1 x DSM 10 Dual Switch Mixer
1 x Stick with Button DC/DS-16/14/24 Tx DUPLEX 2,4EX
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Screws of the Back Cover for DC Tx (10pcs.)
1 x DS-12/14/16 - Black nuts for upper switches - Front panel (2pcs)
1 x DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Mounting Stickswitch
1 x PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Bag JETI Duplex
1 x Avia (Top Model)
1 x Bidule 55 2460 mm Cabina
1 x Astra wing Joinner (Top Model)
1 x ACTIVE ARF Electric 1.995 mm
1 x Astra (Top Model)
1 x Neck strap JETI DC
1 x DUPLEX case for Jeti DS handheld transmitter
1 x Foam plastic plates (310x210x2 mm)
1 x switch 1-Spring-UP 3-position DC Tx DUPLEX 2,4EX
1 x DC24 II Transmitter case insert
1 x Solvent Plasti Dip 1000 ml
1 x EnLink 2RS Plus - DUO
1 x Flap hinge 33x9 mm (6 pcs)
1 x DUPLEX backpack for Jeti DS handheld transmitter
1 x Decorative caps, multicoloured, short
1 x Canopy Latch
1 x JETI Counter for DC-16 (Blue)
1 x PPM to Jack link - Tx Red (stereo) DC/DS Tx DUPLEX 2,4EX
1 x Foreman, scale 1:32
1 x Distanzstück motor OS 120 AX
1 x 40 mm 1/4" Race propeller (rigth hydropropeller)
1 x switch 1-Spring-UP 3-position DS Tx DUPLEX 2,4EX
1 x Beech dowels 4.0 x 1000 mm
1 x Screws of the Back Cover for DS14/16/24-Tx (8pcs.)
1 x 28 mm tailwheel unit
1 x Decorative caps, multicoloured
1 x Brass rod Ø 1.0 mm x 1000 mm
1 x Conector JAPAN G2 Set 5 pares
1 x Foam plastic plates (310x210x8 mm)
1 x DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS
1 x DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x Caps multicolor Switch JETI
1 x LA500 housing-lower cyclic
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14
1 x Harness for transmitter JETI DUPLEX
1 x BULLIT Wing 1095 mm
1 x Canopy Sweet / Siesta
1 x 13 mm wing servo holder
1 x Electric spoiler 300 mm (2 pcs)
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x IKARUS plane
1 x Challenger ARF (Top Model)
18,420.40EUR
Manufacturers
Manufacturer Info
Saito
Other products
Languages
Español English
Currencies