Inicio » Catálogo » Motores y Turbinas » Explosión » Gasolina » SAITO » AE710099

1,800.00EUR

Motor SAITO FG-120 TSS Boxer 4T
[AE710099]

SAITO FG-120TSS Boxer gasoline engine 2-cylind 4T engine 120cc
With a displacement of 121.6cc, the FG-120TS is currently the most powerful engine in the Saito range and is ideal for aerobatic models in the 70cc class as well as scale and semi-scale models in the 70-100cc class.
Two-blade propellers in the 27x12" to 28x12" range can be used as propellers. The speed range is between 1000-6000 rpm.
With a FALCON 27x12" the engine reaches a maximum speed of 5000 rpm.

The fuel mixture should initially be 15:1 and can be changed to 20:1 after the running-in phase has been completed. SAITO recommends using the "Deluxe Materials PowerModel 2T-S" engine oil.
A battery larger than 1500mAh with a voltage range of 6-12V is required to operate the ignition. This means 2-3S Lipo or LiFe.

Specifications:
Bore: 48.0mm
Stroke: 33.6mm
Weight Body: Approx. 4,030g
Weight Muffler: Approx. 180g
Weight Ignition: Approx. 160g
Practical rpm: 1,000-6,000rpm
Prop: 27×12" - 28×12"

Who does not know them, the fantastically beautiful 4T engines from SAITO! For years known for highest quality and reliability. SAITO motors from the time of the (FA)ignition motors have become known. Always in 4-stroke design, in black housing with golden valve cover ( GK") or simply in silver-colored housing. Later followed modern large-volume (FG) petrol engines in different cylinder numbers. These new petrol engines quickly enjoyed great popularity, and from the outset they were regarded as powerful and reliable. Gasoline engines have a lower fuel consumption than ignition motors and the fuel is also much cheaper. The electronic ignition makes it possible to start the engines without an annealing device, which significantly improves the operating comfort compared to earlier engines. Commercially available standard gasoline is usually used in combination with high-quality 2T oil in a 15-20:1 ratio. A manual and in English language is enclosed with the engine.

Box contents
FG-120TS Boxer petrol engine 2-cylinder 4T engine 120cc
Ignition system
Aluminium engine mount

Bajo pedido

Comentarios

Categorías

* OFERTAS MES *
Aviones->
Veleros->
Autogiros->
Helicópteros->
UAVs - RPAs->
Multicópteros->
Accesorios->
Coches / Trucks->
Motores y Turbinas->
  Explosión->
    Aceites/Líquidos Humo
    Gasolina->
      DA
      Despiece DA
      Despiece DLE
      Despiece MVVS
      Despiece Zenoah/ZG
      DLE Engines
      EME
      GAUI
      KOLM
      MOKI
      NHG motors
      OS Engines
      Roi-Import
      ROTO Motor - RM
      SAITO
      SEIDEL MOTOREN
      UMS Motor
      VALACH Motors
      Zenoah/ZG
      Accesorios/Escapes
    Glow->
  Turbinas->
  Eléctricos->
  Cohetes
Motores Gas. Paramotores
Acces. para Motores->
Parapentes/Paracaídas/Mangas
Barcos/Unidades navales->
FPV->
Robots->
Corte CNC
Portaequipajes
Crash kits
Zona Outlet->
2ª Mano
Merchandising HA

Que es lo Nuevo ?

Hélice BIELA 21x14 3Bl Pusher (Tripala)
89.00EUR

Información

Envíos y Devoluciones
Confidencialidad
Condiciones de Uso
Financiación
Aviso legal
Contacta con nosotros

Aceptamos

Búsqueda Rápida

Cesta de Compras

1 x	Sensor RPM Optico para Dinamometro
1 x	Polo Hispano Aviación
2 x	Pegatinas números para marcar
2 x	Arandela de bloqueo 2.5 mm (10 pcs)
2 x	Arandela 2.2 mm (20 pcs)
1 x	Arandela dentada 2.2 mm (20 pcs)
2 x	Circlick para eje 1.2 mm (10 pcs)
1 x	Arandela abierta 2.1 mm (20 pcs)
1 x	Arandela de bloqueo 1.5 mm (10 pcs)
2 x	Arandela de bloqueo 2 mm (10 pcs)
1 x	Arandela dentada 3.2 mm (20 pcs)
1 x	Circlick para eje 2.3 mm (10 pcs)
1 x	Arandela conica ancha alumino M3 rojo (4 pcs)
1 x	Arandela 1.7 mm (20 pcs)
1 x	Arandela conica alumino M3 verde (8 pcs)
1 x	Arandela conica alumino M3 rojo (8 pcs)
1 x	Arandela conica ancha alumino M3 azul (4 pcs)
1 x	Arandela dentada 2.7 mm (20 pcs)
1 x	Arandela 3.2 mm (20 pcs)
1 x	Arandela de goma M3-M4 (8 pcs)
2 x	Circlick para eje 1.9 mm (10 pcs)
2 x	Arandela abierta 2.6 mm (20 pcs)
1 x	Arandela conica ancha alumino M4 Azul (4 pcs)
1 x	Arandela conica ancha alumino M4 Negro (4 pcs)
1 x	Arandela conica ancha alumino M3 oro (4 pcs)
1 x	Arandela conica alumino M4 rojo (8 pcs)
1 x	Arandela 2.7 mm (20 pcs)
1 x	Arandela conica alumino M3 negro (8 pcs)
1 x	Arandela conica alumino M3 azul (8 pcs)
1 x	Arandela de bloqueo 3 mm (10 pcs)
1 x	Horn aluminio pequeño amarillo (2pcs)
1 x	Horn aluminio anodiazado 6 mm azul con rótula
1 x	Acople ALU M2 Ø 4 (2 uds)
1 x	Liston ABS I 10x5x1000 mm
1 x	Bisagra larga con pin metalico (12 uds)
1 x	Fibra carbono "MANGA" 12k 170 mm x 5 m
1 x	Acumulador polvo para limpieza moldes
3 x	Rótula V2 M2 5Diam negra (2 pcs)
1 x	Cable silicona 1,0 mm2 negro (50 m)
1 x	Motor DLE 200cc Premium Muffler
1 x	Liston de BALSA 10 x 10 x 1000 mm
1 x	Servo MKS HBL599 SL
2 x	Brazo servo 3,9 mm ZG20-ZG38
1 x	Servo HITEC D941 TW
1 x	Servo Robbe FS 525 BB MG HV
1 x	Servo MKS HV69
1 x	Bancada servo alas HS80/HS81/82/85 (2 pcs)
1 x	Servo Dymond D 37 Eco
2 x	Caja servo HS-225MG/225BB/5245MG
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Servo HITEC HS-45 HB, caja servo
1 x	Servo HITEC D-955 TW Titanium
1 x	Servo HITEC HS-5245 MG Digi
2 x	Servo HITEC HS-485 HB
1 x	Bancada Servo Dymond DS 1800 MG Digital (2 pcs)
1 x	Programador HPP-21 PLUS HITEC digital servos PC
1 x	Servo HITEC HS-5475 HB Digi
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	Varilla mando roscada M2,5 (2 uds)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm
1 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 4 m
1 x	Receptor CORE PBR-26XS 26ch
1 x	Bayoneta aluminio/strongal D35 mm/1 m
1 x	Bayoneta ULTIMATUM 2.0 m
1 x	PowerBox Mobile Terminal
2 x	Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m
1 x	Sistema para cables (plata)
2 x	Rótula V3 aluminio M3/5 Diam (2 pcs)
2 x	Rótula V2 corta M2 5Diam negra (2 pcs)
2 x	Rótula larga M3 con bola/base, tornillo y tuerca (2 uds)
2 x	Tornillo allen M2x5
2 x	Tornillo Servos M2x7/16 (4 pcs)
1 x	Arandela conica alumino M4 verde (8 pcs)
1 x	Tuerca autoempotrable M6 (4 pcs)
1 x	Adaptador de hélice 4 mm M8
1 x	Tornillo M2x16 PH
2 x	Tornillo allen M4x20 (10 pcs)
1 x	Tornillo M2.2x6.5 (10 pcs) Especial cabinas, tapas servos
1 x	Adaptador de hélice 4 mm M8
1 x	Adaptador de hélice 10 mm M12
1 x	Arandela de bloqueo 1 mm (10 pcs)
1 x	Adaptador de hélice 5 mm M8
1 x	Arandela abierta 4.1 mm (20 pcs)
2 x	Tuerca autoempotrable M4 (4 pcs)
1 x	Adaptador de hélice 3.2 mm M8
1 x	Tornillo allen M2x3 mm (4 pcs)
1 x	Adaptador de hélice 3 mm M5 (corto)
1 x	Arandela abierta 3.1 mm (20 pcs)
2 x	Rótula V3 aluminio M2,5 Diam con base corta (2 pcs)
1 x	Arrancador EM Gear Power 250
1 x	Chaleco Hispano Aviación
1 x	Actuador lineal HLS12-100210-7.4v
1 x	Servo HITEC HS-635HB Carbonite
1 x	Servo HITEC HS-85 MG
1 x	Servo MKS 6100 DS
1 x	SistemaLDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 mm
1 x	Servo HITEC HS-225 MG
1 x	Rótula con rodamiento M2,5 22x5,5
1 x	Rótula con bola M2 (10 pcs)
1 x	Rótula larga M3 con bola/base, tornillo y tuerca (6 uds)
1 x	Rótula V1 larga M2/M1,6 3Diam negra (2 pcs)
1 x	Palas LA500
1 x	Tornillo M3x0,5x8 mm Cabeza Plana Titanio (4 pcs)
1 x	Tornillo M4x0,7x20 mm Cabeza Botón alum. anodizado azul oscuro(4
1 x	Tuerca para insertar M4 (4 pcs)
1 x	Tornillo M2.2x13 (10 pcs) Especial cabinas, tapas servos
1 x	Tornillo M2.9x9.5 (10 pcs) Especial cabinas, tapas servos
1 x	Servo MKS HBL550
1 x	Servo MKS HV747
1 x	Servo HITEC HS-125 MG
1 x	Servo HITEC HS-7980TH digi high voltage ultra torque
1 x	Servo HITEC HS-7975 TG
1 x	Set piñones servo HITEC HS-85
1 x	Set piñones servo HITEC HS-645MG/5645MG/5685MH
1 x	Set piñones servo HITEC HS-81
1 x	Set piñones servo HITEC HS-311/322/325BB
1 x	Servo HITEC HS-82 MG
1 x	Servo HITEC HS-5485 HB Digi
1 x	Servo HITEC D954 TW
1 x	Brazo servo MKS Metal M3-L:30 (2 pcs)
1 x	Rótula metálica M3/3 azul (2 pcs)
1 x	Rótula V1 corta M2/M1,6 3Diam negra (2 pcs)
1 x	Rótula V2 corta M2,5 5Diam negra (2 pcs)
1 x	Soporte ventral para AX-18/AX-60
1 x	Rótula INDUSTRIAL con bola M3 (2 uds)
1 x	Rótula con bola M3 (10 pcs)
1 x	Rótula MAXI sin bola M3 (2 uds)
1 x	Servo MKS 6100 DS
1 x	Servo HITEC D85 MG
1 x	Tornillo allen M2,5x12
2 x	Tornillo allen M2x12
1 x	Tuerca para insertar M6 (10 pcs)
1 x	Tuerca autoblocante M2 aluminio azul (4 pcs)
1 x	Arandela conica ancha alumino M4 Rojo (4 pcs)
2 x	Tuerca para insertar M3 (4 pcs)
1 x	Tuerca autoblocante M2,5 aluminio (4 pcs)
1 x	Tornillo allen M3x16 (10 pcs)
1 x	Tornillo allen M3x30 (10 pcs)
1 x	Tornillo allen M2x10
1 x	Tornillo cabeza boton M4x12 mm (5 pcs)
2 x	Tuerca autoblocante M6 (10 pcs)
2 x	Tuerca para insertar M5 (10 pcs)
2 x	Tuerca hexagonal M4 (10 pcs)
2 x	Tuerca autoempotrable M8 (10 pcs)
1 x	Tuerca para montaje M6 (4 pcs)
1 x	Cable silicona 0,25 mm² rojo (25 m)
1 x	Adaptador de hélice 2,3 mm M6
1 x	Tornillo allen M2x8
1 x	Tornillo M1,6x6 (10 pcs)
1 x	Tornillo allen M3x5 (10 pcs)
1 x	Tuerca para montaje M3 (10 pcs)
1 x	Tuerca para montaje M3 (4 pcs)
1 x	Tuerca autoblocante M5 (20 pcs)
1 x	Tuerca autoempotrable M5 (4 pcs)
1 x	Tuerca para insertar hexagonal M3 Br (4 pcs)
1 x	Tuerca para montaje M4 (4 pcs)
1 x	Tuerca para montaje M5 (4 pcs)
1 x	Tuerca hexagonal M1 (10 pcs)

6,407.16EUR