Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » POWER6600

69.00EUR

PowerBox SparkSwitch RS
[POWER6600]

Product description
The SparkSwitch RS is a compact, high-performance ignition switch featuring rotational speed (RPM) monitoring and optional voltage regulation for 6V ignition systems. The SparkSwitch RS enables the user to switch the ignition on and off conveniently from the transmitter. The switched state can be checked at any time using the external LED or a telemetry status message. These features of the SparkSwitch RS enhance operating safety as well as simplifying the handling of petrol engines. In an emergency - such as the failure of a throttle servo - the SparkSwitch RS can be used to stop the engine quickly.
An important feature is galvanic separation between the receiving system and the ignition system. The switching process as well as RPM feedback from the ignition unit are optically isolated from the receiver. This ensures that a fault in the ignition system shielding, or any other defect, cannot cause interference to the sensitive receiving system.
The RPM (rotational speed) monitor input can be connected directly to the Tacho output of the ignition unit - if present. If your ignition system does not include a Tacho socket, we can supply a separate sensor RPM-Probe which can be connected in parallel with the Hall sensor. The RPM data can be transferred to any of the current telemetry systems: the SparkSwitch RS automatically detects the system in use, eliminating the need for adjustments using the USB interface.
The SparkSwitch RS can be supplied in either of two variants: with or without voltage regulation. The regulated variant reliably reduces the input voltage (max. 9.0V) to 6.0V. The version without voltage regulation passes the full voltage (max. 13.0V) through.

Features
Optical separation between the receiving system and the ignition system
External LED switch status indicator
Regulated (6.0V) or pass-through output voltage
RPM monitor for all current telemetry systems
Telemetry function for PowerBox, Jeti, Futaba, Graupner, Multiplex, Spektrum, JR
Failsafe mode
Machined aluminium heat-sink
Compact, low-profile format

Technical Data
Operating voltage 4.0 to 12.6V
Current drain Power-on state 19mA
Current drain Standby 0.2μA
Maximum load current max. 2A
Output voltage 6,0V / unregulated
Signal input PWM
Dimensions 56 x 29 x 10 mm
Weight 15 g
Temperature range -30°C to +105°C

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	PPM Encoder Module
4 x	PIX Hawk with accesories
2 x	Digital Air Speed Sensor And Pitot Tube Set
3 x	Tube Pitot to PIXHAWK
2 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
2 x	Carbon fiber rod 0.8 mmx1000 mm
2 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Carbon fiber flat 1000x3.0x1.0 mm
2 x	Carbon fiber flat 1000x3.0x0.13 mm
2 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	Squared carbon wing joinner 5x5x220 mm
2 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
3 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 3.0 mm x 1000 mm
2 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
2 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
2 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
2 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
2 x	Carbon fiber rod 8.0 mmx1000 mm
3 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 20 mmx1000 mm
3 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Carbon roving DowAksa / 24k / 1600 tex
2 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	Civilian pilot "G-Man" size 9cm (Slimline)
2 x	1/10 Pilot "Jack"
2 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x	1/6 Pilot "John"
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	1/12 Pilot "Fighter"
2 x	1/6 Pilot "Tony"
2 x	Pilot "Dick" Legends Series (Slimline)
2 x	Piloto JET 1:3,5
1 x	Ferrita 27x14x7 mm
2 x	CC 02
1 x	Adapter lead MPX/XT60
1 x	5 LiPo XH>EH adapter
1 x	4 LiPo XH>EH adapter
3 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	MPX-Dean "T" Adapter
2 x	TP/TopFuel - XH 2/3S Adapter
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	CC 03
2 x	Circlick securite
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Adapter lead MPX/EC3
2 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	2 LiPo XH>EH adapter
1 x	TrainerCord (master-learner)
1 x	USB HLS prog. interface
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	Dean "T" - Futaba Adapter
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	3 LiPo XH>EH adapter
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	30 cm BEC cable (male)
1 x	Cabel charger transmitter GRAUPNER
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Round Rod 1,25x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x	ABS tube 6.0x4.0x1000 mm
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Fiberglass plate 620x540x2,0 mm
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Foam plastic plates (310x210x5 mm)
1 x	Fiberglass 5000x1100 mm 49 g/m²
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
2 x	Fibra de vidrio 100 g/m² (50 m x 100 cm)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Fiberglass plate 620x540x0,3 mm
1 x	Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x	Glass fabric 25 g (2 m²)
1 x	ABS 500 x 400 x 1,5 mm (white)
2 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Carbon fibre sandwich sheet 350x150x3 mm
2 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
2 x	Peel ply 100 g/m² (plain weave) 50 cm x 2m
2 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
2 x	Peel ply 95 g/m² (plain weave) 100 mm x 100 m
1 x	Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x	Foam plastic plates (310x210x3 mm)
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Glass fibre braided sleeve (45mm) roll 10m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Release film 100 cm x 50 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x	Sheet Depron Aero 1250x800x3 mm
1 x	Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
1 x	Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x	Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x	Foam plastic plates (310x210x8 mm)
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	1/12 Pilot "Cougar"
2 x	1/7 Pilot "Japanese"
2 x	Pilot "Anthony" (Slimline)
1 x	Piloto jet 130 mm
2 x	Pilot JAN 1/4 Saiplanes
1 x	Pilot "Duke" Legends Series (Slimline)
2 x	1/4 Pilot "Heidi"
1 x	1/12 Pilot "Langley"
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	Pilot "Goose" (Slimline)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	1/6 Pilot "Cindy"
1 x	Ferrita con funda
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	Wheel collar 2 mm Ø (4 uds)
1 x	PC-21 2.880 mm RED
1 x	PC-21 2880 mm Propeller 5 blade 20x10 K45TP Scale composite
1 x	PC-21 2.880 mm WHITE/RED
1 x	Wheel collar 3 mm Ø (4 uds)
1 x	SPARK Switch 7.4v
1 x	Male connector for 12 pines AWG
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Connector Sub-D 2+5 Female
2 x	Carbon plate 350x150x1.0 mm
1 x	SWTU2 switch
1 x	Switching module high voltage SXH
1 x	Male connector for 10 pines AWG
1 x	Hacker X-Pro USB interface V2
1 x	Switc electronic 30 Amp
1 x	Cabling for Fox MDM1 wings
1 x	Opto Gas Engine Kill Switch
1 x	PowerBox SparkSwitch RS
2 x	Styrene plate 320x120x1.0 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon plate 700x550x0.5 mm
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Carbon plate 350x150x1.5 mm
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	Fibra de vidrio 80 g/m² (3 m x 100 cm)
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Glass fibre braided sleeve (45mm) roll 20m
1 x	Servo GO-1017MG 4.5 kg.cm 0.10s/60º
1 x	Sandwich carbon + poplar 3mm + carbon 480x290 mm
1 x	Servo GO-1070MG 40 kg.cm 0.10s/60º
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Motor Mega AC 16/25/04 COMBAT
1 x	Motor Mega AC 16/25/02
1 x	PC-21 XXL 3.395 mm
1 x	PC-21 2880 mm Tren aterrizaje electrico(Electron Retracts
1 x	AXI 2204 Multicopter
1 x	Electric Landing Gear FELIX SporJet 2.200mm
1 x	Brake for 140 mm wheels
1 x	Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b
1 x	Neck strap JETI DS
1 x	DUPLEX 2.4EX Expander E2
1 x	DUPLEX 2.4EX Central Box 320

25,334.92EUR