Top » Catalog » Hardware » Cables » POWER1009/1

2.50EUR

1 m servo "Premium" wire (white/red/blue)
[POWER1009/1]

Product description:
Premium servo cable is manufactured specially for PowerBox Systems. The cable is extremely flexible, and is made up using very thin individual strands in order to pass the maximum current through the given cross-sectional area of 0.35mm². The insulation is made of a special material which is also employed in full-size aviation. It is virtually indestructible, and offers excellent protection even when reduced to just a thin film around the copper conductor.

This insulation produces a weight reduction of about 30% compared with the conventional PVC. For comparison: in spite of its larger cross-section, the 0.35 mm² Premium cable offered here is lighter than standard 0.25 mm² PVC cable. The insulation is fire resistant, and its heat resistance is much higher than the usual PVC.

PowerBox Premium cable is available loose in 5.0 m or 10.0 m bundles. If you need different lengths, please contact us for a quote.

Features:
- 0.35 mm² cross section
- 30% weight saving
- Only 11g/m
- Fire resistant
- Robust isolation
- Employed in full-size aviation

temporarily out of stock

Reviews

Customers who bought this product also purchased

Aluminium red ball links M3 V1 (10 pcs) temporarily out of stock	Stainless steel cable Ø 0.88 mm - 60 kp (10 m) temporarily out of stock	Crimping sleeves for 1.1 mm cable (10 pcs) temporarily out of stock
Servoarm Aluminium SH-82 temporarily out of stock	Servoarm SH-81, two sides, aluminium temporarily out of stock	Esc MasterSPIN 99 Pro OPTO temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo KST BLS905X HV V2.0 8Kg 20mm
93.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	DPS Switch JR/JR
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x	CM-3
3 x	Circlick securite
2 x	CC 03
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
3 x	APM2.6 Power module with 5.3V DC BEC
1 x	Double conector with JR adapter and 200 mm extension
3 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
2 x	Connector Sub-D 2+5 Male
2 x	CC 01
2 x	2 LiPo XH>EH adapter
2 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Cabling for Fox MDM1 wings
2 x	30 cm BEC cable (male)
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Connector CAN 15
2 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	3 LiPo XH>EH adapter
2 x	Cabel charger transmitter GRAUPNER
2 x	4 LiPo XH>EH adapter
1 x	CC 05
2 x	CC 02
2 x	30 cm BEC cable (female)
1 x	Dean "T" - Futaba Adapter
2 x	MAX BEC
1 x	SBEC Jeti
1 x	MAX BEC 2D plus EX
1 x	Multi-adapter balancer JST - TP
2 x	PSC 6
1 x	SPS Remote switch actuator
2 x	Male Prolonger TP 4/5S
2 x	Extension 2/3 lipos JST/C
2 x	Interruptor SAFET-SWITCH 12HV Twinbatt
1 x	Extension 5 lipos JST/C - JST
2 x	Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	SPS 70V 100/200 A
2 x	Extension 6 lipos XH > EH
2 x	Servo slow down unit (0,7-14,7 sec )
1 x	Interruptor SPS 70v 60/120A
2 x	Prolonguer for Balancer Thunder Power 6S
1 x	Extension 5 lipos JST - JST/C
1 x	Extension 5 lipos JST/C
1 x	SWTU2 switch
2 x	SBEC 40
2 x	Pins M connect Multipin connectors AWG 20-24
1 x	Magnetic Interruptor MULTIPLEX
2 x	MAX BEC 2
2 x	Switching module high voltage SXH
1 x	Male/Female prolonguer for Balancer Thunder Power 6S
3 x	Interruptor RX/Batterie
1 x	USB interface ALTIS
1 x	Interface Realflight Simulator
1 x	Slave-cable USB Easy Sim
1 x	EasyFLY Addon
1 x	Simulador RealFlight RF-9.5 S (sin emisora)
1 x	Interface Jack Adapter IKARUS
1 x	Civilian pilot "Gramps" size 9cm (Slimline)
1 x	Xplorer1 anemometro
2 x	Extension 2/3 lipos JST - JST/C
1 x	Pilot "Anthony" (Slimline)
1 x	Switc electronic 30 Amp
1 x	Multi-adapter balancer JST/C - TP
1 x	SBEC 30 D
1 x	Piloto RC Civil 1/5- 1/6 Scale 12"
1 x	Xplorer4 anemometro
1 x	Long Switch On/Off micro
1 x	Adapter lead MPX/EC3
1 x	Futaba External voltage input cable Futaba CA-RVIN-700
1 x	MPX-Dean "T" Adapter
1 x	TP/TopFuel - XH 2/3S Adapter
1 x	5 LiPo XH>EH adapter
2 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	Adapter lead MPX/XT60
1 x	TrainerCord (master-learner)
1 x	DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x	BEC 3A FOXY
1 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	USB HLS prog. interface
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	Glases Aspen
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Connector Sub-D 2+5 Female
1 x	Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	Support ECU Xicoy X-45
1 x	SPS 70V 140/280 A
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	Three-position switched channel, short
1 x	Opto Gas Engine Kill Switch
1 x	Opto Gas Engine Kill Switch
2 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
2 x	GameCommander USB Universal
2 x	PowerBox SparkSwitch RS
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 675g
1 x	Hardener Aero EPH 161 (500 g)
1 x	resin-hardener L-385 H-385 (625 g)
1 x	resin-hardener L-385 H-385 (5000 g)
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg
1 x	Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x	Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg
1 x	PSC 5
1 x	Epoxy Resin L (2.5 Kg)
1 x	Civilian pilot "Joe" size 9cm (Slimline)
1 x	Civilian pilot "Pamela" size 9cm (Slimline)
1 x	1/6 Pilot "Buddy"
1 x	1/4 Pilot "Heidi"
1 x	1/6 Pilot "Tony"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	1/7 Pilot "Japanese"
1 x	1/10 Pilot "Jimmy"
1 x	1/12 Pilot "Tom"
1 x	1/12 Pilot "Langley"
1 x	1/12 Pilot "Fighter"
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	DPSI RV Mini 6 Magic with Gas-Cap switch
1 x	DPSI V-Match
1 x	Bec MR UBEC 5A (5v/6v/7v)
1 x	Carburador OS (Type 40K) 46AXII
1 x	Motor OS 81 FS 4T
1 x	Captador OS GT 33 cc
1 x	Axle for motor A50-L
1 x	JETImodel Addcap 820
1 x	Shaft for A60-20/22/24S (120 mm)
1 x	JETImodel Addcap 1640
1 x	Motor OS 46 AX II
1 x	Motor OS 3820-1200 electric
1 x	QUANTUM II 55 Brushless Motor
1 x	OS 37 SZ-H, Crankshaft
1 x	OS 40-FG 4T Motor
1 x	Bujia OS G5 gasolina
1 x	Motor OS MAX 160 AX
1 x	OS Engine 105HZ-R Heli with pipe 105
1 x	Motor OS FS-62V 4T

7,799.33EUR